Study guide
6.1 Packing Groups and UN Performance Packaging Marks
Virginia CDL Hazardous Materials Endorsement Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Intent of the Regulations and Transportation Roles
1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What
2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information
2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement
3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings
3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards
4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard
4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules
5 Chapter 5: Hazard Classes and the Hazardous Materials Table
5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material
6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards
6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
7 Chapter 7: Loading, Securement, and Segregation
7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs
8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations
8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding
9 Chapter 9: Driving, Parking, Attendance, and Routing Rules
9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents
10 Chapter 10: Security Awareness and Risk Management
10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response
11 Chapter 11: Emergency Response and Scene Management
11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses
12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting
12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention
13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening
13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals
14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions
14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route
6.1 Packing Groups and UN Performance Packaging Marks
Key Takeaways Explain This Topic AI
Packing Group I means great danger, Packing Group II means medium danger, and Packing Group III means minor danger.
Class 1 explosives, Class 2 gases, Class 7 radioactive materials, Division 5.2 organic peroxides, and Division 6.2 infectious substances are not assigned packing groups.
An X-rated container may hold Packing Group I, II, or III material; a Y-rated container may hold Packing Group II or III; a Z-rated container may hold Packing Group III only.
Higher-rated packaging may always be used for a lower-hazard material, but lower-rated packaging may never be used for a higher-hazard material.
The packing group appears in Column 5 of the Hazardous Materials Table in roman numerals and is the last element of the basic description.
Last updated: September 2026
6.1 Packing Groups and UN Performance Packaging Marks
In hazardous materials logistics, identifying the general hazard class (such as flammable liquid or corrosive) is only the first step. Motor carriers and commercial drivers must also determine the severity of the chemical danger and account for chemicals that possess multiple simultaneous hazards .
Title 49 of the Code of Federal Regulations addresses these challenges through two interconnected systems: Packing Groups , which quantify chemical hazard severity to dictate container strength, and the Precedence of Hazard System (49 CFR § 173.2a) , which resolves primary versus subsidiary risks.
Packing Group Severity Classifications
For most hazardous materials in Classes 3, 4, 5, 6.1, 8, and 9, the Hazardous Materials Regulations assign one of three Packing Groups (PG) denoted by Roman numerals in Column 5 of the Hazardous Materials Table: +-----------------------+-----------------------+-----------------------------------------------------------+
- | Packing Group | Danger Level | General Regulatory Criteria |
- +-----------------------+-----------------------+-----------------------------------------------------------+
- | Packing Group I (PG I)| Great Danger | High acute toxicity, lowest flash points / boiling points |
- | | | Rapid, full-thickness skin destruction (<= 3 minutes) |
- +-----------------------+-----------------------+-----------------------------------------------------------+
- | Packing Group II (PG II) Medium Danger | Moderate toxicity, moderate flash points (< 73°F) |
- | | | Corrosive skin destruction within 3 to 60 minutes |
- +-----------------------+-----------------------+-----------------------------------------------------------+
- | Packing Group III (PG III) Minor Danger | Low toxicity, higher flash points (>= 73°F), |
- | | | Mild corrosives (skin destruction within 1 to 4 hours) |
- +-----------------------+-----------------------+-----------------------------------------------------------+
- Detailed Criteria by Hazard Class
Class 3 Flammable Liquids:
PG I (Great Danger): Liquids with an initial boiling point ≤ 95 °F (35°C) \le 95\text{°F (35°C)} ≤ 95 °F (35°C) regardless of flash point (e.g., carbon disulfide, pentane).
PG II (Medium Danger): Liquids with a flash point < 73 °F (23°C) < 73\text{°F (23°C)} < 73 °F (23°C) and initial boiling point > 95 °F (35°C) > 95\text{°F (35°C)} > 95 °F (35°C) (e.g., gasoline, acetone, ethanol).
PG III (Minor Danger): Liquids with a flash point ≥ 73 °F (23°C) \ge 73\text{°F (23°C)} ≥ 73 °F (23°C) and ≤ 140 °F (60°C) \le 140\text{°F (60°C)} ≤ 140 °F (60°C) with boiling point > 95 °F > 95\text{°F} > 95 °F , as well as combustible liquids.
Class 8 Corrosives:
PG I: Full thickness destruction of intact skin tissue within an exposure time of 3 minutes or less with observation up to 1 hour (e.g., concentrated nitric acid).
