Study guide
Section 8.1: Applied Algebra & Formulas
USPS Postal Exam 955 Technical Maintenance
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 USPS 955 Exam Structure & Scoring 1.2 Personal Characteristics & Experience Inventory 1.3 PSI Testing & Multicraft Test Strategy
2 Chapter 2: Electronics
Section 2.1: Digital Logic Gates & Truth Tables Section 2.2: Combinational & Sequential Logic Section 2.3: Analog Electronic Devices Section 2.4: Operational Amplifiers (Op-amps) & Filters Section 2.5: Power Supplies & Rectification Section 2.6: Electronic Schematic & Symbol Reading
3 Chapter 3: Electrical Fundamentals
Section 3.1: Ohm's Law & Circuit Calculations Section 3.2: Capacitance, Inductance & RC/RL Networks Section 3.3: AC & DC Power Fundamentals Section 3.4: Three-Phase Power & Motors
4 Chapter 4: Mechanical Systems
Section 4.1: Power Transmission & Machine Elements Section 4.2: Bearings & Lubrication Section 4.3: Hydraulic Principles & Components Section 4.4: Pneumatic Principles & Components
5 Chapter 5: HVAC & Refrigeration
Section 5.1: The Refrigeration Cycle Section 5.2: Refrigerants & Environmental Controls Section 5.3: Heating & Combustion Systems Section 5.4: HVAC Control Systems
6 Chapter 6: Computers, PLCs & Networking
Section 6.1: PC Hardware & Operating Systems Section 6.2: Industrial Networks & Cabling Section 6.3: PLC Fundamentals & I/O Systems Section 6.4: PLC Troubleshooting & Ladder Logic
7 Chapter 7: Spatial Reasoning
Section 7.1: Object Rotation & 3D Visualization Section 7.2: Paper Folding & Pattern Matching Section 7.3: Part Assembly & Mechanical Drawing Section 7.4: Spatial Visualization Strategies
8 Chapter 8: Mathematical Reasoning
Section 8.1: Applied Algebra & Formulas Section 8.2: Geometric Formulas & Measurement Section 8.3: Unit Conversions & Scale Section 8.4: Readout & Indicator Problems
9 Chapter 9: Industrial Safety & Standards
9.1 Lockout/Tagout (LOTO) Procedures 9.2 Electrical Safety & NFPA 70E 9.3 Workplace Hazards, PPE & SDS 9.4 Safe Tool Usage & Material Handling
Section 8.1: Applied Algebra & Formulas
Key Takeaways Explain This Topic AI
Ohm's Law (V = I * R) and Power (P = V * I) formulas can be rearranged to calculate voltage, current, resistance, or power.
Pulley and gear rotational speeds are inversely proportional to their diameters or number of teeth: D1 * N1 = D2 * N2.
Mechanical Advantage (MA) represents the ratio of output force (load) to input force (effort) or input distance to output distance.
A block and tackle pulley system's mechanical advantage is equal to the number of rope strands supporting the movable block.
Last updated: July 2026
Section 8.1: Applied Algebra & Formulas
Industrial maintenance technicians within the United States Postal Service (USPS) encounter complex mechanical and electrical systems daily. Keeping automated sorting systems—such as the Advanced Facer Canceler System ( AFCS ) and the Delivery Bar Code Sorter ( DBCS )—operating at peak efficiency requires more than just mechanical intuition; it demands the application of algebraic formulas. Technicians use algebraic reasoning to diagnose electrical faults, calculate motor belt tension, adjust gear ratios, and assess the efficiency of lift mechanisms. This section details the fundamental formulas and mathematical principles required for the USPS 955 exam, focusing on Ohm's law, gear and pulley calculations, force, and mechanical advantage.
Ohm's Law and Electrical Formulas
The baseline for all electrical troubleshooting is Ohm's Law , which describes the relationship between voltage, current, and resistance in an electrical circuit. It is expressed by the formula: V = I × R V = I \times R V = I × R
Where:
Voltage ( V V V ) is the electrical pressure, measured in volts (V).
Current ( I I I ) is the flow of electrical charge, measured in amperes or amps (A).
Resistance ( R R R ) is the opposition to current flow, measured in ohms ( Ω \Omega Ω ).
