Study guide
9.2 The 14 Shaving Areas and the Four Razor Strokes
Virginia Barber License Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Virginia Barber Exams, Licensing and Board Regulations
1.1 Virginia Barber License Pathway: Training Hours, Eligibility and the NIC Barber 1 Exams 1.2 Exam Registration, Retake Windows, License Fees, Renewal, Reinstatement and Endorsement 1.3 Shop Licenses, Responsible Management, License Display, Facility Standards and Inspections 1.4 Scope of Practice (Barber vs Master Barber vs Cosmetologist), Grounds for Discipline and Penalties 1.5 The NIC Barber 1 Practical Exam: Virginia Core Sections, Scoring Tasks and Kit
2 Chapter 2: Infection Control, Microbiology and Decontamination
2.1 Microbiology: Bacteria, Viruses, Fungi, Parasites and How Disease Spreads in the Barbershop 2.2 Decontamination Levels: Cleaning, Disinfection and Sterilization, and Virginia's 10-Minute Immersion Rule 2.3 Disinfecting Multiuse Implements, Clipper Blades and Linens Under 18VAC41-20-270 2.4 Single-Use Items, Prohibited Implements, Neck Protection and Waste Disposal
3 Chapter 3: Blood Exposure, Chemical Safety and Shop Safety
3.1 Blood Exposure Incidents, Standard Precautions, the Blood Spill Kit and Sharps Disposal 3.2 OSHA Hazard Communication, the 16-Section SDS and Virginia Chemical Storage Rules 3.3 Shop Safety: Slips, Electrical Hazards, Ergonomics, Ventilation and Fire Prevention
4 Chapter 4: Anatomy of the Head, Neck and Shoulders; Hair and Scalp Science
4.1 Bones, Muscles and Nerves of the Head, Face, Neck, Shoulders and Upper Back 4.2 Hair Structure: Follicle, Shaft Layers, Keratin, Side Bonds, Pigment and Growth Cycle 4.3 Hair and Scalp Analysis: Texture, Density, Porosity, Elasticity, Dry and Oily Scalp, and Dandruff 4.4 Contagious Skin and Scalp Disorders, Pseudofolliculitis Barbae and Service Contraindications 4.5 Hair Loss (Alopecia) and Hair Shaft Disorders: Types, Signs and Treatments
5 Chapter 5: Body Systems, Skin Science, Product Chemistry and Electricity
5.1 Body Systems for Barbers: Nervous, Circulatory, Lymphatic, Endocrine and Integumentary 5.2 Skin Histology: Epidermis, Dermis, Subcutaneous Tissue, Glands and Functions 5.3 Skin Lesions, Non-Contagious Skin Disorders, Pigmentation Changes and Skin Cancer Warning Signs 5.4 Basic Chemistry of Barbering Products: Matter, pH, Solutions, Emulsions, Surfactants and Labels 5.5 Electricity, Electrotherapy and Light Therapy: Currents, Modalities, Safety and Contraindications
6 Chapter 6: Barbering Tools, Implements and Maintenance
6.1 Shears, Thinning Shears and Straight Razors: Anatomy, Grips and Infection Control 6.2 Electric Clippers and Trimmers: Motors, Blade Sizes, Guards and Blade Alignment 6.3 Honing, Stropping, Clipper Maintenance and Virginia Clipper-Disinfection Rules
7 Chapter 7: Haircutting, Outlining and Head Shaving
7.1 Reference Points, Lines, Sections, Elevation and Guidelines 7.2 Clipper Techniques: Tapers, Fades, Guards, Lever Play and Clipper-over-Comb 7.3 Shear-over-Comb, Blunt Cutting, Layering, Cross-Checking and Texturizing 7.4 Face Shapes, Profiles, Necklines, Growth Patterns and the Haircut Consultation 7.5 Outlining, the Straight-Razor Neck Shave and Head Shaving
8 Chapter 8: Shampoo and Scalp Care, Hair Styling and Hair Enhancements
8.1 Draping, Shampooing, Conditioning and Scalp Treatments 8.2 Hair Styling: Wet Styling, Blow-Dry Styling, Thermal Styling and Natural Hair (Braids, Twists and Locks) 8.3 Hair Enhancements: Hair Replacement Systems, Wigs and Hairpieces
9 Chapter 9: Shaving, Facial Hair Design and Facials
