Study guide
7.5 Outlining, the Straight-Razor Neck Shave and Head Shaving
Virginia Barber License Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Virginia Barber Exams, Licensing and Board Regulations
1.1 Virginia Barber License Pathway: Training Hours, Eligibility and the NIC Barber 1 Exams 1.2 Exam Registration, Retake Windows, License Fees, Renewal, Reinstatement and Endorsement 1.3 Shop Licenses, Responsible Management, License Display, Facility Standards and Inspections 1.4 Scope of Practice (Barber vs Master Barber vs Cosmetologist), Grounds for Discipline and Penalties 1.5 The NIC Barber 1 Practical Exam: Virginia Core Sections, Scoring Tasks and Kit
2 Chapter 2: Infection Control, Microbiology and Decontamination
2.1 Microbiology: Bacteria, Viruses, Fungi, Parasites and How Disease Spreads in the Barbershop 2.2 Decontamination Levels: Cleaning, Disinfection and Sterilization, and Virginia's 10-Minute Immersion Rule 2.3 Disinfecting Multiuse Implements, Clipper Blades and Linens Under 18VAC41-20-270 2.4 Single-Use Items, Prohibited Implements, Neck Protection and Waste Disposal
3 Chapter 3: Blood Exposure, Chemical Safety and Shop Safety
3.1 Blood Exposure Incidents, Standard Precautions, the Blood Spill Kit and Sharps Disposal 3.2 OSHA Hazard Communication, the 16-Section SDS and Virginia Chemical Storage Rules 3.3 Shop Safety: Slips, Electrical Hazards, Ergonomics, Ventilation and Fire Prevention
4 Chapter 4: Anatomy of the Head, Neck and Shoulders; Hair and Scalp Science
4.1 Bones, Muscles and Nerves of the Head, Face, Neck, Shoulders and Upper Back 4.2 Hair Structure: Follicle, Shaft Layers, Keratin, Side Bonds, Pigment and Growth Cycle 4.3 Hair and Scalp Analysis: Texture, Density, Porosity, Elasticity, Dry and Oily Scalp, and Dandruff 4.4 Contagious Skin and Scalp Disorders, Pseudofolliculitis Barbae and Service Contraindications 4.5 Hair Loss (Alopecia) and Hair Shaft Disorders: Types, Signs and Treatments
5 Chapter 5: Body Systems, Skin Science, Product Chemistry and Electricity
5.1 Body Systems for Barbers: Nervous, Circulatory, Lymphatic, Endocrine and Integumentary 5.2 Skin Histology: Epidermis, Dermis, Subcutaneous Tissue, Glands and Functions 5.3 Skin Lesions, Non-Contagious Skin Disorders, Pigmentation Changes and Skin Cancer Warning Signs 5.4 Basic Chemistry of Barbering Products: Matter, pH, Solutions, Emulsions, Surfactants and Labels 5.5 Electricity, Electrotherapy and Light Therapy: Currents, Modalities, Safety and Contraindications
6 Chapter 6: Barbering Tools, Implements and Maintenance
6.1 Shears, Thinning Shears and Straight Razors: Anatomy, Grips and Infection Control 6.2 Electric Clippers and Trimmers: Motors, Blade Sizes, Guards and Blade Alignment 6.3 Honing, Stropping, Clipper Maintenance and Virginia Clipper-Disinfection Rules
7 Chapter 7: Haircutting, Outlining and Head Shaving
7.1 Reference Points, Lines, Sections, Elevation and Guidelines 7.2 Clipper Techniques: Tapers, Fades, Guards, Lever Play and Clipper-over-Comb 7.3 Shear-over-Comb, Blunt Cutting, Layering, Cross-Checking and Texturizing 7.4 Face Shapes, Profiles, Necklines, Growth Patterns and the Haircut Consultation 7.5 Outlining, the Straight-Razor Neck Shave and Head Shaving
8 Chapter 8: Shampoo and Scalp Care, Hair Styling and Hair Enhancements
8.1 Draping, Shampooing, Conditioning and Scalp Treatments 8.2 Hair Styling: Wet Styling, Blow-Dry Styling, Thermal Styling and Natural Hair (Braids, Twists and Locks) 8.3 Hair Enhancements: Hair Replacement Systems, Wigs and Hairpieces
9 Chapter 9: Shaving, Facial Hair Design and Facials
9.1 Shave Preparation: Consultation, Contraindications, Draping, Steam Towels, Lather and Skin Stretching 9.2 The 14 Shaving Areas and the Four Razor Strokes 9.3 Post-Shave Care, Virginia Styptic Rules and Pseudofolliculitis Barbae 9.4 Beard and Mustache Design and Scalp Manipulations 9.5 Facial Treatments and Facial Massage: Skin Analysis, Cleansing, Steam Towels, Massage and Masks
10 Chapter 10: Barbershop Business, Ethics and Risk Management (Supplementary)
10.1 Business Structures and Virginia Shop Licensing 10.2 Booth Rental vs. Employee, Self-Employment Tax, Tip Reporting and Break-Even Math 10.3 Professional Ethics, Client Communication, Patch Tests and Client Records 10.4 Insurance, Virginia Workers' Compensation and ADA Accessibility
7.5 Outlining, the Straight-Razor Neck Shave and Head Shaving
Key Takeaways Explain This Topic AI
Outlining (edging or lining) defines the perimeter of a haircut around the ears, sideburns, front hairline and nape with a trimmer or straight razor after the cut is blended.
On the NIC Barber 1 practical, the candidate must establish an outline around the ears, keep the sideburns uniform in length, and shave both sides of the neck with a straight razor, including a reverse backhand stroke.
