Study guide

2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification

Virginia CDL Hazardous Materials Endorsement Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Intent of the Regulations and Transportation Roles

1.1 The Intent of the Hazmat Regulations and Who Enforces Them 1.2 Shipper, Carrier, and Driver: Who Does What

2 Chapter 2: Shipping Papers, Descriptions, and Emergency Information

2.1 Required Shipping Paper Elements and the Basic Description Sequence 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification 2.3 The 24-Hour Emergency Response Telephone Number 2.4 Emergency Response Information: Content, Format, and Cab Placement

3 Chapter 3: Shipping Paper Accessibility, Retention, and Package Markings

3.1 Where Shipping Papers Must Be Kept 3.2 Shipping Paper and Waste Manifest Retention 3.3 Package Markings on Non-Bulk Packages 3.4 Hazard Warning Labels and How They Differ from Placards

4 Chapter 4: Placarding — Tables, Thresholds, Placement, and the DANGEROUS Placard

4.1 Placard Table 1: The Any-Quantity Materials 4.2 Placard Table 2 and the 1,001-Pound Aggregate Rule 4.3 Placard Placement, Display Standards, and Bulk Identification Numbers 4.4 The DANGEROUS Placard and Placard Removal Rules

5 Chapter 5: Hazard Classes and the Hazardous Materials Table

5.1 Hazard Classes 1 through 4: Explosives, Gases, Flammable Liquids, and Flammable Solids 5.2 Hazard Classes 5 through 9: Oxidizers, Poisons, Radioactive Materials, Corrosives, and Class 9 5.3 The Hazardous Materials Table: Columns 1 through 5 5.4 The Hazardous Materials Table: Columns 6 through 10 and Looking Up a Material

6 Chapter 6: Packing Groups, Packaging Performance, and Subsidiary Hazards

6.1 Packing Groups and UN Performance Packaging Marks 6.2 Subsidiary Hazards, Precedence of Hazard, and Dual Placarding

7 Chapter 7: Loading, Securement, and Segregation

7.1 General Loading Rules, Cargo Refusal, and Securement 7.2 Class-Specific Loading Precautions and Compressed Gas Cylinders 7.3 Reading the Segregation Table: X, O, Blank, and Asterisk 7.4 Incompatible Materials, the Do-Not-Load Table, and Foodstuffs

8 Chapter 8: Bulk Packaging, Markings, and Cargo Tank Operations

8.1 What Counts as Bulk Packaging and How to Recognize Cargo Tank Specifications 8.2 Bulk Package Markings and Identification Number Displays 8.3 Liquid Surge, Outage, Transfer Attendance, and Static Bonding

9 Chapter 9: Driving, Parking, Attendance, and Routing Rules

9.1 Defensive Driving with a Hazardous Load and Railroad Grade Crossings 9.2 En-Route Tire Inspections and Overheated Tire Procedures 9.3 Parking Rules for Explosives and Other Placarded Loads 9.4 Attendance, Safe Havens, and Smoking Restrictions 9.5 Route Restrictions, Written Route Plans, and Required Documents

10 Chapter 10: Security Awareness and Risk Management

10.1 HazMat Security Plans and Security Training 10.2 Driver Security Practices, Cargo Seals, and En-Route Threat Response

11 Chapter 11: Emergency Response and Scene Management

11.1 Initial Response Priorities, Scene Isolation, and Safe Positioning 11.2 Using the Emergency Response Guidebook 11.3 Spills, Leaks, and Class-Specific Emergency Responses

12 Chapter 12: Fires, Firefighting Limits, and Incident Reporting

12.1 Fire Extinguishers and When a Driver May Fight a Fire 12.2 Explosives Fires, Tire Fires, and Evacuation 12.3 Immediate Telephonic Notification and Emergency Contacts 12.4 Written Incident Reports and Record Retention

13 Chapter 13: Virginia HME Licensing, Testing, and Federal Security Screening

13.1 Virginia HME Eligibility, Documents, and Testing Rules 13.2 Entry-Level Driver Training and the Path to the Endorsement 13.3 The TSA Security Threat Assessment and Disqualifying Offenses 13.4 Virginia HME Fees, TWIC Comparability, Renewal, and Appeals

14 Chapter 14: Virginia Tunnel, Bridge-Tunnel, and Routing Restrictions

14.1 Virginia's Six State-Owned Bridge-Tunnel Facilities and the Rural Tunnels 14.2 Urban Tunnel Restrictions: Prohibited, Restricted, and Unrestricted Classes 14.3 The Chesapeake Bay Bridge-Tunnel, the Roanoke Airport Tunnel, and Planning a Virginia Route

2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification

Key Takeaways Explain This Topic AI

The letters "RQ" must be entered immediately before or immediately after the basic description when a package holds a reportable quantity of a hazardous substance.