PG II: Skin destruction within an exposure time between 3 minutes and 60 minutes with observation up to 14 days (e.g., hydrochloric acid, sodium hydroxide solution).
PG III: Skin destruction within 1 hour to 4 hours , or materials that do not destroy skin but corrode steel or aluminum surfaces faster than 6.25 mm (0.25 in) per year at 131°F.
Division 6.1 Toxic Materials:
PG I: Extreme toxicity: Oral L D 50 ≤ 5 mg/kg LD_{50} \le 5\text{ mg/kg} L D 50 ≤ 5 mg/kg , dermal L D 50 ≤ 50 mg/kg LD_{50} \le 50\text{ mg/kg} L D 50 ≤ 50 mg/kg , or inhalation L C 50 ≤ 200 ppm LC_{50} \le 200\text{ ppm} L C 50 ≤ 200 ppm (Vapor Inhalation Hazard Zone A or B).
PG II: Medium toxicity: Oral L D 50 > 5 to 50 mg/kg LD_{50} > 5\text{ to } 50\text{ mg/kg} L D 50 > 5 to 50 mg/kg , dermal L D 50 > 50 to 200 mg/kg LD_{50} > 50\text{ to } 200\text{ mg/kg} L D 50 > 50 to 200 mg/kg , or inhalation L C 50 > 200 to 1 , 000 ppm LC_{50} > 200\text{ to } 1,000\text{ ppm} L C 50 > 200 to 1 , 000 ppm .
PG III: Minor toxicity: Oral L D 50 > 50 to 300 mg/kg LD_{50} > 50\text{ to } 300\text{ mg/kg} L D 50 > 50 to 300 mg/kg (liquids) or up to 2 , 000 mg/kg 2,000\text{ mg/kg} 2 , 000 mg/kg (solids).
Hazard Classes Without Packing Groups
Several hazard classes do not use packing groups because their risk is managed through specialized physical containment or distinct division frameworks:
Class 1 (Explosives): Hazard governed by six numerical divisions (1.1–1.6) and compatibility group letters.
Class 2 (Gases): Pressure containment governed by cylinder DOT specification ratings (e.g., DOT-3AA2015) and gas properties rather than packing groups.
Class 7 (Radioactive Materials): Regulated by total activity ( A 1 / A 2 A_1/A_2 A 1 / A 2 values), radiation fields (White-I, Yellow-II, Yellow-III), and certified package designs (Type A, Type B, Type C).
Division 5.2 (Organic Peroxides): Regulated by thermal decomposition chemistry and assigned to Types A through G.
Division 6.2 (Infectious Substances): Classified strictly into Category A (UN2814/UN2900) or Category B (UN3373).
Packaging Performance Standards (UN Specification Markings)
Under 49 CFR Part 178 , all non-bulk and bulk containers designed to carry hazardous materials must undergo rigorous performance testing (drop tests, hydrostatic pressure tests, stacking tests, and leakage tests). The certified container displays an embossed or printed UN specification marking : UN 1A1 / X 1.8 / 300 / 24 / USA / +AA1234
- | | | | | | |
- | | | | | | +-- Manufacturer / Certification Code
- | | | | | +------- Year of Manufacture (2024)
- | | | | +------------- Test Pressure in kPa (300 kPa)
- | | | +------------------- Maximum Specific Gravity (1.8)
- | | +---------------------- Packaging Performance Code (X, Y, or Z)
- | +-------------------------- Container Code: 1A1 = Closed-head steel drum
- +----------------------------- United Nations Packaging Symbol
- Performance Testing Letter Codes
The letter following the container type identifies the packaging's certified integrity level:
X Packaging: Certified to the highest test standards (e.g., tested with a 1.8-meter drop). Legally authorized to contain Packing Group I, Packing Group II, and Packing Group III materials.
Y Packaging: Certified to medium test standards (e.g., 1.2-meter drop). Legally authorized to contain Packing Group II and Packing Group III materials only. Never authorized for Packing Group I.
Z Packaging: Certified to minimum test standards (e.g., 0.8-meter drop). Legally authorized to contain Packing Group III materials only.
Important
The Packaging Downward Rule: Packaging with a higher performance rating may always be used to transport lower-hazard materials (an X-rated container can hold PG I, II, or III; a Y-rated container can hold PG II or III). However, lower-rated packaging can NEVER be used for higher-hazard materials (a Z-rated drum can never carry PG I or PG II; a Y-rated drum can never carry PG I).