Study guide

1.3 Legal Descriptions and Surveys

Utah Real Estate Salesperson Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

How This Guide Maps to the Utah Salesperson Exam

2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

4 National Portion: Chapter 3: Property Value & Appraisal

The Concept of Value and Economic Principles The Appraisal Process and USPAP Basics Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

5 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

7 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

8 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

9 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

10 Chapter 1: Utah Division of Real Estate & Licensing

1.1 Utah Division of Real Estate (UDRE) 1.2 Utah License Requirements 1.3 License Maintenance and Renewal 1.4 Education, Research & Recovery Fund

11 Chapter 2: Agency & Disclosure

2.1 Utah Agency Relationships 2.2 Utah Agency Disclosure Requirements 2.3 Fair Housing in Utah

12 Chapter 3: Contracts & Property Disclosures

3.1 Utah Contract Requirements 3.2 Utah Property Disclosures 3.3 Utah Ownership, Title & Closing

13 Chapter 4: Trust Accounts & License Violations

4.1 Utah Trust Account Requirements 4.2 License Law Violations & Discipline 4.3 Advertising & Brokerage Operations

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

The three accepted legal description methods are metes-and-bounds, rectangular (government) survey, and lot-and-block (recorded plat).

A metes-and-bounds description must start and return to the same point of beginning (POB) to enclose the parcel.

In the rectangular survey system, a section is 1 mile square = 640 acres, and a township is 6 miles square = 36 sections.

One acre = 43,560 square feet; memorize this to solve area and fractional-section problems.

A datum and benchmark establish elevation for air lots and subsurface rights; a street address is NOT a legal description.

Last updated: June 2026

Three Methods of Legal Description

A legal description identifies a parcel precisely enough that a surveyor can locate its exact boundaries. A street address is NOT a legal description — that is a common exam trap. The three accepted methods are:

Method Best for Key feature

Metes and bounds Irregular parcels Distances (metes) and directions/boundaries (bounds) from a point of beginning

  • Rectangular (government) survey Large rural tracts Grid of meridians and base lines; sections and townships
  • Lot and block (recorded plat) Subdivisions References a recorded subdivision plat map
  • Metes and Bounds

This method describes a parcel by starting at a point of beginning (POB) , then tracing each boundary by direction and distance, and returning to the POB . If the description does not close back to the POB, the parcel is not properly enclosed. Monuments (a stake, a tree, a road) may mark corners. Metes are measured distances; bounds are the directions or boundary references.

The Rectangular (Government) Survey System

This system overlays a grid using principal meridians (running north-south) and base lines (running east-west). The grid creates townships , which are divided into sections . Memorize these conversions cold:

  • 1 township = 6 miles by 6 miles = 36 square miles = 36 sections
  • 1 section = 1 mile by 1 mile = 1 square mile = 640 acres
  • 1 acre = 43,560 square feet

Sections within a township are numbered 1–36, starting in the northeast corner , snaking west, then dropping a row and reversing (a boustrophedon pattern).

Fractional Sections

Descriptions read from the smallest fraction outward, e.g., "the NE¼ of the SW¼ of Section 10." To find the acreage, multiply the fractions and apply to 640 acres :

  • NE¼ of SW¼ = ¼ × ¼ = 1/16 of a section
  • 1/16 × 640 = 40 acres
  • Worked Example: Multi-Fraction Acreage and Price
  • Description: "The S½ of the NW¼ of the SE¼ of Section 14."

Step 1 — Multiply the fractions: ½ × ¼ × ¼ = 1/32.

Step 2 — Apply to 640 acres: 1/32 × 640 = 20 acres .

Step 3 — Convert to square feet (if asked): 20 × 43,560 = 871,200 sq ft .

Step 4 — Price problem: at $3,500 per acre , total price = 20 × $3,500 = $70,000 .

Speed tip: Multiply the denominators (2 × 4 × 4 = 32), then divide 640 by that product (640 ÷ 32 = 20). This is faster than chaining fractions and avoids arithmetic slips under time pressure.