Study guide
6.2 Public Notification, Consumer Confidence Reports & Customer Complaints
Virginia Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Virginia Licensing, Regulations & Administrative Standards
1.1 Virginia DPOR Board Structure, License Categories & Scope of Practice 1.2 Experience, Education, Substitutions & Examination Approval 1.3 Renewal, Reinstatement, CPE Requirements & Discipline 1.4 Virginia Drinking Water & Wastewater Environmental Governance 1.5 Facility Classification & Minimum Operator Attendance 1.6 The ABC/WPI Exam Blueprint, References & Test-Day Rules 1.7 License Maintenance, Reporting Duties & Professional Conduct
2 Chapter 2: Source Water & Drinking Water Treatment Unit Processes
2.1 Source Water Hydrology, Groundwater Protection & Raw Water Quality 2.2 Coagulation, Flocculation & Sedimentation Processes 2.3 Filtration Technologies & Media Management 2.4 Disinfection Chemistry, CT Calculations & Disinfection Byproducts 2.5 Corrosion Control, Softening & Fluoridation Chemistry 2.6 Pretreatment: Screening, Presedimentation, Aeration & Preoxidation 2.7 Filter Backwash, Surface Wash, Air Scour & Filter Surveillance 2.8 Membrane Systems: MF, UF, NF and RO Operation & Integrity Testing 2.9 Water Treatment Residuals: Handling, Thickening & Disposal 2.10 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 2.11 Process Monitoring, Trend Interpretation & Plant Optimization 2.12 Iron and Manganese, Taste-and-Odor Control, GAC & PFAS
3 Chapter 3: Wastewater Treatment, Biological Processes & Biosolids
3.1 Preliminary Treatment & Primary Clarification 3.2 Activated Sludge Dynamics & Secondary Process Control 3.3 Attached Growth Systems & Advanced Biological Processes 3.4 Biological & Chemical Nutrient Removal (BNR/ENR) 3.5 Solids Thickening, Digestion & Biosolids Management 3.6 Wastewater Characteristics, Influent Loading & Industrial Pretreatment 3.7 Secondary Clarifier Operation & Sludge Blanket Control 3.8 Lagoons, Stabilization Ponds & Natural Treatment Systems 3.9 Tertiary Filtration, Effluent Polishing & Water Reuse 3.10 Wastewater Disinfection & Dechlorination Systems 3.11 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 3.12 Digester Gas Handling, Cogeneration & Gas System Safety 3.13 Biosolids Land Application, Part 503 & Virginia Permitting
4 Chapter 4: Distribution Networks, Collection Systems & Hydraulic Systems
4.1 Water Distribution Networks, Storage & Pressure Management 4.2 Cross-Connection Control & Backflow Prevention Assemblies 4.3 Wastewater Collection Systems, Lift Stations & Inflow/Infiltration 4.4 Centrifugal & Positive Displacement Pumps 4.5 Motors, Drives, Control Systems & SCADA 4.6 Storage Tank Inspection, Meters, Services & Distribution Appurtenances 4.7 Main Disinfection, Flushing & Distribution Water Quality Management 4.8 Sewer Cleaning, CCTV Inspection & Collection System Rehabilitation 4.9 Maintenance Programs, Asset Management & Pump Efficiency Testing 4.10 Odor Control, Standby Power & Ancillary Plant Equipment
5 Chapter 5: Laboratory Analysis, Environmental Safety & Applied Math
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols 5.2 Confined Space Entry, Chemical Safety & OSHA/VOSH Compliance 5.3 Hydraulic, Dosage & Pounds Formula Math 5.4 Wastewater Process & Loading Rate Mathematics 5.5 Drinking Water Microbiology & the Revised Total Coliform Rule 5.6 Wastewater Laboratory Analysis: Nutrients, Metals, WET & Regulatory Testing 5.7 Instrument Calibration, Online Analyzers & Data Validation 5.8 Process Control Testing: Jar Tests, Settleometer & Microscopic Examination 5.9 Chemical Receiving, Storage, Spill Response & Hazardous Waste 5.10 Electrical Safety, Fall Protection, Excavation & Traffic Control 5.11 PPE, Respiratory Protection & Biological Hazards 5.12 Advanced Applied Math: Mass Balance, Blending & Efficiency
6 Chapter 6: Regulatory Compliance, Reporting & Plant Administration
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations 6.2 Public Notification, Consumer Confidence Reports & Customer Complaints 6.3 VPDES Permit Compliance, DMRs & Overflow Reporting 6.4 Operating Records, Logbooks, Reports & Data Integrity 6.5 Emergency Response Planning & AWIA Risk and Resilience 6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment 6.7 Budgeting, Procurement, Inventory & Capital Planning 6.8 Supervision, Training, SOP Development & Resource Optimization
6.2 Public Notification, Consumer Confidence Reports & Customer Complaints
Key Takeaways Explain This Topic AI
Tier 1 public notice is required within 24 hours for acute violations, Tier 2 within 30 days for other maximum contaminant level and treatment technique violations, and Tier 3 within one year for monitoring and reporting violations.
