Study guide

1.2 Contractor Classifications: B100, R100 & E100 Scopes of Work

Utah General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Utah Contractor Licensing & DOPL Regulation

1.1 DOPL Administration & Utah Construction Trades Licensing Act 1.2 Contractor Classifications: B100, R100 & E100 Scopes of Work 1.3 Licensure Qualifications: Experience, Qualifiers & Pre-Licensure Education

2 Chapter 2: License Maintenance, Unlawful Conduct & Disciplinary Penalties

2.1 License Renewal, Continuing Education & Inactive Status 2.2 Unlawful & Unprofessional Conduct, Citations & DOPL Sanctions

3 Chapter 3: Business Organizations & Utah Company Formation

3.1 Selecting a Business Entity: Sole Proprietorships, Partnerships, LLCs & Corporations 3.2 Utah Division of Corporations Registration, Assumed Names (DBA) & Formalities

4 Chapter 4: Estimating, Cost Accounting & Bidding Strategy

4.1 Quantity Takeoff, Direct Costs & Estimating Methods 4.2 Overhead Allocation, Profit Margin & Markup Calculations 4.3 Bid Preparation, Bidding Ethics & Bid Bonds

5 Chapter 5: Construction Contracts & Required Utah Provisions

5.1 Essential Contract Elements & Standard Agreement Types 5.2 Mandatory Utah Residential Contract Disclosures & Consumer Rights

6 Chapter 6: Subcontracting, Change Orders & Dispute Resolution

6.1 Subcontractor Agreements, Flow-Down Provisions & Coordination 6.2 Change Orders, Delay Claims & Alternative Dispute Resolution

7 Chapter 7: Utah Lien Law & State Construction Registry

7.1 Preconstruction & Construction Liens: Statutory Rights & Procedures 7.2 Utah State Construction Registry (SCR): Filings & Preliminary Notices 7.3 Lien Waivers, Statutory Forms & Residence Lien Recovery Fund (RLRF)

8 Chapter 8: Project Management, CPM Scheduling & Quality Control

8.1 Project Planning, Work Breakdown Structures & CPM Scheduling 8.2 Jobsite Logistics, Subcontractor Coordination & Documentation 8.3 Quality Control, Building Inspections, Warranties & Closeout

9 Chapter 9: Labor Laws, Employment Regulations & Payroll

9.1 Worker Classification: Employees vs. Independent Contractors 9.2 Fair Labor Standards Act, Wages, Overtime & Labor Standards 9.3 Utah Antidiscrimination Act, New Hire Reporting, Prevailing Wages & Payroll Records

10 Chapter 10: Construction Safety, OSHA & Utah UOSH Regulations

10.1 OSHA & Utah UOSH Framework, Safety Programs & Site Hazards 10.2 Fall Protection, Scaffolding, Ladders & Personal Protective Equipment 10.3 Excavations, Trenching, Confined Spaces & OSHA Recordkeeping

11 Chapter 11: Risk Management, Commercial Insurance & Surety Bonds

11.1 Commercial General Liability & Commercial Property Insurance 11.2 Workers' Compensation Insurance & Utah Statutory Requirements 11.3 Surety Bonds vs. Insurance: Bid, Performance, Payment & License Bonds

12 Chapter 12: Financial Management & Construction Accounting

12.1 Construction Accounting Methods: Cash, Accrual & Percentage of Completion 12.2 Financial Statements, Balance Sheet Analysis & Key Solvency Ratios 12.3 Cash Flow Management, Schedule of Values, Progress Billing & Retainage

13 Chapter 13: Construction Tax Laws & Reporting

13.1 Federal Business & Employment Taxes: FICA, FUTA & Income Reporting 13.2 Utah Construction Taxes: Sales, Use & Withholding Tax Regulations

1.2 Contractor Classifications: B100, R100 & E100 Scopes of Work

Key Takeaways Explain This Topic AI

A General Building Contractor (B100) possesses an unlimited vertical scope, authorized to construct, alter, or demolish any building or structure of any height, footprint, or occupancy class.

