Study guide
Accounting Systems, Cash vs. Accrual Basis, and Financial Statements
Virginia Contractor Business Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Virginia Licensing Laws & Board for Contractors Regulations
Virginia DPOR & Board for Contractors Structure Contractor License Classes & Monetary Thresholds License Eligibility, Designated Employees, Qualified Individuals & Pre-Licensing Education License Maintenance, Renewal, Reinstatement, and Prohibited Acts / Disciplinary Sanctions
2 Chapter 2: Virginia-Specific Regulations & Consumer Protections
2.1 Virginia Contractor Transaction Recovery Fund & Claim Eligibility 2.2 Virginia Uniform Statewide Building Code (USBC) & Local Permitting Requirements 2.3 Virginia Erosion and Sediment Control Regulations & Environmental Compliance
3 Chapter 3: Construction Contracts & Risk Management
3.1 Essential Elements of Construction Contracts & Required VA Provisions 3.2 Change Orders, Breach of Contract, and Dispute Resolution Mechanisms 3.3 Construction Insurance & Surety Bonds
4 Chapter 4: Virginia Mechanics Lien Law
Fundamentals of Virginia Mechanics Liens & Statutory Deadlines Notice of Intent to Claim Lien & Memorandum of Lien Filing Procedures Lien Waivers, Priority of Liens, and Lien Foreclosure Actions
5 Chapter 5: Estimating, Bidding & Financial Management
Estimating Methods, Quantity Takeoffs, and Overhead Calculation Bidding Procedures, Bid Preparation, and Markup Strategies Accounting Systems, Cash vs. Accrual Basis, and Financial Statements Payroll Taxes, Business Tax Obligations, and Financial Ratio Analysis
6 Chapter 6: Project Management & Site Operations
6.1 Project Scheduling Methods (CPM, Gantt Charts) and Progress Tracking 6.2 Material Management, Subcontractor Coordination, and Quality Control 6.3 Site Logistics, Project Closeout, Punch Lists, and Warranties
7 Chapter 7: OSHA Safety & Worker Protection Standards
OSHA Regulations, Employers' General Duty Clause & Inspection Procedures Construction Hazard Prevention (Fall Protection, Excavation, Scaffolding, HazCom) Virginia Workers' Compensation Act & Workplace Injury Reporting
8 Chapter 8: Employment Law & Business Ethics
8.1 Federal & Virginia Labor Laws (FLSA, Davis-Bacon, Equal Opportunity) 8.2 Employee Classification vs. Independent Contractor Status 8.3 Business Ethics, Environmental Compliance, and Fair Business Practices
Accounting Systems, Cash vs. Accrual Basis, and Financial Statements
Key Takeaways Explain This Topic AI
Cash accounting recognizes revenue when cash is received and expenses when cash is disbursed, whereas accrual accounting matches revenue to when earned and expenses to when incurred.
The Percentage of Completion (POC) method is mandatory for long-term contracts under GAAP, recognizing revenue based on the cost-to-cost ratio: Percent Complete = Costs Incurred to Date / Total Estimated Cost.
The Balance Sheet follows the fundamental accounting equation (Assets = Liabilities + Owner's Equity) and displays short-term liquidity through current assets and current liabilities.
Working capital is calculated as Working Capital = Current Assets - Current Liabilities, serving as the primary metric for evaluating a contractor's short-term financial health and bonding capacity.
Last updated: July 2026
Accounting Systems, Cash vs. Accrual Basis, and Financial Statements
Financial management in construction requires specialized accounting methods due to the long-duration, high-capital, and project-specific nature of contracting work. Standard business accounting often fails to capture the true financial status of a construction business actively executing long-term multi-period contracts. Contractors must understand fundamental accounting methods, revenue recognition standards, financial statement analysis, and working capital management.
Construction Accounting Methods: Cash, Accrual & Percentage of Completion
Contractors utilize three primary revenue recognition accounting systems:
1. Cash Basis Accounting
Mechanism: Revenue is recognized strictly when cash or checks are received in the bank; expenses are recognized strictly when cash disbursements are paid out.
Advantages: Simple to operate; provides clear tracking of physical bank balances; offers tax flexibility by deferring income deposits or accelerating year-end bill payments.
Disadvantages: Distorts true financial health on long-term projects. A contractor could appear highly profitable in Month 1 due to a large mobilization advance, despite having incurred zero direct construction expenses to earn that cash.
2. Accrual Basis Accounting
Mechanism: Revenue is recognized when earned (when progress invoices/billings are issued), regardless of when cash is collected. Expenses are recognized when incurred (when vendor invoices or subcontractor pay apps are approved), matching revenue to related expenses.
Key Accounts: Introduces Accounts Receivable (billed revenues pending collection) and Accounts Payable (incurred obligations pending payment).
Advantage: Conforms to the financial matching principle , offering a more realistic view of periodic operational performance than cash accounting.
3. Percentage of Completion (POC) Method
Mechanism: The mandatory revenue recognition standard under Generally Accepted Accounting Principles (GAAP) for long-term construction contracts spanning multiple tax or accounting periods. Revenue, expenses, and gross profit are recognized progressively based on the percentage of physical work completed.
