Study guide
4.1 Placard Table 1: The Any-Quantity Materials
Virginia CDL Hazardous Materials Endorsement Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Intent of the Regulations and Transportation Roles
1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What
2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information
2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement
3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings
3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards
4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard
4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules
5 Chapter 5: Hazard Classes and the Hazardous Materials Table
5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material
6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards
6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding
7 Chapter 7: Loading, Securement, and Segregation
7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs
8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations
8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding
9 Chapter 9: Driving, Parking, Attendance, and Routing Rules
9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents
10 Chapter 10: Security Awareness and Risk Management
10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response
11 Chapter 11: Emergency Response and Scene Management
11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses
12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting
12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention
13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening
13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals
14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions
14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route
4.1 Placard Table 1: The Any-Quantity Materials
Key Takeaways Explain This Topic AI
Table 1 lists eight categories: Divisions 1.1, 1.2, and 1.3; Division 2.3; Division 4.3; Division 5.2 organic peroxide Type B temperature controlled; Division 6.1 inhalation hazard Zone A or B; and Class 7 Radioactive Yellow III.
A Table 1 material must be placarded no matter how little is on board — even one pound or one cylinder.
Only packages bearing the Radioactive Yellow III label trigger the RADIOACTIVE placard; White I and Yellow II packages do not.
The three things you need in order to choose placards are the hazard class, the amount being shipped, and the total amount of all hazardous materials of all classes on the vehicle.
Table 1 materials can never be represented by the DANGEROUS placard.
Last updated: September 2026
4.1 Placard Table 1: The Any-Quantity Materials
Note
Primary Purpose of Placards : Placards are large, durable, diamond-shaped warning signs displayed on the exterior of a commercial transport vehicle or bulk packaging. Their fundamental purpose is to communicate the chemical hazards of the cargo from a distance of at least 100 feet during an emergency. When Virginia State Police troopers, local firefighters, or hazardous materials response teams arrive at a collision scene on Interstate 95 or Interstate 81, placards allow them to determine safe staging distances, evacuation radiuses, and appropriate firefighting agents before approaching the vehicle.
While the shipper is legally obligated to supply the proper placards or certify that they are already available, the commercial motor vehicle driver and motor carrier are strictly responsible for verifying that placards are correct, undamaged, and properly displayed before moving the vehicle onto any public highway (49 CFR § 172.506). Operating an unplacarded or misplacarded vehicle carries severe civil penalties, immediate out-of-service orders during roadside inspections, and potential criminal liability in the event of an unreported catastrophic release.
Table 1 Materials: The "Placard Any Quantity" Rule (49 CFR § 172.504(e))
Federal regulations divide all hazardous materials into two placarding tables based on the catastrophic severity of the hazard. Table 1 materials represent extreme, life-threatening, or mass-casualty risks.
Warning
The Table 1 Absolute Zero Exemption : There is no minimum weight threshold for Table 1 materials. If a transport vehicle carries even one pound (0.45 kg) , one cylinder, or one small sample of a Table 1 material in a non-bulk package, the transport vehicle must be placarded on all four sides with the specific placard designated for that hazard class.
The Complete Roster of Table 1 Materials
Drivers must memorize the eight categories listed in Table 1 (49 CFR 172.504(e)):
Division 1.1 Explosives : Materials that pose a mass explosion hazard (an explosion that affects almost the entire load instantaneously, such as dynamite, TNT, or bulk demolition charges). Displays the EXPLOSIVES 1.1 placard.
Division 1.2 Explosives : Materials that pose a projection hazard but not a mass explosion hazard (e.g., military projectiles, artillery shells, flare rockets). Displays the EXPLOSIVES 1.2 placard.
Division 1.3 Explosives : Materials that pose a fire hazard and either a minor blast hazard or a minor projection hazard (e.g., commercial display fireworks, propellants). Displays the EXPLOSIVES 1.3 placard.
Division 2.3 Poison Gas / Gas Toxic by Inhalation : Gases that are known to be so toxic to humans as to pose an extreme hazard to health during transportation (e.g., chlorine, phosgene, hydrogen cyanide, anhydrous sulfur dioxide). Displays the POISON GAS placard.