A Residential and Small Commercial Contractor (R100) is limited to residential structures of up to four units and commercial buildings not exceeding three stories in height or a 20,000-square-foot footprint.

A General Engineering Contractor (E100) is authorized to construct horizontal fixed civil works including highways, bridges, dams, pipelines, utilities, grading, and earthwork.

General contractors (B100 and R100) may self-perform framing, concrete, and finish trades, but Utah law strictly prohibits them from self-performing electrical, plumbing, or HVAC work unless they hold the specific specialty licenses.

Last updated: September 2026

Contractor Classifications: B100, R100 & E100 Scopes of Work

Quick Reference: Utah contractors are classified into specific scopes of practice under Utah Administrative Code R156-55a-301 . The B100 General Building Contractor has unlimited scope over any vertical commercial or residential structure regardless of height or square footage. The R100 Residential and Small Commercial Contractor is capped at dwellings of up to 4 units and commercial buildings of no more than 3 stories and a 20,000-square-foot footprint. The E100 General Engineering Contractor covers heavy civil infrastructure and utility networks. Operating outside the authorized scope of a classification constitutes unlawful conduct.

1. The Utah Contractor Classification System

Contractor licenses in Utah are not generic authorizations. Under Utah Code § 58-55-102 and Utah Administrative Code R156-55a-301, licenses are categorized into primary general classifications and specialized trade classifications. A licensee is legally restricted to contracting, bidding, and performing work strictly within the scope defined for their credential. ┌────────────────────────────────────────────────────────────────────────┐

  • │ Utah Contractor Classifications │
  • └───────────────────────────────────┬────────────────────────────────────┘
  • │
  • ┌──────────────────────────┼──────────────────────────┐
  • ▼ ▼ ▼
  • ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐
  • │ B100 │ │ R100 │ │ E100 │
  • │ General Building│ │Residential/Small│ │General Engineer │
  • │(Unlimited Scope)│ │ Commercial │ │ (Civil Works) │
  • └─────────────────┘ └─────────────────┘ └─────────────────┘
  • │ │ │
  • └──────────────────────────┼──────────────────────────┘
  • ▼
  • ┌─────────────────────────────────┐
  • │ Specialty Trades │
  • │ (S200–S700 Series Sub-Trades) │
  • │ Electrical, Plumbing, HVAC, etc.│
  • └─────────────────────────────────┘

Bidding on or executing a contract outside the scope of one's classification carries the same statutory penalties as operating without a license altogether. Understanding the precise boundaries between B100, R100, and E100 is critical for compliance and exam performance.

2. General Building Contractor (B100)

The B100 General Building Contractor license represents the highest and most comprehensive vertical building credential in Utah. It confers broad prime-contracting authority across all standard architectural construction.

Authorized Scope of Work

Under Utah Administrative Code R156-55a-301(2), a B100 contractor is authorized to construct, alter, remodel, repair, add to, subtract from, or demolish:

Any building or structure of every kind, nature, and description.

High-rise commercial office towers, hotels, and mixed-use structures with no story or height limitations .

Major industrial facilities, processing plants, and manufacturing complexes.

Institutional structures including hospitals, public high schools, university research laboratories, and correctional facilities.

Multi-family residential complexes of unlimited density (e.g., a 400-unit high-rise apartment building).

Custom luxury homes, residential subdivisions, and detached single-family dwellings.

Project Management and Subcontracting Authority

A B100 licensee may act as the prime contractor for a complete turnkey building project. In this capacity, the B100 contractor assumes overall contractual and managerial responsibility for the entire site, coordinating subcontractors, overseeing safety compliance, scheduling inspections, and delivering the finished structure.

3. Residential and Small Commercial Contractor (R100)

The R100 Residential and Small Commercial Building Contractor classification is tailored for home builders and light commercial builders. It includes comprehensive residential privileges combined with strictly defined commercial boundaries.

Permitted Residential Scope

Under R156-55a-301(3), the R100 classification permits the construction, alteration, repair, or demolition of:

Single-Family Dwellings: Detached single-family homes, townhouses constructed under the International Residential Code (IRC), and accessory dwelling units (ADUs).

