Study guide

6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment

Virginia Water/Wastewater Operator Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Virginia Licensing, Regulations & Administrative Standards

1.1 Virginia DPOR Board Structure, License Categories & Scope of Practice 1.2 Experience, Education, Substitutions & Examination Approval 1.3 Renewal, Reinstatement, CPE Requirements & Discipline 1.4 Virginia Drinking Water & Wastewater Environmental Governance 1.5 Facility Classification & Minimum Operator Attendance 1.6 The ABC/WPI Exam Blueprint, References & Test-Day Rules 1.7 License Maintenance, Reporting Duties & Professional Conduct

2 Chapter 2: Source Water & Drinking Water Treatment Unit Processes

2.1 Source Water Hydrology, Groundwater Protection & Raw Water Quality 2.2 Coagulation, Flocculation & Sedimentation Processes 2.3 Filtration Technologies & Media Management 2.4 Disinfection Chemistry, CT Calculations & Disinfection Byproducts 2.5 Corrosion Control, Softening & Fluoridation Chemistry 2.6 Pretreatment: Screening, Presedimentation, Aeration & Preoxidation 2.7 Filter Backwash, Surface Wash, Air Scour & Filter Surveillance 2.8 Membrane Systems: MF, UF, NF and RO Operation & Integrity Testing 2.9 Water Treatment Residuals: Handling, Thickening & Disposal 2.10 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 2.11 Process Monitoring, Trend Interpretation & Plant Optimization 2.12 Iron and Manganese, Taste-and-Odor Control, GAC & PFAS

3 Chapter 3: Wastewater Treatment, Biological Processes & Biosolids

3.1 Preliminary Treatment & Primary Clarification 3.2 Activated Sludge Dynamics & Secondary Process Control 3.3 Attached Growth Systems & Advanced Biological Processes 3.4 Biological & Chemical Nutrient Removal (BNR/ENR) 3.5 Solids Thickening, Digestion & Biosolids Management 3.6 Wastewater Characteristics, Influent Loading & Industrial Pretreatment 3.7 Secondary Clarifier Operation & Sludge Blanket Control 3.8 Lagoons, Stabilization Ponds & Natural Treatment Systems 3.9 Tertiary Filtration, Effluent Polishing & Water Reuse 3.10 Wastewater Disinfection & Dechlorination Systems 3.11 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 3.12 Digester Gas Handling, Cogeneration & Gas System Safety 3.13 Biosolids Land Application, Part 503 & Virginia Permitting

4 Chapter 4: Distribution Networks, Collection Systems & Hydraulic Systems

4.1 Water Distribution Networks, Storage & Pressure Management 4.2 Cross-Connection Control & Backflow Prevention Assemblies 4.3 Wastewater Collection Systems, Lift Stations & Inflow/Infiltration 4.4 Centrifugal & Positive Displacement Pumps 4.5 Motors, Drives, Control Systems & SCADA 4.6 Storage Tank Inspection, Meters, Services & Distribution Appurtenances 4.7 Main Disinfection, Flushing & Distribution Water Quality Management 4.8 Sewer Cleaning, CCTV Inspection & Collection System Rehabilitation 4.9 Maintenance Programs, Asset Management & Pump Efficiency Testing 4.10 Odor Control, Standby Power & Ancillary Plant Equipment

5 Chapter 5: Laboratory Analysis, Environmental Safety & Applied Math

5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols 5.2 Confined Space Entry, Chemical Safety & OSHA/VOSH Compliance 5.3 Hydraulic, Dosage & Pounds Formula Math 5.4 Wastewater Process & Loading Rate Mathematics 5.5 Drinking Water Microbiology & the Revised Total Coliform Rule 5.6 Wastewater Laboratory Analysis: Nutrients, Metals, WET & Regulatory Testing 5.7 Instrument Calibration, Online Analyzers & Data Validation 5.8 Process Control Testing: Jar Tests, Settleometer & Microscopic Examination 5.9 Chemical Receiving, Storage, Spill Response & Hazardous Waste 5.10 Electrical Safety, Fall Protection, Excavation & Traffic Control 5.11 PPE, Respiratory Protection & Biological Hazards 5.12 Advanced Applied Math: Mass Balance, Blending & Efficiency

6 Chapter 6: Regulatory Compliance, Reporting & Plant Administration

6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations 6.2 Public Notification, Consumer Confidence Reports & Customer Complaints 6.3 VPDES Permit Compliance, DMRs & Overflow Reporting 6.4 Operating Records, Logbooks, Reports & Data Integrity 6.5 Emergency Response Planning & AWIA Risk and Resilience 6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment 6.7 Budgeting, Procurement, Inventory & Capital Planning 6.8 Supervision, Training, SOP Development & Resource Optimization

6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment

Key Takeaways Explain This Topic AI

Physical security is layered as deterrence, detection, delay, and response, and detection without a defined response is not security.

