Study guide

3.3 Package Markings on Non-Bulk Packages

Virginia CDL Hazardous Materials Endorsement Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Intent of the Regulations and Transportation Roles

1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What

2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information

2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement

3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings

3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards

4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard

4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules

5 Chapter 5: Hazard Classes and the Hazardous Materials Table

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material

6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards

6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding

7 Chapter 7: Loading, Securement, and Segregation

7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs

8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations

8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding

9 Chapter 9: Driving, Parking, Attendance, and Routing Rules

9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents

10 Chapter 10: Security Awareness and Risk Management

10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response

11 Chapter 11: Emergency Response and Scene Management

11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses

12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting

12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention

13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening

13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals

14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions

14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route

3.3 Package Markings on Non-Bulk Packages

Key Takeaways Explain This Topic AI

Non-bulk packages must display the proper shipping name and the UN or NA identification number, plus the name and address of the shipper or consignee.

Package orientation arrows must appear on two opposite vertical sides of combination packagings containing liquids.

Non-bulk packages of Division 2.3 or Division 6.1 Hazard Zone A or B materials must be marked INHALATION HAZARD.

An overpack that hides the inner package markings and labels must be marked "OVERPACK" and must reproduce the required markings and labels on the outside.

Shippers apply RQ, MARINE POLLUTANT, BIOHAZARD, HOT, and INHALATION HAZARD markings when the rules require them.

Last updated: September 2026

3.3 Package Markings on Non-Bulk Packages

Important

The Three-Tier Hazard Communication Hierarchy : Hazardous materials communication operates through three distinct, coordinated layers: Markings identify the specific contents, packaging specifications, and handling instructions of a package; Labels identify the hazard class and division of an individual package (4x4 inch diamonds); and Placards identify the hazard class of the transport vehicle itself (diamonds measuring at least 250 mm / 9.84 inches on each side). Conflating package labels with vehicle placards is one of the most common failure points on the Virginia CDL HazMat exam.

Every commercial driver transporting hazardous materials must understand how to inspect, verify, and accept packages before loading them into a commercial motor vehicle. Under Federal Motor Carrier Safety Regulations (49 CFR § 392.9) and Virginia motor carrier safety enforcement standards enforced by the Virginia State Police Safety Division, a driver is legally prohibited from operating a vehicle containing packages that are improperly marked, inadequately labeled, leaking, or structurally compromised.

Package Markings (49 CFR Part 172 Subpart D)

Package markings consist of descriptive text, numbers, specification codes, or instructional symbols applied directly to the outer surface of a non-bulk packaging (e.g., drums, boxes, jerricans, cylinders). Unlike hazard labels, which use standardized colors and pictograms, markings provide precise administrative and chemical details.

1. Mandatory Basic Markings on Non-Bulk Packages (49 CFR § 172.301)

Except as otherwise provided in the Hazardous Materials Regulations (HMR), every non-bulk package containing a hazardous material must display:

Proper Shipping Name (PSN) : The exact chemical or generic name designated in Column 2 of the Hazardous Materials Table (§ 172.101). Abbreviations and unapproved trade names are strictly prohibited.

Identification Number : The assigned four-digit United Nations (UN) or North American (NA) number (e.g., "UN1993" or "UN 1203"), preceded by the letters "UN" or "NA". The identification number must be printed in durable, contrasting characters with a minimum height of 12 mm (0.47 inches) for packages over 30 liters (7.9 gallons) or 30 kg (66 lbs).

Consignor or Consignee Name and Address : The full legal name and address of either the shipper (consignor) or the receiver (consignee) must be visibly marked on the package, establishing legal chain-of-custody and emergency accountability.

Technical Names for Generic or N.O.S. Descriptions (49 CFR § 172.203(k) & § 172.301(b)) : When a material is shipped under a generic or "not otherwise specified" (n.o.s.) entry (such as Corrosive liquid, acidic, organic, n.o.s. ), the recognized chemical technical name of the hazardous constituent must be shown in parentheses immediately following or below the proper shipping name (e.g., Corrosive liquid, acidic, organic, n.o.s. (caprylyl chloride) ).

2. Condition-Specific and Special Package Markings

Certain chemical classes, physical states, and shipping configurations trigger mandatory supplemental markings under federal and Virginia law: +-----------------------------------------------------------------------------------------+

  • | Specialized Package Markings Matrix |
  • +-----------------------------------------------------------------------------------------+
  • | Marking Type | Regulatory Citation | Primary Purpose & Visual Specification |
  • +----------------------+---------------------+--------------------------------------------+
  • | Package Orientation | 49 CFR § 172.312 | Two upright arrows within a rectangular |
  • | Arrows | | border; placed on TWO OPPOSITE VERTICAL |
  • | | | sides of liquid combination packagings. |
  • +----------------------+---------------------+--------------------------------------------+
  • | Inhalation Hazard | 49 CFR § 172.313 | Mandatory text 'INHALATION HAZARD' for |
  • | | | materials meeting TIH/PIH criteria. |
  • +----------------------+---------------------+--------------------------------------------+
  • | Marine Pollutant | 49 CFR § 172.322 | Fish and tree symbol indicating severe |
  • | | | environmental toxicity to aquatic life. |
  • +----------------------+---------------------+--------------------------------------------+
  • | OVERPACK | 49 CFR § 173.25 | Minimum 12 mm text when secondary enclosure|
  • | | | obscures required inner package markings. |
  • +----------------------+---------------------+--------------------------------------------+
  • | Limited Quantity | 49 CFR § 172.315 | Square-on-point mark with black top/bottom |
  • | | | tips; provides relief from full labeling. |
  • +----------------------+---------------------+--------------------------------------------+
  • | Lithium Battery | 49 CFR § 173.185 | Hatched border with UN number, battery |
  • | Handling Mark | | pictogram, and emergency contact telephone.|
  • +----------------------+---------------------+--------------------------------------------+

Package Orientation Arrows (49 CFR § 172.312) : Required on combination packages having inner packagings containing liquid hazardous materials, single packagings fitted with vents, and cryogenic liquid containers. The marking consists of two black or red arrows pointing upward on a contrasting background, enclosed within a rectangular border. Critical Rule : Orientation arrows must be displayed on two opposite vertical sides of the package. Applying arrows to only one side, or printing them on the top or bottom of the container, constitutes a direct federal violation.

Inhalation Hazard (49 CFR § 172.313) : Any non-bulk package containing a material that is poisonous by inhalation (Toxic Inhalation Hazard / Poison Inhalation Hazard) under Division 2.3 or Division 6.1 (Hazard Zone A or B) must be clearly marked with the words "INHALATION HAZARD" in addition to any required hazard warning labels.

Overpack Marking (49 CFR § 173.25 & § 172.301(a)(3)) : An overpack is an enclosure used by a single consignor to provide protection or convenience in handling of a package or to consolidate two or more packages (such as a wooden crate or a shrink-wrapped pallet). If the required proper shipping names, UN numbers, and hazard warning labels on the inner packages are not visible from the outside , the exterior of the overpack must be marked with the word "OVERPACK" (with lettering at least 12 mm / 0.5 inches high) and must reproduce all required markings and labels found on the inner containers.

Limited Quantity Marking (49 CFR § 172.315) : Materials shipped under limited quantity exceptions travel under a diamond-shaped marking with solid black top and bottom points and a white center. Surface transport of limited quantities provides substantial regulatory relief, exempting the shipment from standard hazard warning labels, general placarding, and in many cases shipping papers.