Study guide

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids

Virginia CDL Hazardous Materials Endorsement Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Intent of the Regulations and Transportation Roles

1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What

2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information

2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement

3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings

3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards

4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard

4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules

5 Chapter 5: Hazard Classes and the Hazardous Materials Table

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material

6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards

6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding

7 Chapter 7: Loading, Securement, and Segregation

7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs

8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations

8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding

9 Chapter 9: Driving, Parking, Attendance, and Routing Rules

9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents

10 Chapter 10: Security Awareness and Risk Management

10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response

11 Chapter 11: Emergency Response and Scene Management

11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses

12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting

12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention

13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening

13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals

14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions

14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids

Key Takeaways Explain This Topic AI

Class 1 explosives are divided into six divisions, from Division 1.1 mass explosion hazards through Division 1.6 extremely insensitive articles.

Division 2.1 is flammable gas, Division 2.2 is non-flammable non-toxic gas, and Division 2.3 is gas toxic by inhalation such as chlorine or phosgene.

A flammable liquid has a flash point of not more than 140 degrees Fahrenheit; a combustible liquid has a flash point at or above 140 and below 200 degrees Fahrenheit.

Division 4.1 is flammable solid, Division 4.2 is spontaneously combustible, and Division 4.3 is dangerous when wet.

Anhydrous ammonia is regulated domestically as Division 2.2 with an inhalation-hazard marking rather than as a Division 2.3 toxic gas.

Last updated: September 2026

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids

Commercial motor vehicle drivers transporting hazardous materials operate under a rigorous federal safety mandate codified in Title 49 of the Code of Federal Regulations (49 CFR) Parts 100–185 . Every commercial shipment moving over public highways must be properly classified, packaged, marked, labeled, and placarded according to its distinct chemical and physical hazards.

For professional drivers seeking the Virginia Commercial Driver's License (CDL) Hazardous Materials Endorsement (HME), mastering the Nine DOT Hazard Classes is both a critical safety competency and a primary testing domain on the Virginia Department of Motor Vehicles (DMV) knowledge examination. The Hazardous Materials Regulations (HMR) divide these classes into specific divisions to pinpoint exact physical properties, reaction speeds, and danger thresholds.

Class 1: Explosives (49 CFR § 173.50)

Class 1 encompasses any substance, compound, or mechanical mixture whose primary purpose is to function by explosion (an instantaneous release of gas, heat, and pressure) or which by chemical reaction can produce explosive effects. Class 1 materials are categorized into six numbered divisions based on hazard behavior, accompanied by compatibility group letters (A through S) to govern safe cargo segregation.

Division 1.1 — Mass Explosion Hazard: Materials that present a mass detonation risk affecting virtually the entire load instantaneously. Examples include dynamite, trinitrotoluene (TNT), nitroglycerin, blasting caps in commercial quantities, and black powder.

Division 1.2 — Projection Hazard: Materials presenting a severe projection hazard (fragments, shrapnel, or casing debris) but not a mass explosion hazard. Examples include military flares, fragmentation grenades, and solid propellant rocket motors.

Division 1.3 — Fire Hazard with Minor Blast or Projection Hazard: Substances that exhibit a radiant fire hazard coupled with minor blast or projection effects, but without mass detonation risk. Examples include display fireworks, liquid rocket propellants, smokeless powder, and aerial distress flares.

Division 1.4 — Minor Explosion Hazard: Explosive devices presenting only a minor hazard in the event of ignition during transport, with effects largely confined to the package. Packaged small arms ammunition (cartridges, small arms), consumer fireworks (1.4G), and safety fuses belong to this division.

Division 1.5 — Very Insensitive Substances with Mass Explosion Potential: Blasting agents consisting of substances with a mass explosion hazard that are so insensitive under normal transport conditions that the probability of accidental initiation or transition from burning to detonation is exceptionally remote. The most common commercial example is ANFO (Ammonium Nitrate-Fuel Oil) blasting agent.

Division 1.6 — Extremely Insensitive Articles: Articles containing only extremely insensitive detonating substances that demonstrate a negligible probability of accidental initiation, without a mass explosion hazard.