The word "WASTE" must precede the proper shipping name of a hazardous waste unless the word is already part of the name in the Hazardous Materials Table.

Generic and n.o.s. entries flagged with "G" in Column 1 of the Hazardous Materials Table require the technical name of the hazardous constituent in parentheses.

The shipper signs a certification on the original shipping paper; a driver may accept that certification unless the package is clearly unsafe or non-compliant.

Shippers keep shipping papers 2 years and carriers keep them 1 year; hazardous waste paperwork is kept 3 years by both.

Last updated: September 2026

  • 2.2 Reportable Quantities, WASTE, Technical Names, and the Shipper's Certification
  • Additional Required Elements on Shipping Papers

Beyond the four-part basic description, federal and state regulations mandate several critical document notations:

Total Quantity and Packaging Types

The shipping paper must specify the number and type of packages (e.g., "12 drums" , "4 cylinders" , "1 cargo tank" , "2 intermediate bulk containers (IBCs)" ).

It must indicate the total net or gross quantity by volume or mass (e.g., "500 gal" , "2,400 lbs" , "1,500 kg" ).

Reportable Quantity ("RQ")

Under federal environmental statutes (CERCLA) and 49 CFR 172.101 Appendix A (List of Hazardous Substances and Reportable Quantities) , hazardous substances are assigned a specific discharge threshold known as a Reportable Quantity.

If a single commercial package contains an amount of a listed hazardous substance that equals or exceeds its assigned RQ threshold, the letters "RQ" must be displayed on the shipping paper.

Permissible Placement : The letters "RQ" must be entered either immediately before or immediately after the basic description.

  • Example A : RQ, UN1090, Acetone, 3, PG II
  • Example B : UN1090, Acetone, 3, PG II, RQ

If an accidental discharge of an RQ package occurs, the motor carrier must immediately notify the federal National Response Center (NRC).

EPA Hazardous Waste and the Uniform Manifest

Hazardous wastes regulated under EPA rules ( 40 CFR Part 262 ) must be accompanied by an EPA Form 8700-22 Uniform Hazardous Waste Manifest .

The word "WASTE" must precede the proper shipping name in the basic description unless the word waste is already included in the official HMT name.

Example : UN1170, WASTE Ethanol, 3, PG II

The manifest tracks the waste from the initial generator (shipper), through every commercial transporter (drivers/carriers), to the designated Treatment, Storage, and Disposal Facility (TSDF). Each party must sign and date the manifest upon transferring custody.

Technical Names for Generic and N.O.S. Descriptions

Many chemicals are shipped under generic or "Not Otherwise Specified" (n.o.s.) proper shipping names (e.g., Flammable liquids, n.o.s. or Corrosive liquids, n.o.s. ).

When Column 1 of the Hazardous Materials Table displays the letter "G" , the shipper must identify the specific recognized chemical or technical name of the hazard-causing constituent in parentheses immediately following or adjacent to the proper shipping name ( 49 CFR 172.203(k) ).

  • Example : UN1993, Flammable liquids, n.o.s. (contains Toluene and Methanol), 3, PG II
  • Toxic Inhalation Hazard (TIH) / Poison Inhalation Hazard (PIH)

Materials that present severe inhalation risks must be explicitly designated with the words "Toxic Inhalation Hazard" or "Inhalation Hazard" , accompanied by the assigned Hazard Zone ( Zone A, Zone B, Zone C, or Zone D ).

Example : UN1052, Hydrogen fluoride, anhydrous, 8 (6.1), PG I, Hazard Zone C, Toxic Inhalation Hazard

Even when transported in small quantities, TIH Zone A and Zone B materials trigger special placarding and routing mandates.

Shipper's Certification Statement

Every shipping paper originating from a non-bulk offeror must include a signed certification certifying that the materials are prepared in strict compliance with federal law ( 49 CFR 172.204 ).

