Study guide

5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9

Virginia CDL Hazardous Materials Endorsement Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Intent of the Regulations and Transportation Roles

1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What

2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information

2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement

3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings

3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards

4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard

4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules

5 Chapter 5: Hazard Classes and the Hazardous Materials Table

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material

6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards

6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding

7 Chapter 7: Loading, Securement, and Segregation

7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs

8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations

8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding

9 Chapter 9: Driving, Parking, Attendance, and Routing Rules

9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents

10 Chapter 10: Security Awareness and Risk Management

10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response

11 Chapter 11: Emergency Response and Scene Management

11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses

12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting

12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention

13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening

13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals

14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions

14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route

5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9

Key Takeaways Explain This Topic AI

Division 5.1 oxidizers yield oxygen and accelerate the combustion of other materials; Division 5.2 organic peroxides are thermally unstable and can decompose explosively.

Division 6.1 covers toxic materials other than gases, with inhalation hazard zones A through D; Division 6.2 covers infectious substances.

Radioactive packages carry a White I, Yellow II, or Yellow III label, and only Yellow III triggers vehicle placarding.

Class 8 corrosives destroy skin tissue or corrode steel or aluminum faster than 6.25 mm per year.

Class 9 covers materials that present a transportation hazard but fit no other class, including lithium batteries, elevated temperature materials, and marine pollutants.

Last updated: September 2026

  • 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9
  • Class 5: Oxidizers and Organic Peroxides (49 CFR §§ 173.127 & 173.128)

Class 5 materials do not necessarily burn independently, but they dramatically accelerate and sustain violent combustion in other materials:

Division 5.1 — Oxidizer: A substance that yields oxygen readily to stimulate or enhance the combustion of organic matter and other fuels. Examples include ammonium nitrate, calcium hypochlorite (swimming pool shock), concentrated hydrogen peroxide (above 20%), and potassium permanganate .

Division 5.2 — Organic Peroxide: Chemically unstable organic compounds containing the bivalent − O − O − -O-O- − O − O − molecular peroxide structure. These materials are derivative forms of hydrogen peroxide where one or both hydrogen atoms have been replaced by organic radicals. They are thermally sensitive, burn violently, release oxygen internally, and can decompose explosively when subjected to friction, impact, or temperature elevations. Common examples: benzoyl peroxide, peracetic acid, and methyl ethyl ketone peroxide (MEKP) . Division 5.2 compounds are classified into Types A through G based on stability.

Class 6: Toxic (Poison) and Infectious Substances (49 CFR §§ 173.132 & 173.134)

Division 6.1 — Toxic Materials (Poisons): Materials, other than gases, that present severe health hazards to humans via oral toxicity (swallowing), dermal toxicity (skin absorption), or vapor/dust inhalation. Commodities include potassium cyanide, arsenic compounds, nicotine, sodium fluoroacetate, and organophosphate pesticides .

Inhalation Hazard Zones: Division 6.1 liquids and solids producing toxic vapors are assigned to Hazard Zones A, B, C, or D based on lethal concentration ( L C 50 LC_{50} L C 50 ​ ). Zone A is the most lethal ( L C 50 ≤ 200 ppm LC_{50} \le 200\text{ ppm} L C 50 ​ ≤ 200 ppm ), triggering stringent containment and mandatory placarding at any quantity.

Division 6.2 — Infectious Substances: Materials known or reasonably expected to contain viable pathogens—microorganisms including bacteria, viruses, rickettsiae, parasites, or fungi—that cause disease in humans or animals. Examples: anthrax cultures, Ebola virus, clinical medical waste, and regulated diagnostic specimens .

Class 7: Radioactive Materials (49 CFR § 173.403)

Class 7 radioactive materials emit ionizing radiation and possess a specific activity exceeding 70 Becquerels per gram ( 70 Bq/g 70\text{ Bq/g} 70 Bq/g ) or 0.002 microcuries per gram ( 0.002 μ Ci/g 0.002\,\mu\text{Ci/g} 0.002 μ Ci/g ) . Radioisotopes (such as uranium hexafluoride, cobalt-60, and cesium-137) are packaged into certified Type A, Type B, or industrial packagings.