To solve for different variables in a circuit, a technician must be comfortable rearranging this equation:
Solving for Current ( I I I ) : Divide both sides of the equation by R R R . I = V R I = \frac{V}{R} I = R V
Solving for Resistance ( R R R ) : Divide both sides of the equation by I I I . R = V I R = \frac{V}{I} R = I V
In industrial applications, another vital set of calculations involves Electrical Power ( P P P ), measured in watts (W). Power represents the rate at which electrical energy is consumed or converted into another form, such as heat or mechanical motion. The fundamental power equation is: P = V × I P = V \times I P = V × I
By substituting Ohm's law ( V = I × R V = I \times R V = I × R ) into the power equation, we derive two additional formulas that are highly useful when only resistance and either voltage or current are known:
- Power using Current and Resistance : P = I 2 × R P = I^2 \times R P = I 2 × R
- Power using Voltage and Resistance : P = V 2 R P = \frac{V^2}{R} P = R V 2
- Worked Example: Ohm's Law and Power
Consider a heating element on a shrink-wrap machine. The heating element has a measured resistance of 16 Ω 16\ \Omega 16 Ω and is connected to a 120 -volt 120\text{-volt} 120 -volt power supply.
Step 1: Calculate the Current ( I I I ) I = V R = 120 V 16 Ω = 7.5 A I = \frac{V}{R} = \frac{120\text{ V}}{16\ \Omega} = 7.5\text{ A} I = R V = 16 Ω 120 V = 7.5 A
Step 2: Calculate the Power Dissipation ( P P P ) P = V × I = 120 V × 7.5 A = 900 W P = V \times I = 120\text{ V} \times 7.5\text{ A} = 900\text{ W} P = V × I = 120 V × 7.5 A = 900 W Alternatively, using the resistance-based formula: P = I 2 × R = ( 7.5 ) 2 × 16 = 56.25 × 16 = 900 W P = I^2 \times R = (7.5)^2 \times 16 = 56.25 \times 16 = 900\text{ W} P = I 2 × R = ( 7.5 ) 2 × 16 = 56.25 × 16 = 900 W
Pulley and Gear Formulas
Pulleys and gears are used to transmit rotational force and motion from drive motors to conveyor rollers, sorting bins, and vacuum pumps. The speed of rotation and the torque output of these systems are governed by the sizes of the pulleys or gears.
For two connected pulleys, the relationship between their diameters and rotational speeds is inversely proportional. This is expressed by the pulley ratio formula: D 1 × N 1 = D 2 × N 2 D_1 \times N_1 = D_2 \times N_2 D 1 × N 1 = D 2 × N 2
Where:
D 1 D_1 D 1 is the diameter of the driver pulley.
N 1 N_1 N 1 is the rotational speed of the driver pulley, measured in Revolutions Per Minute ( RPM ).
D 2 D_2 D 2 is the diameter of the driven pulley.
N 2 N_2 N 2 is the rotational speed of the driven pulley, measured in RPM.
For gear systems, because the pitch diameter of a gear is directly proportional to the number of teeth it has, we substitute the number of teeth ( T T T ) for the diameter: T 1 × N 1 = T 2 × N 2 T_1 \times N_1 = T_2 \times N_2 T 1 × N 1 = T 2 × N 2
Where T 1 T_1 T 1 and T 2 T_2 T 2 represent the number of teeth on the driver and driven gears, respectively.
Worked Example: Gear Speed Calculation
An electric motor turning at 1800 RPM 1800\text{ RPM} 1800 RPM is fitted with a driver gear having 15 15 15 teeth. This gear meshes with a larger driven gear having 45 45 45 teeth to drive a main conveyor shaft. Calculate the speed of the conveyor shaft ( N 2 N_2 N 2 ).
Step 1: Set up the formula 15 × 1800 = 45 × N 2 15 \times 1800 = 45 \times N_2 15 × 1800 = 45 × N 2
Step 2: Solve for N 2 N_2 N 2 27000 = 45 × N 2 ⟹ N 2 = 27000 45 = 600 RPM 27000 = 45 \times N_2 \implies N_2 = \frac{27000}{45} = 600\text{ RPM} 27000 = 45 × N 2 ⟹ N 2 = 45 27000 = 600 RPM The speed of the driven shaft is 600 RPM 600\text{ RPM} 600 RPM . This represents a 3 : 1 3:1 3 : 1 speed reduction ratio.
Force and Mechanical Advantage
Simple machines like levers, pulleys, and inclined planes allow technicians to lift heavy components (such as sorting motors and metal frame parts) by applying less input force than the weight of the load. This amplification of force is defined as Mechanical Advantage ( MA ). MA = Force out Force in \text{MA} = \frac{\text{Force}_{\text{out}}}{\text{Force}_{\text{in}}} MA = Force in Force out
Where:
Force out \text{Force}_{\text{out}} Force out is the resistance force or the weight of the load being lifted (output force).
Force in \text{Force}_{\text{in}} Force in is the effort force applied by the technician or actuator (input force).
In a frictionless, ideal mechanical system, mechanical advantage can also be determined by the ratio of the distance over which the input force is applied to the distance the load travels: MA = Distance in Distance out \text{MA} = \frac{\text{Distance}_{\text{in}}}{\text{Distance}_{\text{out}}} MA = Distance out Distance in
Levers and the Law of Moments
Levers consist of a rigid beam and a fulcrum (pivot point). Levers are divided into three classes:
Class 1 Lever : The fulcrum is positioned between the input effort and the output load. Examples include crowbars and pliers.