Cost-to-Cost Formula: Physical progress is calculated by comparing actual costs incurred to total estimated project costs: Percent Complete = ( Contract Costs Incurred to Date Total Estimated Total Contract Costs ) × 100 \text{Percent Complete} = \left( \frac{\text{Contract Costs Incurred to Date}}{\text{Total Estimated Total Contract Costs}} \right) \times 100 Percent Complete = ( Total Estimated Total Contract Costs Contract Costs Incurred to Date ) × 100 Earned Revenue to Date = Percent Complete × Total Revised Contract Value \text{Earned Revenue to Date} = \text{Percent Complete} \times \text{Total Revised Contract Value} Earned Revenue to Date = Percent Complete × Total Revised Contract Value Earned Gross Profit to Date = Earned Revenue to Date − Contract Costs Incurred to Date \text{Earned Gross Profit to Date} = \text{Earned Revenue to Date} - \text{Contract Costs Incurred to Date} Earned Gross Profit to Date = Earned Revenue to Date − Contract Costs Incurred to Date
Overbillings vs. Underbillings on the Balance Sheet
Because actual project billings rarely equal exact earned revenue calculated under Percentage of Completion, contractors must adjust their balance sheets using two specialized accounting accounts:
Underbillings (Asset): Billings in Excess of Costs and Estimated Earnings. Occurs when Earned Revenue exceeds Actual Total Billings. Represents work performed by the contractor that has not yet been invoiced. Categorized as a Current Asset .
Overbillings (Liability): Costs and Estimated Earnings in Excess of Billings. Occurs when Actual Total Billings exceed Earned Revenue. Represents cash collected for work that has not yet been performed on site. Categorized as a Current Liability .
The Balance Sheet: Structure & Core Components
A Balance Sheet provides a financial snapshot of a contractor's assets, liabilities, and owner's equity at a single specific point in time (e.g., December 31). It is governed by the fundamental accounting equation: Assets = Liabilities + Owner’s Equity \text{Assets} = \text{Liabilities} + \text{Owner's Equity} Assets = Liabilities + Owner’s Equity
Structure of Balance Sheet Assets
Current Assets: Assets expected to be converted into cash, sold, or consumed within 12 months (or one operating cycle):
Cash and cash equivalents.
Accounts receivable and retainage receivable due within one year.
Costs and estimated earnings in excess of billings (Underbillings).
Construction materials inventory and prepaid expenses.
Non-Current / Fixed Assets: Long-term physical assets used in operations:
Heavy machinery, excavators, vehicles, trucks, and office buildings.
Less: Accumulated Depreciation (the cumulative historical write-off of asset value).
Structure of Balance Sheet Liabilities & Equity
Current Liabilities: Financial obligations due for settlement within 12 months:
Accounts payable to material suppliers and subcontractors.
Retainage payable withheld from subcontractors.
Billings in excess of costs and estimated earnings (Overbillings).
Accrued payroll taxes (FICA, FUTA, SUTA) and short-term debt.
Long-Term Liabilities: Obligations maturing beyond 12 months (e.g., multi-year equipment mortgages, bank term loans).
Owner's Equity: The net net worth of the company belonging to shareholders or sole proprietors ( Equity = Assets − Liabilities \text{Equity} = \text{Assets} - \text{Liabilities} Equity = Assets − Liabilities ). Consists of capital contributions, paid-in capital, and cumulative Retained Earnings .
The Income Statement & Working Capital Analysis
While the balance sheet is a static snapshot, the Income Statement (Profit and Loss Statement) measures financial performance over a defined operating period (e.g., quarterly or annually).
Structure of the Income Statement Gross Revenues (Contract Sales) − Cost of Goods Sold (Direct Job Costs) = Gross Profit \text{Gross Revenues (Contract Sales)} - \text{Cost of Goods Sold (Direct Job Costs)} = \text{Gross Profit} Gross Revenues (Contract Sales) − Cost of Goods Sold (Direct Job Costs) = Gross Profit Gross Profit − Operating Expenses (General Office Overhead) = Operating Income (EBIT) \text{Gross Profit} - \text{Operating Expenses (General Office Overhead)} = \text{Operating Income (EBIT)} Gross Profit − Operating Expenses (General Office Overhead) = Operating Income (EBIT) Operating Income ± Other Income/Expenses − Income Taxes = Net Income \text{Operating Income} \pm \text{Other Income/Expenses} - \text{Income Taxes} = \text{Net Income} Operating Income ± Other Income/Expenses − Income Taxes = Net Income
Working Capital & Surety Bonding Capacity
Working Capital represents the liquid net capital available to fund day-to-day job site operations, purchase materials, and meet payroll obligations before customer progress payments are collected: Working Capital = Current Assets − Current Liabilities \text{Working Capital} = \text{Current Assets} - \text{Current Liabilities} Working Capital = Current Assets − Current Liabilities
Surety bonding companies evaluate a contractor's net working capital as the single primary benchmark when establishing maximum bonding capacity limits. As a general industry rule of thumb, sureties establish maximum single project bonding limits at 10 to 20 times the contractor's net working capital.
Summary of Accounting Methods & Balance Sheet Accounts
- Accounting Element Definition / Formula Balance Sheet / Financial Statement Category
- Cash Basis Revenue recognized upon cash receipt Simple cash tracking; distorts multi-period matching
- Accrual Basis Revenue recognized when progress billed Standard matching principle; introduces AR and AP
Percentage of Completion Costs Incurred / Total Estimated Cost Mandatory under GAAP for long-term construction contracts
- Underbillings Account Earned Revenue > Invoiced Billings Classified as a Current Asset on Balance Sheet
- Overbillings Account Invoiced Billings > Earned Revenue Classified as a Current Liability on Balance Sheet
Working Capital Formula Current Assets - Current Liabilities Key benchmark for credit, liquidity, and bonding capacity