Explosive Compatibility Groups

Explosives carry a compatibility group capital letter (e.g., 1.1D, 1.4S). There are 13 compatibility groups ( A, B, C, D, E, F, G, H, J, K, L, N, S ). Compatibility groups prevent loading sensitive initiating explosives (such as primary detonators in Group B) alongside bulk secondary high explosives (Group D), preventing sympathetic detonation during highway transit.

Class 2: Gases (49 CFR § 173.115)

A gas is any material that has a vapor pressure exceeding 43.5 psia (300 kPa) at 122°F (50°C), or is completely gaseous at 68°F (20°C) at a standard atmospheric pressure of 14.7 psia (101.3 kPa). Class 2 is partitioned into three distinct divisions:

Division 2.1 — Flammable Gas: Any compressed or liquefied gas that is ignitable at standard atmospheric pressure (14.7 psia) when in a mixture of 13 percent or less by volume with air, or has a flammable range with air of at least 12 percent regardless of the lower explosive limit. Familiar commodities include propane, butane, acetylene, hydrogen, methane, and liquefied petroleum gas (LPG) .

Division 2.2 — Non-Flammable, Non-Toxic Compressed Gas: Gases transported under a pressure not less than 40.6 psia (280 kPa) at 68°F (20°C), including compressed gases, liquefied gases, pressurized cryogenic liquids, and asphyxiating or oxidizing gases. Examples include compressed nitrogen, helium, argon, carbon dioxide, and compressed breathing air .

Division 2.3 — Gas Toxic by Inhalation (Poison Gas): Gases known to be toxic or lethal to humans through inhalation, or demonstrating an inhalation toxicity ( L C 50 LC_{50} L C 50 ​ ) of 5,000 parts per million (ppm) or less when tested on laboratory animals. Division 2.3 gases represent catastrophic life threats. Examples include chlorine, phosgene, anhydrous hydrogen chloride, sulfur dioxide, and hydrogen cyanide . (Note: Anhydrous ammonia is regulated domestically as a Division 2.2 non-flammable gas with inhalation hazard markings, but transitions to Division 2.3 toxic gas in international marine and air shipments).

Class 3: Flammable and Combustible Liquids (49 CFR § 173.120)

Class 3 regulations govern liquid chemicals based on their flash point —the lowest liquid temperature at which vapor is emitted in sufficient concentration near the surface to form an ignitable mixture with air.

Flammable Liquid: Any liquid having a flash point of not more than 140°F (60°C) , or any material in a liquid phase with a flash point at or above 100°F (37.8°C) that is intentionally heated and offered for transportation at or above its flash point. Common examples: gasoline (flash point approximately -45°F), ethanol, acetone, toluene, and methyl ethyl ketone (MEK) .

Combustible Liquid: Any liquid that does not meet the definition of any other hazard class and has a flash point at or above 140°F (60°C) and below 200°F (93°C) . Examples: diesel fuel, No. 2 fuel oil, kerosene, and mineral spirits .

Note

Domestic Flammable Reclassification Exception: Under 49 CFR § 173.150(f), a flammable liquid with a flash point at or above 100°F (38°C) may be reclassified and transported as a combustible liquid for domestic highway transport in non-bulk packagings, significantly reducing regulatory burdens.

Class 4: Flammable Solids, Spontaneously Combustible, and Water-Reactive (49 CFR § 173.124)

Class 4 encompasses solid materials (other than Class 1 explosives) that readily ignite, self-heat, or react violently with water:

Division 4.1 — Flammable Solid: Readily combustible solids that cause or contribute to fire through friction, retained heat, or self-reactive chemical decomposition. Includes wetted explosives (desensitized nitrocellulose), self-reactive substances, and solids like safety matches, sulfur, and camphor .

Division 4.2 — Spontaneously Combustible Material: Includes pyrophoric materials (liquids or solids that ignite within 5 minutes of contact with air without an external ignition source) and self-heating materials that generate internal heat when in contact with air. Examples: white or yellow phosphorus, activated carbon (charcoal), and oily rags/linseed oil residue .

Division 4.3 — Dangerous When Wet: Substances that, by interaction with water, are liable to become spontaneously flammable or give off flammable or toxic gases at a rate greater than 1 liter per kilogram per hour. Examples: metallic sodium, potassium, calcium carbide (which generates acetylene gas upon water contact), and magnesium powder .