Study guide
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations
Virginia Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Virginia Licensing, Regulations & Administrative Standards
1.1 Virginia DPOR Board Structure, License Categories & Scope of Practice 1.2 Experience, Education, Substitutions & Examination Approval 1.3 Renewal, Reinstatement, CPE Requirements & Discipline 1.4 Virginia Drinking Water & Wastewater Environmental Governance 1.5 Facility Classification & Minimum Operator Attendance 1.6 The ABC/WPI Exam Blueprint, References & Test-Day Rules 1.7 License Maintenance, Reporting Duties & Professional Conduct
2 Chapter 2: Source Water & Drinking Water Treatment Unit Processes
2.1 Source Water Hydrology, Groundwater Protection & Raw Water Quality 2.2 Coagulation, Flocculation & Sedimentation Processes 2.3 Filtration Technologies & Media Management 2.4 Disinfection Chemistry, CT Calculations & Disinfection Byproducts 2.5 Corrosion Control, Softening & Fluoridation Chemistry 2.6 Pretreatment: Screening, Presedimentation, Aeration & Preoxidation 2.7 Filter Backwash, Surface Wash, Air Scour & Filter Surveillance 2.8 Membrane Systems: MF, UF, NF and RO Operation & Integrity Testing 2.9 Water Treatment Residuals: Handling, Thickening & Disposal 2.10 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 2.11 Process Monitoring, Trend Interpretation & Plant Optimization 2.12 Iron and Manganese, Taste-and-Odor Control, GAC & PFAS
3 Chapter 3: Wastewater Treatment, Biological Processes & Biosolids
3.1 Preliminary Treatment & Primary Clarification 3.2 Activated Sludge Dynamics & Secondary Process Control 3.3 Attached Growth Systems & Advanced Biological Processes 3.4 Biological & Chemical Nutrient Removal (BNR/ENR) 3.5 Solids Thickening, Digestion & Biosolids Management 3.6 Wastewater Characteristics, Influent Loading & Industrial Pretreatment 3.7 Secondary Clarifier Operation & Sludge Blanket Control 3.8 Lagoons, Stabilization Ponds & Natural Treatment Systems 3.9 Tertiary Filtration, Effluent Polishing & Water Reuse 3.10 Wastewater Disinfection & Dechlorination Systems 3.11 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 3.12 Digester Gas Handling, Cogeneration & Gas System Safety 3.13 Biosolids Land Application, Part 503 & Virginia Permitting
4 Chapter 4: Distribution Networks, Collection Systems & Hydraulic Systems
4.1 Water Distribution Networks, Storage & Pressure Management 4.2 Cross-Connection Control & Backflow Prevention Assemblies 4.3 Wastewater Collection Systems, Lift Stations & Inflow/Infiltration 4.4 Centrifugal & Positive Displacement Pumps 4.5 Motors, Drives, Control Systems & SCADA 4.6 Storage Tank Inspection, Meters, Services & Distribution Appurtenances 4.7 Main Disinfection, Flushing & Distribution Water Quality Management 4.8 Sewer Cleaning, CCTV Inspection & Collection System Rehabilitation 4.9 Maintenance Programs, Asset Management & Pump Efficiency Testing 4.10 Odor Control, Standby Power & Ancillary Plant Equipment
5 Chapter 5: Laboratory Analysis, Environmental Safety & Applied Math
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols 5.2 Confined Space Entry, Chemical Safety & OSHA/VOSH Compliance 5.3 Hydraulic, Dosage & Pounds Formula Math 5.4 Wastewater Process & Loading Rate Mathematics 5.5 Drinking Water Microbiology & the Revised Total Coliform Rule 5.6 Wastewater Laboratory Analysis: Nutrients, Metals, WET & Regulatory Testing 5.7 Instrument Calibration, Online Analyzers & Data Validation 5.8 Process Control Testing: Jar Tests, Settleometer & Microscopic Examination 5.9 Chemical Receiving, Storage, Spill Response & Hazardous Waste 5.10 Electrical Safety, Fall Protection, Excavation & Traffic Control 5.11 PPE, Respiratory Protection & Biological Hazards 5.12 Advanced Applied Math: Mass Balance, Blending & Efficiency
6 Chapter 6: Regulatory Compliance, Reporting & Plant Administration
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations 6.2 Public Notification, Consumer Confidence Reports & Customer Complaints 6.3 VPDES Permit Compliance, DMRs & Overflow Reporting 6.4 Operating Records, Logbooks, Reports & Data Integrity 6.5 Emergency Response Planning & AWIA Risk and Resilience 6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment 6.7 Budgeting, Procurement, Inventory & Capital Planning 6.8 Supervision, Training, SOP Development & Resource Optimization
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations
Key Takeaways Explain This Topic AI
A maximum contaminant level goal is a non-enforceable health target, while a maximum contaminant level is the enforceable standard set as close to the goal as feasible considering treatment capability and cost.
