Study guide
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
Utah Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Utah Property & Casualty Insurance Exam Overview
Utah Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
Risk, Hazards, Perils, and the Law of Large Numbers Insurable Interest, Indemnity, and Other Insurance Principles Insurance Contract Law and Elements Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
Section II Coverages E (Liability) and F (Medical Payments) Homeowners Conditions and Duties After Loss Common Homeowners Endorsements
8 National Portion: Personal Auto Policy - Liability & Injury
Personal Auto Policy Structure and Eligibility Part A Liability and Supplementary Payments Part B Medical Payments Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Utah P&C Insurance Regulation & Licensing
1.1 Utah Insurance Department 1.2 Utah Producer Licensing Requirements 1.3 License Renewal & Continuing Education 1.4 Producer Responsibilities & Duties
22 Chapter 2: Utah Property Insurance
2.1 Utah Homeowners Insurance 2.2 Utah Property Perils and Hazards 2.3 Utah Commercial Property Insurance
23 Chapter 3: Utah Casualty & Auto Insurance
3.1 Utah Auto Insurance Requirements 3.2 Utah Workers' Compensation
24 Chapter 4: Utah Ethics & Professional Conduct
4.1 Ethical Principles and Fiduciary Duty 4.2 Prohibited Practices in Utah 4.3 Consumer Protection and Regulatory Compliance
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
Key Takeaways Explain This Topic AI
The WC & EL policy (WC 00 00 00 C) has Part One (Workers Compensation, Coverage A) and Part Two (Employers Liability, Coverage B).
Part One has NO dollar limit - it pays whatever the statute in an Item 3.A state requires.
Part Two is true liability insurance with limits and covers gaps like third-party-over and consortium claims.
Part Two limits read accident-each-accident / disease-aggregate / disease-each-employee.
Monopolistic states (ND, OH, WA, WY) require Part One from the state fund; EL comes via a CGL stop-gap endorsement.
Last updated: June 2026
The WC & EL Policy Has Two Insuring Agreements
The standard policy is the NCCI Workers Compensation and Employers Liability Insurance Policy (WC 00 00 00 C) . It contains two distinct coverages bound into one contract:
- Part One — Workers Compensation Insurance (Coverage A)
- Part Two — Employers Liability Insurance (Coverage B)
The Information Page is the policy's declarations. Its Item 3.A lists the states where statutory coverage applies; Item 3.B shows Employers Liability limits; Item 3.C is Other States Insurance; Item 4 describes classifications and premium basis.
Part One: Pay Whatever the Statute Requires
Part One (Coverage A) is the insurer's promise to pay, on the employer's behalf, the benefits required by the workers' compensation law of any state listed in Item 3.A . Its defining feature: there is no dollar limit . Whatever the statute commands — including a multimillion-dollar catastrophic claim — the insurer pays.
Key Part One mechanics:
The insurer pays promptly as benefits become due; it does not wait for a lawsuit.
If the employer must pay a penalty for statutory violations (e.g., serious-and-willful misconduct surcharges), the insurer can recover that extra amount from the employer — the policy does not fund the employer's wrongdoing.
Part One has no aggregate limit because the statute, not the policy, defines the obligation.
Part Two: Employers Liability Fills the Tort Gaps
The exclusive-remedy bargain blocks most employee suits — but not all injury-related liability. Part Two (Coverage B) pays sums the employer becomes legally obligated to pay as damages for a covered work-related bodily injury when the comp statute does not bar the action. Unlike Part One, it is true liability insurance with limits .
Part Two responds to gaps such as:
Third-party-over actions — an injured worker sues a product manufacturer, who then sues the employer for contribution/indemnity.
Consequential bodily injury — injury to a spouse, child, or relative of the injured worker (e.g., loss of consortium).
Dual-capacity suits and care/loss-of-services claims.
Loss of consortium brought by a family member.
Part Two Limits: Reading the Three-Number Format
Employers Liability limits appear as three figures , e.g. $100,000 / $500,000 / $100,000 :
- Position Limit Applies to
- First $100,000 Bodily injury by accident — each accident
- Middle $500,000 Bodily injury by disease — policy aggregate
- Third $100,000 Bodily injury by disease — each employee
Note the trap: the middle number is the disease AGGREGATE , and the third is disease per employee — many candidates reverse them. The standard minimum limits are commonly $100,000/$500,000/$100,000.
Worked example: A disease claim by one employee is capped at the per-employee figure ($100,000). If three employees develop the same occupational disease at $100,000 each = $300,000, the $500,000 disease aggregate still has room. But a fourth, fifth, and sixth claim would eventually exhaust the $500,000 aggregate, after which Part Two pays nothing more for disease.
Monopolistic States
In monopolistic state fund states — North Dakota, Ohio, Washington, and Wyoming (mnemonic "ND, OH, WA, WY") — employers must buy Part One coverage from the state fund , not a private insurer. Because the state fund typically does not sell Part Two, employers obtain Employers Liability via a "stop gap" endorsement on their CGL policy. Remember: monopolistic states block private Part One sales, so the EL gap is filled by the CGL stop-gap endorsement.
Part One — Statutory, Unlimited, No Policy Limit
Part One (Workers Compensation Insurance) is the insurer's promise to pay promptly all benefits the workers compensation statute of a listed state requires — there is no dollar limit on Part One because the obligation is whatever the law says. The insurer also gains the right to handle and settle claims and the employer must reimburse the insurer for any payments the insurer makes that exceed what the law required at the employer's direction. Because Part One simply incorporates the statute, the same policy adjusts automatically when benefit levels change.
Part Two — Employers Liability Fills the Tort Gaps
Part Two (Employers Liability Insurance) is true liability coverage for employee injury situations the workers comp statute does not cover , where the employer can still be sued . It responds to: third-party-over actions (a product maker sued by the employee then sues the employer for contribution), consequential bodily injury to a family member, dual-capacity suits, loss of consortium , and injuries to employees not subject to the WC act. Part Two is what makes the policy a complete employer protection rather than just a statutory pass-through.
Reading the Part Two Three-Number Limits
Part Two limits appear as three numbers , e.g., $1,000,000 / $1,000,000 / $1,000,000 :
Bodily Injury by Accident — each accident (first number).
Bodily Injury by Disease — policy limit (aggregate cap for disease, the middle number).
Bodily Injury by Disease — each employee (third number).
A stem giving the three numbers and a disease claim affecting several employees tests whether you apply the per-employee and disease aggregate correctly — the disease aggregate caps total disease payouts for the term.
Monopolistic State Funds
In monopolistic states (historically North Dakota, Ohio, Washington, Wyoming , plus territories), employers must buy WC from the state fund , and private Part One is unavailable . Employers there obtain Employers Liability (stop-gap) coverage by endorsement on the CGL , because the state fund provides statutory benefits but not the Part-Two tort protection — a frequently tested wrinkle.