9.1 Shave Preparation: Consultation, Contraindications, Draping, Steam Towels, Lather and Skin Stretching 9.2 The 14 Shaving Areas and the Four Razor Strokes 9.3 Post-Shave Care, Virginia Styptic Rules and Pseudofolliculitis Barbae 9.4 Beard and Mustache Design and Scalp Manipulations 9.5 Facial Treatments and Facial Massage: Skin Analysis, Cleansing, Steam Towels, Massage and Masks
10 Chapter 10: Barbershop Business, Ethics and Risk Management (Supplementary)
10.1 Business Structures and Virginia Shop Licensing 10.2 Booth Rental vs. Employee, Self-Employment Tax, Tip Reporting and Break-Even Math 10.3 Professional Ethics, Client Communication, Patch Tests and Client Records 10.4 Insurance, Virginia Workers' Compensation and ADA Accessibility
9.2 The 14 Shaving Areas and the Four Razor Strokes
Key Takeaways Explain This Topic AI
The straight razor must maintain a precise operational angle of approximately 30 degrees to the skin; exceeding 30 degrees causes the blade to bite and cut, while angles under 30 degrees scrape and pull hair without cutting.
Straight-razor shaving uses four strokes: freehand, backhand, reverse freehand (an upward stroke) and reverse backhand (used on the side of the neck behind the ear).
The standard professional facial shave divides the face and neck into 14 numbered anatomical zones executed in a sequential, systematic routine to maintain speed, rhythm, and safety.
Area 14 is under the lower lip and is shaved upward with the reverse freehand stroke; the NIC Barber 1 practical calls for freehand strokes in areas 1, 3 and 11, a backhand stroke in area 2, and reverse freehand strokes in areas 13 and 14.
A second-time-over shave follows the first pass, usually on dampened skin, working with or across the grain; a close shave against the grain is seldom done because it causes irritation and ingrown hairs.
Last updated: October 2026
The execution of a traditional straight razor shave is an exercise in applied biomechanics. A barber must balance the balance, weight, and razor-sharp edge of a hollow-ground steel blade against the complex three-dimensional contours, curved skeletal landmarks, and varying skin densities of the human face and neck. To achieve complete hair removal without scratching, scraping, or lacerating the client, the barbering profession established a rigorous, standardized system: the Four Standard Razor Strokes and the Fourteen Shaving Areas of the Face .
The Biomechanics of the Straight Razor and the 30-Degree Angle
A straight razor does not cut hair via crushing pressure (like shears or clippers); it operates as an ultra-fine microscopic wedge that shears the hair shaft along an acute angular plane.
Loading diagram...
The Golden 30-Degree Rule
During every razor stroke across all facial zones, the angle formed between the flat face of the razor blade and the surface of the skin must remain at approximately 30 degrees .
The Error of a Steep Angle (>30°): When the razor spine is elevated too far away from the skin, the cutting edge approaches a 45-degree or perpendicular angle. In this position, the blade ceases to glide and instead "bites" directly into the epidermal ridges, producing immediate micro-lacerations, deep gouges, and severe razor burn.
The Error of a Flat Angle (<30°): When the razor spine is dropped too close or flat against the face, the cutting edge lifts slightly off the skin plane while the rounded spine makes contact. The blade cannot slice through the hair shaft; instead, it skates over the cuticle, catching and yanking the hair follicle root while scraping off stratum corneum cells, causing intense burning pain and folliculitis.