Package Labels vs. Vehicle Placards

Radioactive packages display one of three diamond warning labels determined by surface radiation levels and the Transport Index (TI) —the maximum radiation level in millirems per hour measured at 1 meter from the package surface:

Radioactive White-I: Surface radiation ≤ 0.5 mrem/hr \le 0.5\text{ mrem/hr} ≤ 0.5 mrem/hr ; TI = 0 \text{TI} = 0 TI = 0 . Lowest hazard.

Radioactive Yellow-II: Surface radiation > 0.5 > 0.5 > 0.5 up to 50 mrem/hr 50\text{ mrem/hr} 50 mrem/hr ; TI ≤ 1.0 \text{TI} \le 1.0 TI ≤ 1.0 . Medium radiation.

Radioactive Yellow-III: Surface radiation > 50 > 50 > 50 up to 200 mrem/hr 200\text{ mrem/hr} 200 mrem/hr ; or TI > 1.0 \text{TI} > 1.0 TI > 1.0 up to 10.0 10.0 10.0 .

Important

The Yellow-III Rule: Under 49 CFR § 172.504 (Table 1), any transport vehicle carrying one or more packages bearing the Radioactive Yellow-III label must display RADIOACTIVE diamond placards on all four exterior sides, regardless of the shipment's weight. White-I and Yellow-II packages do not trigger mandatory vehicle placarding.

Class 8: Corrosive Materials (49 CFR § 173.136)

A Class 8 corrosive material is a liquid or solid that causes full thickness destruction of intact human skin tissue at the site of contact within specified observation periods (tested in accordance with OECD Guidelines), or a liquid that exhibits a severe corrosion rate on steel or aluminum exceeding 6.25 mm (0.25 inch) per year at a test temperature of 131°F (55°C). Examples include sulfuric acid, hydrochloric acid, nitric acid, phosphoric acid, and sodium hydroxide (caustic soda) .

Class 9: Miscellaneous Hazardous Materials (49 CFR § 173.140)

Class 9 encompasses materials that present a hazard during transportation but do not meet the legal definition of any other hazard class (Classes 1 through 8). Commodities include:

Lithium Batteries: Lithium-ion and lithium-metal batteries, which pose thermal runaway risks.

Elevated Temperature Materials: Liquids offered or transported at temperatures at or above 212°F (100°C) , or solids offered or transported at temperatures at or above 464°F (240°C) (e.g., hot liquid asphalt, molten sulfur).

Dry Ice (Carbon Dioxide, Solid): Poses asphyxiation and pressure-rupture hazards in enclosed spaces.

Environmentally Hazardous Substances: Regulated pollutants and hazardous wastes not meeting other hazard criteria (e.g., polychlorinated biphenyls / PCBs).

Master Hazard Class Reference Table

  • Class / Div Class Name Primary Hazard Definition Common Commercial Commodities
  • 1.1 Explosives Mass explosion hazard affecting virtually entire load Dynamite, TNT, Black Powder
  • 1.2 Explosives Projection hazard without mass explosion Flares, Projectiles, Rocket Motors
  • 1.3 Explosives Fire hazard with minor blast or projection Display Fireworks, Smokeless Powder
  • 1.4 Explosives Minor explosion hazard largely confined to package Small Arms Ammunition, Consumer Fireworks
  • 1.5 Explosives Very insensitive blasting agents with mass explosion ANFO (Ammonium Nitrate-Fuel Oil)
  • 1.6 Explosives Extremely insensitive articles without mass explosion Military Ordnance Articles

2.1 Flammable Gas Ignitable at ≤ 13 % \le 13\% ≤ 13% volume or range ≥ 12 % \ge 12\% ≥ 12% with air Propane, Acetylene, Hydrogen, Butane

2.2 Non-Flammable Gas Compressed gas ≥ 40.6 psia \ge 40.6\text{ psia} ≥ 40.6 psia at 68°F; asphyxiants Nitrogen, Helium, Carbon Dioxide, Argon

2.3 Poison Gas Toxic by inhalation; L C 50 ≤ 5 , 000 ppm LC_{50} \le 5,000\text{ ppm} L C 50 ​ ≤ 5 , 000 ppm Chlorine, Phosgene, Sulfur Dioxide