For a right-handed barber, the reverse backhand stroke shaves the left side of the neck from behind the ear downward.
A straight-razor neck or head shave follows the grain on the first pass, keeps the stretching hand dry and behind the stroke, and works around moles, raised lesions and inflamed bumps.
Head shaving starts by reducing length with clippers, then softening with a warm towel and lather, then shaving with the grain section by section before a cool finish and moisturizer.
Last updated: October 2026
Why Finishing Work Is Tested
The NIC Barber 1 theory outline lists haircutting as shaping, outlining and neck shave , and names preparation, procedures and safety for head shaving separately. On the practical, examiners score whether you establish an outline around the ears , whether the sideburns are uniform in length , and whether you shave both sides of the neck with a straight razor, including a reverse backhand stroke, using all proper neck-shave procedures (Section 1.5).
Outlining (Edging or Lining)
Outlining defines the haircut's perimeter after the bulk is cut and blended. The tools are usually a trimmer (outliner) and comb , followed by a straight razor for the closest finish.
Area Technique Common error
Around the ears Fold the ear forward or down with the free hand to protect it. Follow the natural arc of the hairline with the trimmer's corner teeth, or with the razor point. Keep the arc slightly away from the ear so it does not look scooped Cutting the arc too high, which leaves a white gap that grows out badly
Sideburns Comb down and mark the length agreed in the consultation; match the other side by checking in the mirror and with fingers placed level Uneven sideburns, which the NIC practical scores directly
Front hairline Follow the natural line; a sharp "line-up" only if the client requests it Pushing the line back into the hairline, which looks unnatural and makes regrowth obvious
Nape For the NIC practical, a tapered nape with no blocked line . In the shop, follow the agreed design: tapered, rounded or squared A hard line across a nape that should taper
Tip
Before outlining, check that the trimmer's cutting blade sits behind the stationary blade (Section 6.2). A misaligned trimmer can nick the thin skin behind the ear.
The Straight-Razor Neck Shave
Shaving the hairline and sides of the neck gives a clean finish that lasts longer than trimmer work alone. The haircut drape stays in place (neck strip and cape). Hair clippings are cleared first, using a clean towel or a dryer on a cool setting, because Virginia prohibits neck dusters.
Procedure (Right-Handed Barber)
Prepare. Put a new blade in a changeable-blade razor, or use a cleaned and disinfected razor. Sanitize your hands. Brace your hand when working near the eyes or mouth.
Lather the sideburn areas, around the ears and the sides and back of the neck. Use non-aerosol shaving cream on the NIC practical.
Right side. Shave the right sideburn and around the right ear with the freehand stroke, stretching the skin behind the razor with the dry fingers of the free hand. Then shave down the right side of the neck.
Left side. Shave the left sideburn and around the left ear with the backhand stroke. Then use the reverse backhand stroke from behind the left ear down the left side of the neck . This is the stroke the NIC practical requires you to demonstrate.
Back of the neck. Shave the nape outline with the grain.
Finish. Wipe away lather with a clean towel. Apply a toner or antiseptic with clean cotton, and finish with talc or moisturizer on a single-use applicator. Discard the blade in a sharps container, and put used linens and implements in their labeled containers.
Note
A left-handed barber reverses the sides: the reverse backhand is used on the client's right side, from behind the ear down the neck.
Do not neck-shave over raised moles, pustules, open cuts, active razor bumps (pseudofolliculitis barbae), keloids or rashes. Outline with a trimmer instead, or skip the area and explain why.
Head Shaving
A clean-shaven head is a popular choice, especially for clients with advanced pattern hair loss.
1. Consultation and Scalp Check
Ask whether the client has shaved their head before, how often they shave, and whether they have had nicks or bumps.
Run your fingertips over the entire scalp to find ridges, bumps, scars and the occipital and parietal contours .
Look for moles, skin tags, psoriasis, cuts, sunburn or signs of infection . Contagious conditions mean no service. Raised lesions must be avoided.
Map the growth directions . The crown whorl and the nape change grain.
2. Preparation
Drape for a shave. Protect the client's eyes from clippings and lather.
Reduce the length with clippers using the closest guard or blade (or a foil shaver), clearing all longer hair. Never attempt to razor-shave long hair.
Apply a warm, moist towel (test it on your inner wrist first) to soften the stubble and relax the scalp.
Lather a section at a time so the lather does not dry.
3. Shaving
Work section by section : the top front to the crown, then the sides, then the back and nape.
Hold the razor at roughly a 30-degree angle and stretch the skin taut behind the stroke.
First pass: with the grain . Follow the whorl at the crown, where direction changes in a circle.
Optional second pass across the grain on clients without sensitivity. Avoid against-the-grain passes on clients prone to bumps.
Take extra care over the occipital bone , the mastoid process behind the ear and around the ears, where the skin curves sharply.
4. Aftercare
Rinse or wipe away the lather, apply a cool towel , then a soothing, alcohol-free moisturizer. Advise the client that newly shaved scalp skin burns easily and recommend a broad-spectrum sunscreen or a hat outdoors. Clients who shave at home between visits should use a sharp blade, shave with the grain and moisturize daily.
- Head-shave mistake Consequence Prevention
- Shaving without first reducing length with clippers Pulling, a dull blade, cuts Clipper first, then razor
Dry fingers not used for stretching Skin bunches in front of the blade and gets nicked Keep the free hand dry and behind the stroke
Shaving against the grain first Irritation, ingrown hairs With the grain first; across the grain only if needed
Ignoring raised lesions Bleeding, infection, a blood exposure incident Map lesions during the consultation and shave around them