The single most important cybersecurity control for a water utility control network is segmentation, isolating the operational technology network from the corporate information technology network and the internet through firewalls and an industrial demilitarized zone.

Remote access to a control system must require an encrypted virtual private network with multi-factor authentication, and default or shared credentials must be eliminated.

Documented water sector cyber incidents have most often exploited internet-exposed devices, default passwords, unpatched remote access software, and former employee credentials rather than sophisticated attacks.

Cyber incidents affecting a water system should be reported to the state primacy agency, to CISA, and to the FBI, and the emergency response plan must include manual operating procedures for running the plant without SCADA.

Last updated: August 2026

Facility Security, SCADA Cybersecurity & Vulnerability Assessment

The ABC criteria list "perform facility and perimeter security," "perform cyber security according to industry standards," and "conduct routine security checks" as job tasks, and the AWIA risk and resilience assessment expressly requires evaluating "electronic, computer, or other automated systems (including the security of such systems)."

1. Physical Security in Four Layers

Layer Purpose Examples

Deter Make the facility an unattractive target Fencing, lighting, signage, visible cameras, a maintained and occupied appearance

Detect Know that something is happening Intrusion alarms on doors, hatches, and gates; motion detection; camera analytics; SCADA alarms on unexpected valve or pump state changes

Delay Buy time for the response Locks, hardened doors and hatches, bollards, vehicle barriers, layered gates

Respond Do something about it Alarm monitoring with a defined response - who is called, who goes, and what they do

Detection without a defined response is theatre. An alarm that sounds in an unstaffed building at 2 a.m. accomplishes nothing.

Site-specific hardening

Wells and pump stations - locked, alarmed, vented securely, with sanitary well caps that are also tamper-resistant. These are usually the most remote and least visited assets.

Storage tanks - locked and alarmed hatches, ladder guards or removable lower ladder sections, no climbable adjacent structures, fenced sites.

Chemical storage and unloading - controlled access, supervised deliveries, and unique keyed fill connections (which is a security control as well as a safety control).

Plant perimeter - continuous fence, controlled gates, clear zones, adequate lighting at entry points and around tanks.

Buildings - controlled entry, visitor sign-in and escort, contractor management.

Access control and keys

Individual credentials , not shared. Electronic access control provides an audit trail; a master key does not.

Immediate revocation on separation. Every departure - resignation, termination, retirement, contractor demobilization - triggers key return, badge deactivation, and account deactivation on every system.

Periodic audit of who has access to what, at least annually.

Insider threat

The most damaging water sector incidents have frequently involved current or former insiders with legitimate knowledge and, often, credentials that were never revoked. The controls are unglamorous: least-privilege access, separation of duties for high-consequence actions, prompt offboarding, and monitoring for unusual access patterns.

2. Why OT Is Not IT

Operational technology - the PLCs, RTUs, HMIs, historians, and instruments that run the plant - has different priorities from corporate IT.

  • IT priority OT priority
  • First Confidentiality Availability and safety
  • Then Integrity Integrity
  • Last Availability Confidentiality
  • Patching Frequent, automatic Infrequent, tested, scheduled around outages
  • Device life 3 to 5 years 15 to 25 years
  • Downtime tolerance Minutes to hours Often zero

Protocols TCP/IP, encrypted, authenticated Modbus, DNP3, EtherNet/IP - often with no authentication or encryption at all

That last row is the crux. Legacy industrial protocols were designed for isolated networks and generally do not authenticate commands. A device that can reach a PLC on such a protocol can command it. Security therefore has to come from controlling who can reach the network , not from the devices themselves.

  • 3. The Controls That Actually Matter
  • 1. Network segmentation - the highest-value control

Separate the OT network from the corporate IT network and from the internet with firewalls .