The Slicing Glide vs. Chopping Motion
A straight razor must never be pushed forward like an axe in a perpendicular, chopping motion. Doing so generates high resistance and hair tugging. Instead, the barber executes a smooth, continuous, diagonal slicing glide . The blade is drawn forward while simultaneously sliding slightly along its length (leading with either the point or heel depending on the stroke), creating a microscopic scythe-like slicing motion that severs coarse terminal hair with zero drag.
The Four Standard Razor Strokes
To shave all 14 zones of the face without contorting the client's neck into uncomfortable positions or obstructing the barber's visual sightlines, the barber utilizes four distinct arm, wrist, and blade configurations.
Loading diagram...
1. The Freehand Stroke
Mechanics of Hold: The razor is held with the shank resting across the index, middle, and ring fingers, with the pinky curved gracefully over the tang. The thumb rests firmly against the shank near the pivot pin. The palm of the hand faces downward or toward the client.
Stroke Dynamics: The razor glides smoothly toward the barber . The stroke is initiated from the wrist and forearm, leading slightly with the point (toe) of the blade.
Areas Used: 1, 3, 4, 8, 11 and 12 (area 12 may also be shaved backhand). On the NIC practical: areas 1, 3 and 11 .
2. The Backhand Stroke
Mechanics of Hold: The razor is held with the back of the hand facing toward the barber or client. The forearm is held horizontally with the elbow elevated comfortably outward. The thumb rests against the shank, while the fingers support the handle and spine.
Stroke Dynamics: The razor glides smoothly away from the barber (or downward with an elevated elbow). The movement is driven primarily by wrist flexion and forearm control.
Areas Used: 2, 6, 7 and 9 (and area 12 as an alternative). On the NIC practical: area 2 .
3. The Reverse Freehand Stroke
Mechanics of Hold: The razor is gripped with the hand turned palm upward. The thumb rests firmly against the flat of the shank, while the index and middle fingers support the opposite side of the shank. The pinky finger rests against the tang.
Stroke Dynamics: The razor glides upward and toward the barber . This stroke requires a flexible, supple wrist to maneuver the blade upward against the grain or along upward-angled neck contours.
Areas Used: 5, 13 and 14, and area 10 in many textbooks (some teach area 10 with the reverse backhand). On the NIC practical: areas 13 and 14 .
4. The Reverse Backhand Stroke
Mechanics of Hold: The barber turns the wrist so that the back of the hand is directed downward and away. The elbow is kept relaxed while the blade edge is oriented to slice along awkward angles.
Stroke Dynamics: The razor glides downward and away from the barber (or upward and across). It is particularly effective along the difficult lateral angles of the left cervical neck and behind the left earlobe.
Areas Used: The left side of the neck behind the ear for a right-handed barber (area 10 in some textbooks), especially during a neck shave. The NIC Barber 1 practical requires a reverse backhand stroke when shaving the sides of the neck.
Master Breakdown: The 14 Shaving Areas of the Face
The standard facial shave divides the bearded area into 14 numbered areas. For a right-handed barber, the sequence covers the right side of the face and neck (areas 1–5), then the left side (areas 6–10), then the chin, under the chin, the center of the neck and under the lower lip (areas 11–14). A left-handed barber mirrors the sides. Adhering strictly to this numbering system guarantees methodical coverage, optimal client positioning, and efficient muscle memory.