Division 4.3 Dangerous When Wet : Water-reactive materials that, by contact with water, become spontaneously flammable or give off flammable or toxic gases in dangerous quantities (e.g., metallic sodium, potassium, calcium carbide). Displays the DANGEROUS WHEN WET placard.
Division 5.2 Organic Peroxide (Type B, liquid or solid, temperature controlled) : Extremely sensitive chemical formulations that can undergo explosive decomposition, self-accelerating thermal reactions, or violent combustion under ambient conditions. Displays the ORGANIC PEROXIDE placard.
Division 6.1 Poison Inhalation Hazard (PIH / TIH) : Toxic liquids or solids that meet the criteria for Packing Group I, Hazard Zone A or Hazard Zone B inhalation toxicity. Displays the POISON INHALATION HAZARD placard.
Class 7 Radioactive Material (bearing Radioactive Yellow III label only) : Shipments carrying packages that display the RADIOACTIVE YELLOW III hazard label, or highway route-controlled quantities, or exclusive-use shipments of low specific activity (LSA) materials. Displays the RADIOACTIVE placard.
Table 1 vs. Table 2 Placarding Matrix
Hazard Class or Division Placarding Table Threshold for Non-Bulk Packages Placard Name / Display Required Key Operational Note
- 1.1 Explosives Table 1 ANY QUANTITY (1 lb) EXPLOSIVES 1.1 Mass explosion risk; route/parking rules apply
- 1.2 Explosives Table 1 ANY QUANTITY (1 lb) EXPLOSIVES 1.2 Projection hazard; severe safety standoff
- 1.3 Explosives Table 1 ANY QUANTITY (1 lb) EXPLOSIVES 1.3 Fire/blast hazard; display pyrotechnics
- 2.3 Poison Gas Table 1 ANY QUANTITY (1 lb) POISON GAS Lethal inhalation hazard; Zone A/B/C/D
- 4.3 Dangerous When Wet Table 1 ANY QUANTITY (1 lb) DANGEROUS WHEN WET Water creates flammable/poison gas
5.2 Organic Peroxide (Type B, Temp) Table 1 ANY QUANTITY (1 lb) ORGANIC PEROXIDE Emergency temperature control mandatory
6.1 Inhalation Hazard (Zone A/B) Table 1 ANY QUANTITY (1 lb) POISON INHALATION HAZARD Extreme lethal toxicity; zero threshold
7 Radioactive (Yellow III only) Table 1 ANY QUANTITY (1 lb) RADIOACTIVE High radiation transport index; exclusive use
1.4, 1.5, 1.6 Explosives Table 2 1,001 lbs or more aggregate EXPLOSIVES 1.4, 1.5, 1.6 Minor blast risk / blasting agents
2.1 Flammable Gas Table 2 1,001 lbs or more aggregate FLAMMABLE GAS Flash fires; vapor dispersion hazard
2.2 Non-Flammable Gas Table 2 1,001 lbs or more aggregate NON-FLAMMABLE GAS Asphyxiation and pressure rupture hazard
3 Flammable Liquid Table 2 1,001 lbs or more aggregate FLAMMABLE Flash point < 140°F (60°C)
Combustible Liquid Table 2 1,001 lbs or more aggregate COMBUSTIBLE (or FLAMMABLE) Flash point ≥ 140°F and < 200°F
4.1 Flammable Solid Table 2 1,001 lbs or more aggregate FLAMMABLE SOLID Readily combustible solids and matches
4.2 Spontaneously Combustible Table 2 1,001 lbs or more aggregate SPONTANEOUSLY COMBUSTIBLE Pyrophoric and self-heating materials
5.1 Oxidizer Table 2 1,001 lbs or more aggregate OXIDIZER Promotes combustion of organic matter
5.2 Organic Peroxide (Standard) Table 2 1,001 lbs or more aggregate ORGANIC PEROXIDE Non-temperature-controlled organic peroxides
6.1 Toxic (Ingestion/Dermal/Zone C/D) Table 2 1,001 lbs or more aggregate POISON Non-inhalation toxic materials
8 Corrosive Table 2 1,001 lbs or more aggregate CORROSIVE Skin destruction / metal destruction
9 Miscellaneous Hazardous Table 2 Exempt for Highway CLASS 9 (Optional) Placards not required on domestic highways