Every public notice must contain ten required elements including a description of the violation, potential health effects in mandatory language, the population at risk, and what the system is doing to correct it.
A boil water advisory is rescinded only after the cause is corrected, adequate pressure and disinfectant residual are restored, and bacteriological samples confirm the water is safe.
Community water systems must deliver a Consumer Confidence Report to each customer by July 1 each year covering the prior calendar year.
A customer complaint investigation should record the exact location, time, description, and whether the problem is at one tap, one building, or a whole area, because that pattern points directly at premise plumbing versus a distribution problem.
Last updated: August 2026
Public Notification, Consumer Confidence Reports & Customer Complaints
The ABC Water Treatment outline lists "notify the public according to regulatory requirements" and "respond to consumer complaints" as separate job tasks in the Security, Safety, and Administrative Procedures area, and the wastewater outline lists "respond to customer service requests and complaints." Both are application-level content.
1. The Public Notification Rule
Every public water system must notify its customers of certain violations and situations. The rule assigns each event to one of three tiers based on the seriousness of the potential health effect.
Tier 1 Tier 2 Tier 3
Trigger Violations with the potential for serious adverse health effects from short-term exposure Other MCL, MRDL, and treatment technique violations Monitoring and reporting violations; operation under a variance or exemption
Deadline As soon as practical, within 24 hours Within 30 days Within 1 year
Delivery Media that reaches the affected population as quickly as possible - radio, television, hand delivery, posting, phone or reverse-911, door hangers Mail or direct delivery, plus another method if needed Mail or direct delivery; may be included in the CCR if it is issued within the deadline
- Repeat As directed by the state Every 3 months while the violation persists Annually while it persists
- What is a Tier 1 event
- Confirmed E. coli MCL violation or failure to test after an E. coli positive
- Nitrate, nitrite, or total nitrate/nitrite MCL exceedance - a single confirmed sample
- Exceeding the chlorine dioxide MRDL at the entry point when the distribution follow-up samples also exceed
- Waterborne disease outbreak or other waterborne emergency
- Detection of turbidity above 5 NTU where the state determines a Tier 1 notice is needed
- Failure to maintain a treatment technique where the state determines acute risk
- Occurrence of a significant deficiency or contamination where the state determines Tier 1 is warranted
The system must also contact the state within 24 hours of learning of the Tier 1 violation and consult on the notice language and additional actions.
- The ten required elements of every notice
- A description of the violation or situation, including the contaminant;
- When it occurred ;
Potential health effects , using the mandatory standard language from the rule's appendix - this language may not be paraphrased;
- The population at risk and whether alternate water should be used;
- What the system is doing to correct it;
- When the system expects to return to compliance;
- Contact name, business address, and phone number ;
The standard language encouraging distribution to other persons served (multi-unit buildings, businesses, schools);
Multilingual requirements where a large proportion of the population is non-English speaking;
No language that minimizes or contradicts the required health effects language.
2. Boil Water Advisories
A boil water advisory is issued when water may be microbiologically unsafe - after a loss of pressure event, a positive E. coli result, a treatment failure, a main break with confirmed contamination, or as a precaution during a distribution emergency.
The advisory instruction is to bring water to a rolling boil for one minute (three minutes at elevations above about 6,500 feet) before drinking, brushing teeth, making ice, washing produce, or preparing food.
Rescinding an advisory
Rescission is not an operator's judgment call; it follows a defined sequence with state concurrence:
The cause has been identified and corrected.
Adequate positive pressure has been restored and maintained throughout the affected area.
The system has been flushed and an adequate disinfectant residual has been re-established throughout.
Bacteriological samples collected from representative points in the affected area are absent for total coliform and E. coli - typically two consecutive sets 24 hours apart.
The state concurs with rescission.