A treatment technique requirement replaces a numeric limit where a contaminant cannot be feasibly measured, and failure to meet it is a treatment technique violation rather than a maximum contaminant level violation.
Most chemical maximum contaminant levels are evaluated on a running annual average of quarterly results, while disinfection byproducts are evaluated on a locational running annual average at each monitoring site.
Violations fall into three families: maximum contaminant level or treatment technique violations, monitoring and reporting violations, and public notification and consumer confidence report violations.
A sanitary survey evaluates eight elements including source, treatment, distribution, finished water storage, pumps, monitoring and reporting, management and operations, and operator compliance, and identified significant deficiencies must be corrected on a schedule.
Last updated: August 2026
Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations
The ABC Water Treatment outline puts "determine if water quality violations have occurred," "ensure compliance with regulatory agency standards," and "notify the public according to regulatory requirements" in the Security, Safety, and Administrative Procedures area - which carries 14 of 100 items and is 11 of 14 application level . These are not definition questions; they are "here is a situation, what does the rule require" questions.
1. The Regulatory Structure
Congress passed the Safe Drinking Water Act in 1974, amended significantly in 1986 and 1996. EPA sets National Primary Drinking Water Regulations. Virginia holds primacy , meaning VDH's Office of Drinking Water enforces standards at least as stringent as the federal ones under the Waterworks Regulations, 12VAC5-590 .
Two kinds of standards
- Primary standards (NPDWRs) Secondary standards (NSDWRs)
- Basis Health Aesthetics - taste, odor, color, staining
- Enforceable? Yes No federally; states may adopt them
Examples Arsenic 0.010 mg/L, nitrate 10 mg/L, TTHM 0.080 mg/L, lead action level 0.015 mg/L Iron 0.3 mg/L, manganese 0.05 mg/L, TDS 500 mg/L, pH 6.5 to 8.5, chloride 250 mg/L, sulfate 250 mg/L
MCLG versus MCL versus treatment technique
Maximum Contaminant Level Goal (MCLG) - the level at which no known or anticipated adverse health effect occurs, with a margin of safety. Non-enforceable. MCLGs for known carcinogens and for pathogens are set at zero .
Maximum Contaminant Level (MCL) - the enforceable standard, set as close to the MCLG as feasible using the best available technology, taking cost into account. This is why the MCLG for lead is zero but the action level is 0.015 mg/L, and why the MCLG for TTHM is not zero for all species but the MCL is 0.080 mg/L.
Treatment technique (TT) - a required process, used where measuring the contaminant is not economically or technologically feasible. The Surface Water Treatment Rules, the Lead and Copper Rule, and the Revised Total Coliform Rule assessments are all treatment techniques.
Public water system categories
Type Definition
Community (CWS) At least 15 service connections used by year-round residents, or regularly serves at least 25 year-round residents
Non-transient non-community (NTNC) Regularly serves at least 25 of the same persons over 6 months per year - schools, factories, hospitals
Transient non-community (TNC) Serves at least 25 persons for at least 60 days per year, but not the same persons - campgrounds, rest areas, restaurants
Rule applicability follows the category: TNC systems are subject to the acute contaminants (nitrate, nitrite, coliform) but not to the full chemical suite or the Consumer Confidence Report requirement.
2. The Rule Families an Operator Must Recognize
Rule Governs
Surface Water Treatment Rule (SWTR), IESWTR, LT1, LT2ESWTR Filtration and disinfection of surface water and GWUDI; log removal/inactivation credit; filter turbidity; Cryptosporidium bin classification from source monitoring
Ground Water Rule Sanitary survey, triggered source water monitoring, corrective action, and 4-log virus treatment where required
- Revised Total Coliform Rule Distribution microbial integrity; assessments and corrective action
- Stage 1 and Stage 2 D/DBP Rules TTHM, HAA5, bromate, chlorite; maximum residual disinfectant levels
- Lead and Copper Rule / LCRR / LCRI Corrosion control, tap monitoring, service line inventory and replacement
Radionuclides Rule Gross alpha 15 pCi/L, combined radium-226/228 5 pCi/L, uranium 30 micrograms/L, beta/photon emitters 4 mrem/yr
Arsenic Rule 0.010 mg/L
Inorganic, VOC, and SOC rules Nitrate 10 mg/L, nitrite 1 mg/L, fluoride 4.0 mg/L, and the organic chemical suite
- PFAS NPDWR (2024) PFOA and PFOS at 4.0 ng/L; PFHxS, PFNA, HFPO-DA at 10 ng/L; Hazard Index of 1 for mixtures
- Consumer Confidence Report Rule Annual report to customers
- Public Notification Rule Tiered notice of violations
- Maximum Residual Disinfectant Levels
Often overlooked because they are limits on the disinfectant rather than a contaminant:
- Disinfectant MRDL MRDLG
- Chlorine 4.0 mg/L (as Cl2, annual average) 4 mg/L
- Chloramines 4.0 mg/L (as Cl2, annual average) 4 mg/L
- Chlorine dioxide 0.8 mg/L (daily, at the entry point) 0.8 mg/L
Exceeding an MRDL is a violation in the same way as exceeding an MCL.