3 Flammable Liquid Liquid with flash point ≤ 140 °F \le 140\text{°F} ≤ 140 °F (60°C) Gasoline, Ethanol, Acetone, Toluene

Comb Combustible Liquid Liquid with flash point ≥ 140 °F \ge 140\text{°F} ≥ 140 °F and < 200 °F < 200\text{°F} < 200 °F Diesel Fuel, Fuel Oil No. 2, Kerosene

4.1 Flammable Solid Friction/heat ignition; desensitized explosives Safety Matches, Sulfur, Nitrocellulose

4.2 Spontaneously Comb. Pyrophoric (ignites ≤ 5 min \le 5\text{ min} ≤ 5 min in air); self-heating White Phosphorus, Oily Rags, Charcoal

  • 4.3 Dangerous When Wet Water-reactive; emits flammable/toxic gas Metallic Sodium, Calcium Carbide
  • 5.1 Oxidizer Yields oxygen to stimulate combustion Ammonium Nitrate, Hydrogen Peroxide
  • 5.2 Organic Peroxide Thermal instable, − O − O − -O-O- − O − O − molecular bond Benzoyl Peroxide, MEKP
  • 6.1 Toxic Material Harmful via ingestion, skin, inhalation Potassium Cyanide, Arsenic, Pesticides

6.2 Infectious Substance Viable pathogens, bacteria, infectious viruses Anthrax Cultures, Regulated Medical Waste

7 Radioactive Material Specific activity > 70 Bq/g > 70\text{ Bq/g} > 70 Bq/g ( 0.002 μ Ci/g 0.002\,\mu\text{Ci/g} 0.002 μ Ci/g ) Uranium Hexafluoride, Cobalt-60

  • 8 Corrosive Material Full skin thickness destruction; metal corrosion Sulfuric Acid, Hydrochloric Acid, Lye
  • 9 Miscellaneous Hazmat Environmental hazards, elevated temp, batteries Lithium Batteries, Dry Ice, Hot Asphalt
  • Commercial Driving Scenarios in Virginia
  • Scenario 1: Mixed Dock Freight in Richmond

A commercial driver picking up an LTL (less-than-truckload) freight consignment at a Richmond terminal is assigned pallets containing Class 3 flammable liquids (flash point 65°F) and drums of Class 8 corrosive acid . The driver must verify whether the two materials are segregated in compliance with 49 CFR § 177.848. Under the federal segregation table, cyanides or sulfide wastes cannot be loaded with acids (which liberate lethal hydrogen cyanide or hydrogen sulfide gas), and corrosive liquids must not be placed above flammable liquids where leaks could cause fire.

Scenario 2: Heavy Precipitation Along the I-81 Mountain Corridor

A driver hauling drums of Division 4.3 (Dangerous When Wet) calcium carbide across Virginia's Interstate 81 encounters severe torrential rain and mountain fog. Because Division 4.3 materials release highly flammable acetylene gas upon the slightest contact with water, the driver must verify during pre-trip inspections that the dry van trailer roof, side seams, and door seals are completely watertight. A leak in cargo containment during a storm could trigger a catastrophic trailer fire.

Common Exam Traps & Pitfalls

Flash Point Threshold Confusion: Exam questions frequently mix up DOT regulations and workplace OSHA standards. Under 49 CFR § 173.120, a Flammable Liquid has a flash point of not more than 140°F (60°C) . Many candidates incorrectly select 100°F (which was the old standard and remains common in NFPA building codes). Combustible liquids range from 140°F up to below 200°F .

The Radioactive Placarding Trap: Students often assume that transporting any Class 7 radioactive material requires vehicle placarding. In reality, under 49 CFR § 172.504 Table 1, only shipments containing Radioactive Yellow-III labeled packages trigger mandatory placarding for any package quantity. Packages labeled Radioactive White-I or Radioactive Yellow-II do not require vehicle placarding.

Blasting Agents Misconception: Test takers often confuse Division 1.4 small arms ammunition with Division 1.5 blasting agents. While Division 1.5 substances (such as ANFO) are "very insensitive," they possess a mass explosion hazard , making them far more dangerous on a commercial scale than Division 1.4 minor safety explosives.