Standard authorized wording: "This is to certify that the above-named materials are properly classified, described, packaged, marked, and labeled, and are in proper condition for transportation according to the applicable regulations of the Department of Transportation."

Must be signed manually or electronically by the shipper's authorized representative. A shipping paper missing this certification is legally invalid, and drivers must refuse to accept the cargo.

Comparison Table: Compliant vs. Non-Compliant Shipping Descriptions

Entry Description Regulatory Status Detailed Violation Analysis & Regulatory Correction

UN1203, Gasoline, 3, PG II, 10 drums, 4,500 lbs COMPLIANT Follows strict ISHP sequence. Quantity and container count follow after the packing group.

Gasoline, UN1203, Class 3, PG II NON-COMPLIANT Out-of-Order Sequence : Uses outdated pre-2013 format. Identification number must appear first under 49 CFR 172.202.

UN1203, 500 Gal Gasoline, 3, PG II NON-COMPLIANT Interspersed Extraneous Information : Quantity inserted between UN number and shipping name, violating 49 CFR 172.202(b).

UN1993, Flammable Liquid, 3, PG II NON-COMPLIANT Invalid Proper Shipping Name : Column 2 specifies Flammable liquids, n.o.s. and requires a technical chemical name in parentheses.

RQ, UN1760, Corrosive liquids, n.o.s. (contains Caprylyl chloride), 8, PG II COMPLIANT Proper placement of "RQ" prefix, correct ISHP sequence, and valid technical name in parentheses.

UN1830, Sulfuric Acid, Class 8 NON-COMPLIANT Omitted Packing Group : Sulfuric acid is assigned PG II in the HMT, which must be displayed in Roman numerals.

UN1090, Acetone, 3, PG II, RQ COMPLIANT "RQ" correctly placed immediately after the basic description sequence.

UN1017, Chlorine, 2.3, PG II, Poison Inhalation Hazard, Zone B NON-COMPLIANT Packing Group Assigned to a Gas : Class 2 gases are not assigned packing groups, so PG II must not appear. The correct entry is UN1017, Chlorine, 2.3, Poison Inhalation Hazard, Zone B .

Commercial Driving Scenario: Roadside Inspection on I-95 in Virginia

Roadside Case Study :

A commercial driver operating a dry van is pulled into the Virginia State Police Motor Carrier Safety Inspection facility on Interstate 95 near Carson, Virginia, for a CVSA Level II driver and documentation inspection.

The driver presents the bill of lading to the State Police Trooper. The manifest lists ten 55-gallon drums of industrial paint solvent formatted as follows: "5,000 lbs, Flammable Liquid, UN1993, Class 3, PG II, Paint Solvent"

The inspecting trooper informs the driver that the shipping paper contains multiple serious regulatory violations:

The basic description violates the mandatory ISHP sequence by placing quantity and shipping name ahead of the UN number.

The proper shipping name "Flammable Liquid" is invalid because the official HMT name is "Flammable liquids, n.o.s."

The generic description lacks the mandatory chemical constituent technical name in parentheses (e.g., contains Xylene and Toluene ).

The trooper issues a formal safety violation citation to the motor carrier and places the driver out of service until a corrected, compliant shipping paper is transmitted and certified by the shipper.

  • Common Exam Traps & Pitfalls
  • Trap: The Legacy "SHPI" Sequence

The Exam Trick : An exam question presents an answer choice with the Proper Shipping Name first (e.g., "Gasoline, 3, UN1203, PG II" ) and claims it is acceptable.

The Legal Reality : Years ago, federal regulations permitted the shipping name first. However, federal law amended 49 CFR 172.202 to mandate the international ISHP sequence (Identification Number first). Any test option showing the name or class ahead of the UN/NA number is incorrect.

Trap: Reportable Quantity Placement Rules

The Exam Trick : A question asserts that "RQ" can be placed anywhere on the shipping paper, such as in the special handling remarks at the bottom of the page.

The Legal Reality : Under 49 CFR 172.203(c) , the letters "RQ" must appear immediately before or immediately after the basic description. Stashing "RQ" in a distant comments box is a regulatory violation.

Trap: Using Trade Names as Proper Shipping Names

The Exam Trick : A scenario describes shipping "Super Solvent Cleaner #4" or "Bleach-All".

The Legal Reality : Commercial brand names and trademarks cannot substitute for official proper shipping names from Column 2 of the Hazardous Materials Table.