Study guide
6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
Virginia CDL Hazardous Materials Endorsement Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Intent of the Regulations and Transportation Roles
1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What
2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information
2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement
3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings
3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards
4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard
4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules
5 Chapter 5: Hazard Classes and the Hazardous Materials Table
5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material
6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards
6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
7 Chapter 7: Loading, Securement, and Segregation
7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs
8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations
8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding
9 Chapter 9: Driving, Parking, Attendance, and Routing Rules
9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents
10 Chapter 10: Security Awareness and Risk Management
10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response
11 Chapter 11: Emergency Response and Scene Management
11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses
12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting
12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention
13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening
13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals
14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions
14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route
6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
Key Takeaways Explain This Topic AI
When a material meets more than one hazard class definition, 49 CFR 173.2a ranks the classes; Class 7 radioactive material outranks everything else.
After Class 7 come Division 2.3, Division 2.1, Division 2.2, and then Division 6.1 Packing Group I materials that are poisonous by inhalation.
Division 4.3 and Division 5.2 are not in that ranked list; they are resolved through the precedence of hazard table in 49 CFR 173.2a(b).
A subsidiary hazard class number is entered in parentheses immediately after the primary hazard class on the shipping paper.
A subsidiary Division 6.1 inhalation hazard (Zone A or B) or a subsidiary Division 4.3 dangerous-when-wet risk requires that placard in addition to the primary placard, in any quantity.
Last updated: September 2026
- 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
- Primary Hazard vs. Subsidiary Hazard (49 CFR § 173.2a)
Many chemicals possess more than one hazardous property. For example, methanol is a Class 3 flammable liquid that is also poisonous if swallowed or absorbed (Division 6.1). Chlorosulfonic acid is a Class 8 corrosive liquid that reacts violently with water (Division 4.3).
To prevent regulatory conflict, the Department of Transportation establishes the Primary Hazard (which dictates the fundamental hazard class, primary label, and base placard) and assigns all other hazards as Subsidiary Hazards .
Precedence of Hazard Hierarchy (49 CFR § 173.2a)
When a material possesses multiple risks, 49 CFR § 173.2a establishes a mandatory statutory hierarchy. The following hazard classes take precedence in descending order:
Class 7 (Radioactive Materials) , other than limited quantities.
Division 2.3 (Gas Toxic by Inhalation) .
Division 2.1 (Flammable Gas) .
Division 2.2 (Non-Flammable, Non-Toxic Gas) .
Division 6.1 (Toxic), Packing Group I, poisonous by inhalation .
Division 4.2 (Pyrophoric material) .
Division 4.1 (Self-reactive material) .
Class 8 (Corrosive), liquid or solid, Packing Group I, dermal toxicity — outranked only by the categories above it.
Division 6.1 (Toxic), Packing Group I, oral or dermal toxicity .
Memorize the top of the list rather than the whole thing: Class 7 always wins , followed by the toxic and flammable gases, and then Division 6.1 Packing Group I poison-inhalation materials. Division 4.3 (Dangerous When Wet) and Division 5.2 (Organic Peroxide) are not in this ranked list; they are resolved through the Precedence of Hazard Table in 49 CFR § 173.2a(b) , which also resolves multiple hazards among Class 3, Class 8, Division 5.1, Division 6.1 (non-inhalation), and Class 9 using relative Packing Group severity.
Shipping Paper Documentation of Subsidiary Hazards
Under 49 CFR § 172.202(a)(2), whenever a material has one or more subsidiary hazards, the subsidiary hazard class or division number must be entered in parentheses immediately following the primary hazard class : UN1992, Flammable liquids, toxic, n.o.s. (contains Methanol, Toluene), 3 (6.1), PG II \text{UN1992, Flammable liquids, toxic, n.o.s. (contains Methanol, Toluene), 3 (6.1), PG II} UN1992, Flammable liquids, toxic, n.o.s. (contains Methanol, Toluene), 3 (6.1), PG II
- 3 = Primary Hazard Class (Flammable Liquid)
- (6.1) = Subsidiary Hazard Division (Toxic Material)
- PG II = Packing Group
- Package Labeling and Mandatory Subsidiary Placarding
Package Labels: Under 49 CFR § 172.402, non-bulk packages must display both the primary hazard label and the subsidiary hazard label displayed within 6 inches of each other.
