Study guide
7.3 Reading the Segregation Table: X, O, Blank, and Asterisk
Virginia CDL Hazardous Materials Endorsement Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Intent of the Regulations and Transportation Roles
1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What
2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information
2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement
3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings
3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards
4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard
4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules
5 Chapter 5: Hazard Classes and the Hazardous Materials Table
5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material
6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards
6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
7 Chapter 7: Loading, Securement, and Segregation
7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs
8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations
8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding
9 Chapter 9: Driving, Parking, Attendance, and Routing Rules
9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents
10 Chapter 10: Security Awareness and Risk Management
10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response
11 Chapter 11: Emergency Response and Scene Management
11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses
12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting
12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention
13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening
13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals
14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions
14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route
7.3 Reading the Segregation Table: X, O, Blank, and Asterisk
Key Takeaways Explain This Topic AI
An "X" at the intersection of two classes means the materials must not be loaded, transported, or stored together in the same vehicle.
An "O" means the materials may not be loaded together unless they are separated so that co-mingling cannot occur if a package leaks.
A blank cell means the segregation table imposes no restriction on that pair.
An asterisk sends the user to the Class 1 explosives compatibility rules rather than to a simple yes or no answer.
Both the primary hazard class and any subsidiary hazard class of a package must be checked against the table.
Last updated: September 2026
7.3 Reading the Segregation Table: X, O, Blank, and Asterisk
Warning
The Chemical Threat of Incompatible Co-Loading : Placing incompatible hazardous materials in the same commercial motor vehicle creates an extreme catastrophe risk. In the event of packaging failure, container puncture, or minor highway vibration, co-mingling incompatible chemicals triggers rapid exothermic reactions, toxic gas clouds, violent explosions, or intense structural fires that consume the vehicle in seconds. Commercial drivers are legally required under 49 CFR § 177.848 to cross-reference every hazard class and division loaded on their vehicle against the federal Segregation Table before departing any freight facility.
Co-loading dangerous goods is heavily regulated across both interstate commerce and Virginia state highways. Specially trained motor carrier safety troopers of the Virginia State Police actively inspect freight manifests and trailer interiors at state weigh stations and port inspection bays (such as the Port of Virginia terminals in Norfolk and Portsmouth) to ensure full segregation compliance. Understanding how to navigate the Segregation Table is a mandatory competency for any professional driver carrying the Hazardous Materials Endorsement.
Purpose and Scope of the Segregation Table (49 CFR § 177.848)
The federal Segregation Table for Hazardous Materials applies to all freight loaded, transported, or stored together in the same transport vehicle, freight container, or storage facility during transit .
Critical Rules Governing Scope
Primary and Subsidiary Hazards Both Count : Under 49 CFR § 177.848(e)(6), drivers must check the segregation requirements for both the primary hazard class AND any subsidiary hazard classes displayed on shipping papers and package warning labels. For instance, if a shipment consists of a Class 8 corrosive liquid with a Division 5.1 oxidizer subsidiary hazard, the material must be segregated against both Class 8 and Division 5.1 incompatibilities!
Bulk and Non-Bulk Packages : Segregation rules apply to all non-bulk packages, intermediate bulk containers (IBCs), portable tanks, and freight containers loaded onto flatbeds or inside enclosed dry vans.
The Segregation Chart Grid and Code Meanings
The Segregation Table is organized as a two-dimensional grid. Drivers locate one hazard class along the horizontal top header and the other hazard class down the vertical left column. The intersecting cell displays one of four designations: +-----------------------------------------------------------------------------------------+
- | The Four Segregation Table Designations (49 CFR § 177.848) |
- +-----------------------------------------------------------------------------------------+
- | Symbol | Regulatory Status | Mandatory Operational Mandate |
- +----------+--------------------+---------------------------------------------------------+
- | "X" | STRICTLY | MUST NOT be loaded, transported, or stored together in |
- | | PROHIBITED | the same transport vehicle or storage facility. |
- +----------+--------------------+---------------------------------------------------------+
- | "O" | CONDITIONAL | Must NOT be loaded together UNLESS separated by a |
- | | SEPARATION | minimum horizontal distance of 4 feet (1.2 meters), or |
- | | | by an approved non-combustible floor-to-ceiling barrier.|
- +----------+--------------------+---------------------------------------------------------+
- | Blank | NO RESTRICTION | No segregation restrictions apply under this specific |
- | | UNDER TABLE | table (general chemical compatibility still applies). |
- +----------+--------------------+---------------------------------------------------------+
- | "*" | CLASS 1 EXPLOSIVE | Compatibility groups (A through S) apply under the |
- | | SPECIAL RULES | specialized Explosives Compatibility Table (§ 177.848(f))|
- +-----------------------------------------------------------------------------------------+
- Deconstructing the "O" Separation Rule
When the symbol "O" appears at the intersection of two classes, the regulations permit co-loading only under strict physical isolation protocols :
Horizontal Distance : The packages must be separated by a minimum horizontal floor distance of 4 feet (1.2 meters) .
Preventing Co-Mingling : The space between the packages must not be used to store other incompatible goods, and the floor layout must prevent liquids from pooling or flowing toward the separated cargo in the event of package leakage.
Vertical Partitions : Alternatively, the materials may be separated by an intervening, non-combustible wall or partition that spans completely from the trailer floor to the ceiling.
Detailed Comparison Table: Common Incompatible Pairs and Regulatory Outcomes
Chemical Combination Hazard Classes Involved Segregation Code Regulatory Mandate & Physical Consequence
Cyanides + Acids Division 6.1 + Class 8 X Strictly Prohibited : Mixing generates lethal hydrogen cyanide ( H C N HCN H CN ) gas; instant fatality hazard.
Nitric Acid + Flammable Liquids Class 8 (5.1 sub) + Class 3 X Strictly Prohibited : Nitric acid oxidizes solvents violently; triggers immediate flash fires and explosion.
Dynamite + Gasoline Division 1.1 + Class 3 X Strictly Prohibited : Mass detonation hazard; explosives must never travel with flammable liquids.
Poisons + Foodstuffs / Feeds Division 6.1 / 2.3 + Edibles PROHIBITED Strictly Prohibited by § 177.841(e) : Must never be co-loaded unless in certified airtight metal overpacks.
Flammable Gas + Non-Flammable Gas Division 2.1 + Division 2.2 Blank Permitted : No restriction on segregation table; cylinders must still be secured against rolling.
Flammable Liquids + Corrosive Liquids Class 3 + Class 8 (general) O Conditional Separation : Permitted only if separated by ≥ 4 ft \ge 4\text{ ft} ≥ 4 ft horizontally or by non-combustible partition.
Oxidizers + Corrosive Liquids Division 5.1 + Class 8 O Conditional Separation : Permitted only if separated by ≥ 4 ft \ge 4\text{ ft} ≥ 4 ft horizontally; prevent corrosive pooling.
Organic Peroxides + Flammables Division 5.2 + Class 3 X Strictly Prohibited : Thermal instability of peroxides accelerates solvent combustion explosively.