Multi-Family Dwellings up to Four Units: Two-family dwellings (duplexes), three-family dwellings (triplexes), and four-family dwellings (four-plexes).

Incidental Residential Appurtenances: Detached garages, carports, private storage barns, swimming pools, retaining walls, and fences built incidental to residential structures.

Permitted Commercial Scope & Statutory Caps

The R100 contractor may also contract for small commercial structures, provided the building strictly satisfies two cumulative statutory constraints :

Story Limitation: The commercial structure must not exceed three stories in height above ground level.

Footprint Limitation: The ground floor footprint (or gross building footprint area) must not exceed 20,000 square feet .

Key Exam Distinction: If either the story limit or the footprint limit is exceeded, an R100 contractor cannot legally bid or contract for the work. A B100 license is required.

  • Summary of R100 Commercial Scope Boundaries ┌────────────────────────────────────────────────────────┐
  • │ R100 Commercial Scope Limits │
  • ├──────────────────────────┬─────────────────────────────┤
  • │ Criteria │ Statutory Ceiling │
  • ├──────────────────────────┼─────────────────────────────┤
  • │ Number of Above-Ground │ Maximum 3 Stories │
  • │ Stories │ (4th story requires B100) │
  • ├──────────────────────────┼─────────────────────────────┤
  • │ Ground Floor Footprint │ Maximum 20,000 sq. ft. │
  • │ Area │ (>20,000 sq ft requires B100│
  • ├──────────────────────────┼─────────────────────────────┤
  • │ Multi-Family Living │ Maximum 4 Living Units │
  • │ Units │ (5+ units requires B100) │
  • └──────────────────────────┴─────────────────────────────┘
  • 4. General Engineering Contractor (E100)

While the B100 and R100 classifications focus on vertical architectural construction, the E100 General Engineering Contractor classification governs horizontal civil infrastructure, heavy public works, and industrial site preparation.

Authorized Engineering Scope

Under Utah Code § 58-55-102(16) and R156-55a-301(1), the E100 scope encompasses fixed works requiring specialized civil engineering knowledge and equipment, including:

Transportation Infrastructure: Highways, freeways, county roads, airport runways, bridges, overpasses, railroad roadbeds, and tunnels.

Earthwork and Site Preparation: Bulk excavation, mass grading, trenching, soil compaction, slope stabilization, and retention basins.

Water Resource Infrastructure: Dams, aqueducts, municipal water treatment plants, culinary water distribution reservoirs, irrigation canals, and flood control levees.

Utility Pipeline Networks: Underground storm sewers, sanitary sewer collection mains, culinary water mains, high-pressure natural gas lines, and electrical utility duct banks.

Industrial Foundations: Heavy civil foundations for wind turbines, industrial kilns, overhead gantry cranes, and power plant substations.

Incidental Structures Authority

An E100 contractor is authorized to construct incidental structural buildings if they are an integral component of the engineering project. For example, when building a municipal culinary water line, an E100 contractor may construct a 1,500-square-foot masonry pump house designed to shelter high-service booster pumps. However, an E100 license does not authorize the contractor to build a standalone commercial retail store, office building, or residential dwelling.

5. Scope Comparison: B100 vs. R100 vs. E100

The following table provides a comprehensive statutory comparison across all three general contracting licenses:

Feature B100 (General Building) R100 (Residential / Small Commercial) E100 (General Engineering)

Core Focus Vertical commercial & residential buildings Residential homes & light commercial structures Horizontal civil engineering & heavy infrastructure

Building Height Limit Unlimited (any number of stories) Maximum 3 stories above grade (commercial) Incidental structures only

Commercial Footprint Unlimited (any square footage) Maximum 20,000 sq. ft. ground footprint Incidental structures only

Multi-Family Housing Unlimited (apartments, high-rise condos) Up to 4 units (duplex, triplex, four-plex) Non-residential (infrastructure only)

Civil Earthwork / Highways Incidental site grading & building pads Incidental residential grading only Primary authority (highways, dams, bridges)

Underground Municipal Utilities Building lateral connections only Residential service laterals only Primary authority (water/sewer trunk lines)

6. Specialty Classifications & The Self-Performance Prohibition

Utah recognizes dozens of Specialty Contractor classifications (S-Series) under Utah Administrative Code R156-55a-301. These specialty licenses cover focused trades such as concrete (S310), roofing (S260), masonry (S230), structural steel (S290), drywall (S270), and finish carpentry (S220).