Class 2 Lever : The output load is between the fulcrum and the input effort. Examples include wheelbarrows and nutcrackers.
Class 3 Lever : The input effort is between the fulcrum and the output load. Examples include tweezers and human arms.
The algebraic relationship for a lever in equilibrium is described by the law of moments: Force in × d in = Force out × d out \text{Force}_{\text{in}} \times d_{\text{in}} = \text{Force}_{\text{out}} \times d_{\text{out}} Force in × d in = Force out × d out
Where d in d_{\text{in}} d in is the distance from the fulcrum to the input force, and d out d_{\text{out}} d out is the distance from the fulcrum to the output force.
Pulley Systems and Block and Tackle
Pulleys can be fixed or movable:
A fixed pulley is anchored to a structure. It has a mechanical advantage of 1, meaning it only changes the direction of the force.
A movable pulley is attached directly to the load. It has a mechanical advantage of 2 because the load is suspended by two parts of the rope, effectively cutting the required input force in half.
A block and tackle system combines fixed and movable pulleys. The mechanical advantage of a block and tackle is determined simply by counting the number of rope strands that directly support the movable block lifting the load.
If a block and tackle system has 5 supporting rope strands and is used to lift a 500 -pound 500\text{-pound} 500 -pound motor, the input force required (excluding friction) is: Force in = Force out MA = 500 lbs 5 = 100 lbs \text{Force}_{\text{in}} = \frac{\text{Force}_{\text{out}}}{\text{MA}} = \frac{500\text{ lbs}}{5} = 100\text{ lbs} Force in = MA Force out = 5 500 lbs = 100 lbs
To lift the motor 6 feet 6\text{ feet} 6 feet off the ground, the technician must pull: Distance in = Distance out × MA = 6 ft × 5 = 30 ft of rope \text{Distance}_{\text{in}} = \text{Distance}_{\text{out}} \times \text{MA} = 6\text{ ft} \times 5 = 30\text{ ft of rope} Distance in = Distance out × MA = 6 ft × 5 = 30 ft of rope
Summary Formula Reference Table
Concept Base Formula Rearranged Form (1) Rearranged Form (2)
Ohm's Law V = I × R V = I \times R V = I × R I = V R I = \frac{V}{R} I = R V R = V I R = \frac{V}{I} R = I V
Electrical Power P = V × I P = V \times I P = V × I P = I 2 × R P = I^2 \times R P = I 2 × R P = V 2 R P = \frac{V^2}{R} P = R V 2
Pulley Ratio D 1 × N 1 = D 2 × N 2 D_1 \times N_1 = D_2 \times N_2 D 1 × N 1 = D 2 × N 2 N 2 = D 1 × N 1 D 2 N_2 = \frac{D_1 \times N_1}{D_2} N 2 = D 2 D 1 × N 1 D 2 = D 1 × N 1 N 2 D_2 = \frac{D_1 \times N_1}{N_2} D 2 = N 2 D 1 × N 1
Gear Ratio T 1 × N 1 = T 2 × N 2 T_1 \times N_1 = T_2 \times N_2 T 1 × N 1 = T 2 × N 2 N 2 = T 1 × N 1 T 2 N_2 = \frac{T_1 \times N_1}{T_2} N 2 = T 2 T 1 × N 1 T 2 = T 1 × N 1 N 2 T_2 = \frac{T_1 \times N_1}{N_2} T 2 = N 2 T 1 × N 1
Mechanical Advantage MA = Force out Force in \text{MA} = \frac{\text{Force}_{\text{out}}}{\text{Force}_{\text{in}}} MA = Force in Force out Force in = Force out MA \text{Force}_{\text{in}} = \frac{\text{Force}_{\text{out}}}{\text{MA}} Force in = MA Force out Force out = Force in × MA \text{Force}_{\text{out}} = \text{Force}_{\text{in}} \times \text{MA} Force out = Force in × MA
Steps for Solving Multi-Step Algebraic Maintenance Problems
Identify the Unknown : Determine what variable the problem is asking you to solve for (e.g., speed of a driven gear, resistance of a coil, input force of a lever).
Select the Formula : Choose the equation that links the known variables with the unknown variable.
Isolate the Target Variable : Use algebraic operations to get the target variable by itself on one side of the equals sign.
Substitute and Calculate : Plug in the numerical values, ensuring all units are consistent (e.g., if voltage is in millivolts, convert to volts first).
Sanity Check the Result : Ask if the number makes physical sense. If a driven gear is larger than the driver gear, its RPM must be lower. If a pulley system has a mechanical advantage greater than 1, the input force must be less than the load weight.