- 3. Monitoring and Compliance Arithmetic
- Running annual average (RAA)
Most chemical MCLs are evaluated as the average of the four most recent quarterly samples . A single high quarter does not automatically violate - unless the result is so high that even with three zeros the average would exceed the MCL, in which case the violation is immediate.
Locational running annual average (LRAA)
Stage 2 D/DBPR changed the arithmetic in a way that matters enormously to operators. Under Stage 1, all sample sites were averaged together system-wide, so a low site could offset a high site. Under Stage 2, each monitoring location has its own running annual average , and any single location exceeding the MCL is a violation .
Worked example
A system has four Stage 2 sites. Quarterly TTHM results at Site 3 are 62, 78, 91, and 95 micrograms/L.
- LRAA at Site 3 = (62 + 78 + 91 + 95) / 4 = 81.5 micrograms/L
- MCL = 80 micrograms/L
Violation at Site 3 , regardless of what the other three sites did.
Acute versus non-acute
Acute MCLs - nitrate (10 mg/L as N), nitrite (1 mg/L as N), total nitrate plus nitrite (10 mg/L), and the E. coli MCL. A single confirmed sample violates, and the notice is Tier 1 .
Non-acute - averaged over time, Tier 2 notice.
Monitoring frequency and reduced monitoring
Frequency depends on the contaminant, the system size, the source type, and the system's history. Reduced monitoring (for example, moving from quarterly to annual, or annual to once per three years) is available for many contaminants after a demonstrated period of results well below the MCL, at the state's discretion. Reduced monitoring is a privilege that a single detection can revoke.
4. Violation Categories
Category Examples Typical notice
MCL / MRDL / TT violation Exceeding an MCL, failing to maintain required log inactivation, failing to conduct a required RTCR assessment, failing to install required corrosion control Tier 1 for acute, Tier 2 for others
Monitoring and reporting violation Failing to take a required sample, taking it late, failing to use an approved method or certified lab, failing to report a result on time Tier 3
Public notification / CCR violation Failing to issue a required notice, missing the CCR deadline, omitting required content Tier 3
Other Failure to correct a significant deficiency, variance and exemption conditions, recordkeeping Varies
A monitoring violation is still a violation. It appears on the CCR, it appears in the state's enforcement data, and repeated monitoring violations are among the most common reasons small systems end up under a consent order. The sample that was never taken is a certain violation; the sample that was taken and came back high may not be.
5. Sanitary Surveys and Significant Deficiencies
A sanitary survey is an on-site review by VDH of the system's capability to deliver safe water. Frequency is generally every 3 years for community systems and every 5 years for non-community systems , with shorter intervals for systems with a history of problems and longer intervals available for outstanding performers.
- The eight elements evaluated
- Source - protection, construction, and quality
- Treatment
- Distribution system
- Finished water storage
- Pumps, pump facilities, and controls
- Monitoring, reporting, and data verification
- Water system management and operations
- Operator compliance with state requirements
Note element 8: the operator's own license status and compliance are a survey element. A classified waterworks operating without a properly licensed operator is a survey finding.
Significant deficiencies
A significant deficiency is a defect in design, operation, maintenance, or a failure or malfunction of a source, treatment, storage, or distribution component that the state determines to be causing, or has the potential to cause, the introduction of contamination. Common examples at Virginia systems: unscreened or damaged storage tank vents, an overflow pipe without an air gap, an unsealed well casing or missing sanitary seal, a cross-connection, inadequate disinfection contact time, and unsecured facilities.
When a significant deficiency is identified, the system must consult with the state within 30 days and complete corrective action or be on a state-approved corrective action schedule. Failing to correct is a treatment technique violation under the Ground Water Rule and triggers public notification.
Preparing for a survey
Have ready: the current operating permit, plant records and monthly operating reports for the review period, laboratory reports, the sample siting plan, the cross-connection control program records, the emergency response plan, tank inspection reports, calibration records, valve exercising and flushing records, the service line inventory, operator licenses and CPE documentation, and the corrective action status of any prior findings. A survey goes badly not because the plant is bad but because the records cannot be produced.