What General Contractors May Self-Perform

A B100 or R100 general contractor possesses broad self-performance authority over general structural and finish trades. A general contractor may use their own direct W-2 employees to perform:

  • Concrete footings, foundation walls, and flatwork
  • Wood and light-gauge metal framing
  • Sheathing, weather-resistant barriers, and siding
  • Drywall hanging, taping, and texturing
  • Roofing, insulation, and acoustic ceiling installation
  • Finish carpentry, cabinet installation, and painting
  • The Mandatory Subcontracting Rule: Regulated MEP Trades

CRITICAL UTAH STATUTE: General contractors (B100 and R100) are strictly prohibited by Utah law from self-performing work in the regulated mechanical, electrical, and plumbing trades unless the contracting business entity holds the specific specialty contractor license, and the individuals doing the hands-on work hold individual trade licenses.

  • Trade Specialty Classification Required Individual Worker Licensure Required
  • Electrical S210 Electrical Contractor Licensed Master or Journeyman Electrician (Title 58-55)
  • Plumbing S212 / P200 Plumbing Contractor Licensed Master or Journeyman Plumber (Title 58-55)
  • HVAC / Mechanical S211 / S350 HVAC Contractor Certified RMGA / EPA technician & specialty qualifier
  • Legal Subcontracting Mandate

If a B100 or R100 general contractor does not hold an active S210, S212, or S211/S350 license, they must subcontract all electrical, plumbing, and HVAC work to licensed specialty contractors .

A general contractor whose in-house framing or labor crew runs electrical wiring, connects branch circuits, solders copper potable water pipes, or installs gas furnaces commits an unlawful act under Utah Code § 58-55-501 . This exposes the general contractor to administrative citations, mandatory civil fines ($1,000 to $2,000 per violation), and potential license suspension.

  • 7. Realistic Exam Scenario Analyses
  • Scenario 1: The Suburban Medical Office Building

Case: An R100 contractor is invited to bid as the prime general contractor on a new commercial pediatric clinic. The construction documents specify a two-story wood and steel framed building with a ground-floor footprint of 17,500 square feet and a total finished floor area of 35,000 square feet.

Analysis: The building has two stories (which is less than or equal to the 3-story statutory maximum) and a ground-floor footprint of 17,500 square feet (which is less than the 20,000-square-foot footprint ceiling). Even though the total combined floor area across both floors is 35,000 square feet, the project is fully within the legal scope of the R100 classification because the building does not exceed 3 stories and its ground-floor footprint does not exceed 20,000 square feet.

Scenario 2: The Multi-Family Apartment Complex

Case: An R100 residential builder seeks to construct an 8-unit luxury apartment building for a local real estate investor. The building is two stories in height and has an 8,000-square-foot footprint.

Analysis: Even though the physical structure is under 3 stories and under 20,000 square feet, this is a multi-family residential building containing eight living units. Under Utah Administrative Code R156-55a-301, the R100 classification is capped at multi-family dwellings of no more than four units (four-plex). Bidding or constructing an 8-unit apartment building requires an unrestricted B100 General Building Contractor license.

Scenario 3: In-House Plumbing Rough-In on a Custom Home

Case: A B100 general building contractor building a custom single-family home employs a highly skilled lead carpenter who previously worked in plumbing. To save $8,000 on the project budget, the contractor directs the carpenter to rough-in all drain, waste, and vent (DWV) piping and PEX water supply lines.

Analysis: This constitutes an explicit violation of Utah Code § 58-55-501. Holding a B100 license authorizes prime contracting over the building, but does not grant authority to self-perform plumbing work. Unless the general contracting entity holds an S212 plumbing contractor license and the carpenter holds an individual Utah journeyman plumber credential, the work must be subcontracted to a licensed Utah plumbing contractor.