Vehicle Placarding (49 CFR § 172.505): Standard placarding rules generally apply only to the primary hazard class. However, 49 CFR § 172.505 mandates subsidiary placarding on all four sides of the transport vehicle regardless of quantity for two critical subsidiary risks:
Subsidiary Division 6.1 (Poison Inhalation Hazard / Toxic Inhalation Hazard, Zone A or B): Must display the POISON INHALATION HAZARD or POISON GAS placard in addition to primary placards.
Subsidiary Division 4.3 (Dangerous When Wet): Must display the DANGEROUS WHEN WET placard in addition to primary placards.
Master Packaging & Precedence Reference Table
UN Performance Mark Authorized Packing Groups Relative Strength Drop Test Standard Example Compatible Commodities
X PG I, PG II, PG III Highest 1.8 meters ( 5.9 ft 5.9\text{ ft} 5.9 ft ) Concentrated Fuming Acids, Cyanides, Acrolein
- Y PG II, PG III Medium 1.2 meters ( 3.9 ft 3.9\text{ ft} 3.9 ft ) Gasoline, Paint, Hydrochloric Acid, Acetone
- Z PG III Only Lowest 0.8 meters ( 2.6 ft 2.6\text{ ft} 2.6 ft ) Diesel Fuel, Mild Detergents, Mineral Spirits
- Commercial Driving Scenarios in Virginia
- Scenario 1: Refusing an Illegal Packaging Downgrade in Roanoke
A commercial driver dispatched to a chemical manufacturing facility in Roanoke is assigned 10 drums of a toxic, highly corrosive liquid assigned to Class 8, Packing Group I . During pre-trip cargo inspection, the driver reads the embossed specification markings on the steel drums: UN 1A1/Y1.5/200/24... . The driver notices the performance rating is Y . Under 49 CFR § 178.503, a Y-rated drum is tested and certified only for Packing Groups II and III. Loading a PG I material into a Y-rated drum is a major federal violation. The driver correctly refuses to sign the bill of lading or accept the load until the chemical is repackaged into certified X containers.
Scenario 2: Mandatory Dual Placarding Along I-64 in Norfolk
A flatbed tractor-trailer picks up a cargo consignment of chemical cylinders bearing the basic description: UN3286, Flammable liquid, toxic, corrosive, n.o.s., 3 (6.1, 8), PG I, Poison Inhalation Hazard Zone B . While the primary hazard class is Class 3 (FLAMMABLE), the shipment carries a subsidiary risk of Division 6.1 Poison Inhalation Hazard (Zone B) . Under 49 CFR § 172.505, the driver cannot rely solely on FLAMMABLE placards. The vehicle must be placarded with both FLAMMABLE and POISON INHALATION HAZARD diamond placards on all four sides of the trailer , regardless of the weight of the shipment.
Common Exam Traps & Pitfalls
The Inverted Letter Trap: Candidates frequently confuse packaging performance letters (X, Y, Z) with packing group Roman numerals (I, II, III). A common exam error is assuming that Z represents the highest rating (because Z is the end of the alphabet) and X represents the lowest. In reality, X is the strongest (PG I, II, III) , Y is intermediate (PG II, III) , and Z is the weakest (PG III only) .
Assuming All Classes Have Packing Groups: When asked which hazard class does not use packing groups, many examinees guess Class 8 or Class 3. Remember that Class 2 (Gases), Class 7 (Radioactive), and Class 1 (Explosives) do not use packing groups .
The Subsidiary Placarding Fallacy: Many drivers believe that subsidiary placards are never required on highway transport vehicles and only appear on shipping papers. On the exam, remember that 49 CFR § 172.505 requires subsidiary placarding on all four sides for Poison Inhalation Hazard (Zone A or B) and Dangerous When Wet (Division 4.3) materials at any quantity .