The rescission notice is delivered by the same means as the advisory , which is the step most often done poorly - customers who never hear the rescission keep boiling for months and lose confidence in the utility.
Have the templates written before you need them. A Tier 1 notice must go out within 24 hours; that is not the moment to draft language, look up the mandatory health-effects text, and locate the media contact list.
3. The Consumer Confidence Report
Every community water system must deliver an annual water quality report - the Consumer Confidence Report (CCR) - to each customer.
- Requirement Detail
- Deadline July 1 each year, covering the previous calendar year
- Who Community water systems only (not NTNC or TNC)
Delivery Mail or direct delivery; systems serving fewer than 10,000 may use alternate methods with state approval; electronic delivery is permitted under conditions
Certification The system must certify to the state, within 3 months of delivery, that the report was distributed and the information is correct
- Retention Keep for 5 years
- Required content
- The source(s) of water and, where available, a summary of the source water assessment ;
- Definitions of MCL, MCLG, treatment technique, action level, and any units used;
A table of all detected regulated contaminants with the MCL, MCLG, the level detected (highest and range), the likely source, and whether the MCL was exceeded;
- Lead-specific language - an explanation of lead in drinking water and steps consumers can take;
- Information on Cryptosporidium , radon, and other contaminants where detected or monitored;
- Any violations during the year, with an explanation and corrective action, including monitoring violations;
- Required health-effects language for any MCL violation;
- Vulnerable population language about immunocompromised persons;
- Contact information and how to participate in decisions affecting water quality;
Multilingual requirements where applicable.
The CCR is often the only document a utility sends its customers all year that is not a bill. Operators are usually the source of the data in it, and an error in the table is a CCR violation.
4. Handling Customer Complaints
The ABC criteria treat complaint response as a job task because complaints are distributed water quality data collected for free . They arrive faster than sampling results and they are geographically specific.
The intake record
Every complaint should capture, at minimum:
- Exact address and, if possible, which tap;
- Date and time the problem was noticed and whether it is continuous or intermittent;
- Hot water, cold water, or both - a hot-water-only problem is almost always the water heater;
- First draw or after running - a first-draw-only problem is premise plumbing;
One fixture, whole house, or neighbors too - this single question separates a premise problem from a distribution problem;
Description in the customer's words, and whether any health complaint is involved.
Diagnostic table
Complaint Likely causes First checks
Red or brown water Iron - corrosion of unlined cast iron, hydrant use, main break, flow reversal disturbing tuberculation; or well iron Was there hydrant use, a break, or a valve operation nearby? Flush and observe. Check whether it clears
Black water / black particles Manganese deposits released by a flow change; or a degraded rubber gasket or hose washer Manganese at the entry point; recent flow disturbance; ask whether particles are gritty (Mn) or rubbery (gasket)
Milky / cloudy water that clears from the bottom up Entrained air , not a contaminant Fill a glass and watch. Clearing bottom-up is air; clearing top-down or not at all is particulate
Blue-green staining Copper corrosion in premise plumbing pH, alkalinity, and corrosion control status; new copper plumbing is a common cause
Rotten egg odor, cold water Hydrogen sulfide in the source Source sulfide; sampling at the entry point
Rotten egg odor, hot water only Sulfate-reducing bacteria on the water heater anode rod It is a premise issue; advise flushing and anode replacement
Chlorine or bleach taste High residual, or chlorophenol formation from chlorine and a phenolic material Residual measurement; recent flushing or dose change
Earthy or musty taste Geosmin or MIB from source algae Source condition; PAC or carbon status
Petroleum or solvent odor Potential contamination or a permeated plastic service line - treat as urgent Investigate immediately; do not dismiss. Plastic service lines can permeate from a fuel spill in the soil
Gasoline odor at one house only Permeation or a plumbing cross-connection Same - urgent, on-site
Low pressure Partially closed valve, main break, hydrant open, PRV failure, plugged premise strainer, or a clogged aerator Check pressure at the meter versus inside
The rules that make complaint handling useful
Log every complaint , including the ones that resolve themselves. The pattern is worth more than any single call.
Map them. Three red-water calls on the same street in a week is a main condition, not three coincidences.
Respond and close the loop. Tell the customer what you found. A complaint answered builds more confidence than a complaint that never happened.
Escalate anything suggesting contamination - petroleum or solvent odor, any illness cluster, any report of a cross-connection - immediately, and never explain it away over the phone.
Feed the data back into the flushing program, the valve exercising program, the unidirectional flushing sequence design, and the capital plan.