Use an industrial demilitarized zone (IDMZ) for any data that must cross - the historian replica, the reporting server - so that no session ever runs directly from the corporate network to a PLC.

Segment further within OT by process area or site, so a compromise of one lift station RTU does not reach the plant.

No PLC, HMI, or RTU should be directly reachable from the internet. Devices exposed on the public internet are found by search engines that index industrial protocols, and they are the most common initial access point in documented water sector incidents.

2. Remote access

Encrypted VPN with multi-factor authentication , terminating in the IDMZ rather than on the OT network.

Named individual accounts with least privilege; no shared logins .

Vendor access on demand only - enabled for a defined window, monitored, and disabled afterward. Standing always-on vendor tunnels are a recurring finding.

Session logging.

3. Credentials

Change every default password on PLCs, HMIs, switches, radios, cameras, and analyzers - default credentials are published in the vendor manual and in every hacker reference.

Unique passwords per device ; a password manager, not a spreadsheet named "passwords."

MFA everywhere it can be applied , especially remote access and administrative accounts.

Deactivate accounts immediately on separation - the most cited water sector incident cause.

4. Asset inventory and patching

You cannot protect what you have not inventoried. Maintain a list of every device, its firmware version, its network address, and its owner.

Track vendor advisories; test patches on a bench or during a planned outage; where a device cannot be patched, compensate with segmentation and monitoring.

5. Backup and recovery

Offline, tested backups of PLC programs, HMI configurations, historian data, and engineering workstations.

Test the restore. A PLC program backup nobody has ever restored is a hope.

Manual operating procedures - the plant must be able to run without SCADA. Write them, train on them, and drill them.

6. Monitoring and logging

Log authentication, configuration changes, and firewall denies.

Alarm on unexpected control actions : a valve that moved with no operator command, a setpoint that changed outside working hours, a pump start with no corresponding HMI action.

Because OT traffic is highly repetitive, anomaly detection works unusually well here.

7. Training and phishing resistance

Most intrusions still start with a person. Annual training, phishing simulation, and a low-friction way to report a suspicious message do more than most technical controls.

4. Vulnerability Assessment

The AWIA risk and resilience assessment is a vulnerability assessment with a statutory name. Common methodologies include AWWA J100 (Risk and Resilience Management of Water and Wastewater Systems) , VSAT (EPA's Vulnerability Self-Assessment Tool), and the AWWA Water Sector Cybersecurity Risk Management Guidance with its assessment tool.

The structure

Characterize assets - what exists, what it does, what depends on it.

Identify threats - malevolent acts (physical intrusion, chemical release, cyberattack, insider, contamination) and natural hazards (flood, hurricane, ice, earthquake, drought, wildfire).

Evaluate consequences - public health, service outage duration, economic, environmental, and reputational.

Assess vulnerability - how likely is a given threat to succeed against the current controls?

Estimate risk - consequence x vulnerability x threat likelihood .

Evaluate countermeasures and their risk reduction per dollar .

Prioritize and fund , and feed the result into the capital plan and the ERP.

Handle the product carefully. A completed vulnerability assessment is a roadmap of exactly how to hurt the utility. Control its distribution, mark it appropriately, do not email it broadly, and consider whether it is exempt from public records disclosure under applicable Virginia provisions.

5. Incident Reporting and Resources

Report to For

VDH Office of Drinking Water / DEQ regional office Any incident affecting the ability to deliver safe water or to meet permit conditions

  • Local law enforcement Physical intrusion, tampering, theft
  • FBI Suspected criminal cyber activity or terrorism

CISA (Cybersecurity and Infrastructure Security Agency) Cyber incidents; CISA also provides free vulnerability scanning and assessment services to water utilities

  • WaterISAC Sector-specific threat information sharing, both directions
  • Local emergency management Anything with public safety implications

Free resources Virginia utilities should be using: CISA's cyber hygiene vulnerability scanning, CISA regional cybersecurity advisors, EPA's water sector cybersecurity evaluation program, WaterISAC advisories, and the AWWA cybersecurity guidance and tool.

The blunt lesson from documented water sector cyber incidents: they have overwhelmingly exploited internet-exposed devices, unchanged default passwords, unpatched remote access software, and credentials belonging to former employees. These are not sophisticated attacks, and the defenses against them are neither expensive nor technically difficult. They are, however, easy to postpone - which is exactly why they get exploited.