- Area Stroke Direction Right-handed barber: area of the face
- 1 Freehand Down From the right sideburn toward the jawbone and the angle of the mouth
- 2 Backhand Down From the right angle of the mouth toward the point of the chin
- 3 Freehand Down From the center of the upper lip toward the right corner of the mouth
- 4 Freehand Down From the right jawbone down to where the grain changes on the neck
- 5 Reverse freehand Up Right side of the neck, up to the grain change
- 6 Backhand Down From the center of the upper lip toward the left corner of the mouth
- 7 Backhand Down From the left sideburn toward the jawbone and the angle of the mouth
- 8 Freehand Down From the left angle of the mouth toward the point of the chin
- 9 Backhand Down From the left jawbone down to the grain change
- 10 Reverse freehand (some texts: reverse backhand) Up Left side of the neck, up to the grain change
- 11 Freehand Across Across the chin
- 12 Freehand or backhand Down Under the chin, down to the grain change
- 13 Reverse freehand Up Center of the neck, up to the grain change
- 14 Reverse freehand Up Under the lower lip
Note
This chart follows the BCcampus open textbook Barbering Techniques for Hairstylists (CC BY 4.0). Its stroke assignments match the commonly taught Milady sequence: freehand in areas 1, 3, 4, 8, 11 and 12; backhand in 2, 6, 7 and 9; reverse freehand in 5, 10, 13 and 14. Some textbooks number the left-side areas differently, so learn the chart your school uses. On the NIC Barber 1 practical , the examiner calls for freehand strokes in areas 1, 3 and 11, a backhand stroke in area 2, and reverse freehand strokes in areas 13 and 14 . Those six areas are the same in every common chart. A left-handed barber mirrors the left and right sides.
Navigating Challenging Anatomical Contours
Certain facial landmarks present extreme hazards where even a minor technical lapse can cause deep lacerations.
1. The Center of the Neck and the Thyroid Cartilage (Adam's Apple)
The thyroid cartilage forms a sharp, protruding angular peak in the center of the anterior neck. The skin resting directly over this prominence is thin, tightly stretched over cartilage, and highly susceptible to slicing.
The Lateral Displacement Technique: Never shave directly over the crest of the Adam's apple while the skin is centered. The barber instructs the client to swallow and relax, or uses dry non-dominant fingers to pull the skin laterally (sideways) onto the flat, muscular surface of the sternocleidomastoid muscle beside the cartilage. The barber then executes the upward Reverse Freehand stroke across the flattened, cushioned skin. Once shaved, the tension is released, allowing the skin to return smoothly to the center.
2. The Mental Cleft and Lip Corners (Oral Commissures)
The Chin Cleft: A deep vertical furrow or dimple in the chin cannot be shaved in a single broad pass. The barber must stretch the skin laterally from both sides using thumb and forefinger to flatten the depression, or use the toe (point) of the razor in short, delicate diagonal strokes.
Oral Commissures (Corners of the Mouth): The skin at the corners of the mouth is delicate and mobile. The client should be instructed to slightly puff out the lips or press their lips gently together to provide internal muscular firmness, while the barber stretches the corner outward toward the cheek before stroking.
The Second-Time-Over Shave vs. The Close Shave
Professional barbering distinguishes between a standard once-over shave, a second-time-over shave, and an ultra-close shave.
Loading diagram...
1. The Once-Over Shave
A once-over shave consists of completing the standard 14 shaving areas once, strictly following the grain of the beard with few or no repeat strokes. It is the service of choice for clients with sensitive skin, light beard growth, or those prone to ingrown hairs.
2. The Second-Time-Over Shave
When a client desires an exceptionally smooth finish and possesses dense, coarse hair:
The face is sponged with a warm, damp towel to remove residual debris and re-soften stubble.
The skin is dampened with warm water; many textbooks do this second pass without fresh lather .
The barber re-shaves using light, short strokes with the grain or across the grain (perpendicular to the direction of growth) to remove remaining stubble.
3. The Close Shave (Why Shaving Against the Grain Is Discouraged)
A "close shave" historically referred to shaving against the grain during the second pass. Shaving directly against the grain is discouraged:
Shaving against the grain lifts the hair shaft abruptly out of the follicle before cutting it, causing the severed, sharp, beveled hair tip to snap back and retract beneath the surface of the epidermal ostium.
This subsurface retraction is the primary clinical trigger for Pseudofolliculitis barbae (ingrown razor bumps) and causes micro-abrasions that result in post-shave burning and infection.