Study guide
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols
Virginia Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Virginia Licensing, Regulations & Administrative Standards
1.1 Virginia DPOR Board Structure, License Categories & Scope of Practice 1.2 Experience, Education, Substitutions & Examination Approval 1.3 Renewal, Reinstatement, CPE Requirements & Discipline 1.4 Virginia Drinking Water & Wastewater Environmental Governance 1.5 Facility Classification & Minimum Operator Attendance 1.6 The ABC/WPI Exam Blueprint, References & Test-Day Rules 1.7 License Maintenance, Reporting Duties & Professional Conduct
2 Chapter 2: Source Water & Drinking Water Treatment Unit Processes
2.1 Source Water Hydrology, Groundwater Protection & Raw Water Quality 2.2 Coagulation, Flocculation & Sedimentation Processes 2.3 Filtration Technologies & Media Management 2.4 Disinfection Chemistry, CT Calculations & Disinfection Byproducts 2.5 Corrosion Control, Softening & Fluoridation Chemistry 2.6 Pretreatment: Screening, Presedimentation, Aeration & Preoxidation 2.7 Filter Backwash, Surface Wash, Air Scour & Filter Surveillance 2.8 Membrane Systems: MF, UF, NF and RO Operation & Integrity Testing 2.9 Water Treatment Residuals: Handling, Thickening & Disposal 2.10 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 2.11 Process Monitoring, Trend Interpretation & Plant Optimization 2.12 Iron and Manganese, Taste-and-Odor Control, GAC & PFAS
3 Chapter 3: Wastewater Treatment, Biological Processes & Biosolids
3.1 Preliminary Treatment & Primary Clarification 3.2 Activated Sludge Dynamics & Secondary Process Control 3.3 Attached Growth Systems & Advanced Biological Processes 3.4 Biological & Chemical Nutrient Removal (BNR/ENR) 3.5 Solids Thickening, Digestion & Biosolids Management 3.6 Wastewater Characteristics, Influent Loading & Industrial Pretreatment 3.7 Secondary Clarifier Operation & Sludge Blanket Control 3.8 Lagoons, Stabilization Ponds & Natural Treatment Systems 3.9 Tertiary Filtration, Effluent Polishing & Water Reuse 3.10 Wastewater Disinfection & Dechlorination Systems 3.11 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 3.12 Digester Gas Handling, Cogeneration & Gas System Safety 3.13 Biosolids Land Application, Part 503 & Virginia Permitting
4 Chapter 4: Distribution Networks, Collection Systems & Hydraulic Systems
4.1 Water Distribution Networks, Storage & Pressure Management 4.2 Cross-Connection Control & Backflow Prevention Assemblies 4.3 Wastewater Collection Systems, Lift Stations & Inflow/Infiltration 4.4 Centrifugal & Positive Displacement Pumps 4.5 Motors, Drives, Control Systems & SCADA 4.6 Storage Tank Inspection, Meters, Services & Distribution Appurtenances 4.7 Main Disinfection, Flushing & Distribution Water Quality Management 4.8 Sewer Cleaning, CCTV Inspection & Collection System Rehabilitation 4.9 Maintenance Programs, Asset Management & Pump Efficiency Testing 4.10 Odor Control, Standby Power & Ancillary Plant Equipment
5 Chapter 5: Laboratory Analysis, Environmental Safety & Applied Math
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols 5.2 Confined Space Entry, Chemical Safety & OSHA/VOSH Compliance 5.3 Hydraulic, Dosage & Pounds Formula Math 5.4 Wastewater Process & Loading Rate Mathematics 5.5 Drinking Water Microbiology & the Revised Total Coliform Rule 5.6 Wastewater Laboratory Analysis: Nutrients, Metals, WET & Regulatory Testing 5.7 Instrument Calibration, Online Analyzers & Data Validation 5.8 Process Control Testing: Jar Tests, Settleometer & Microscopic Examination 5.9 Chemical Receiving, Storage, Spill Response & Hazardous Waste 5.10 Electrical Safety, Fall Protection, Excavation & Traffic Control 5.11 PPE, Respiratory Protection & Biological Hazards 5.12 Advanced Applied Math: Mass Balance, Blending & Efficiency
6 Chapter 6: Regulatory Compliance, Reporting & Plant Administration
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations 6.2 Public Notification, Consumer Confidence Reports & Customer Complaints 6.3 VPDES Permit Compliance, DMRs & Overflow Reporting 6.4 Operating Records, Logbooks, Reports & Data Integrity 6.5 Emergency Response Planning & AWIA Risk and Resilience 6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment 6.7 Budgeting, Procurement, Inventory & Capital Planning 6.8 Supervision, Training, SOP Development & Resource Optimization
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols
Key Takeaways Explain This Topic AI
Representative sampling requires grab samples for unstable, volatile, or rapidly changing parameters (pH, dissolved oxygen, residual chlorine, fecal coliform/E. coli, oil and grease) and flow-proportional 24-hour composite samples for aggregate loading parameters (BOD5, COD, TSS, total phosphorus, total nitrogen).
Regulatory sample holding times strictly dictate testing validity: pH, dissolved oxygen, and residual chlorine must be analyzed within 15 minutes of collection; fecal coliform/E. coli within 6 to 8 hours; BOD5 within 48 hours; and TSS within 7 days when preserved on wet ice at ≤ 4°C.
The standard 5-day Biochemical Oxygen Demand (BOD5) test protocol requires incubation at 20°C ± 1.0°C in the dark for 5 days ± 6 hours, requiring a minimum DO depletion of 2.0 mg/L and a minimum residual DO of 1.0 mg/L for valid depletion calculations.
Total Suspended Solids (TSS) analysis utilizes filtration through standard glass fiber filters (Whatman 934-AH) dried at 103°C–105°C, while Volatile Suspended Solids (VSS) are combusted at 550°C in a muffle furnace to quantify the organic biological fraction.
Bacteriological compliance verification utilizes either Membrane Filtration (MF) or enzyme-substrate liquid methods (Colilert ONPG/MUG), where ortho-nitrophenyl-β-D-galactopyranoside (ONPG) cleavage produces yellow color (total coliform) and 4-methylumbelliferyl-β-D-glucuronide (MUG) cleavage fluoresces bright blue under 365 nm UV light (E. coli).
Last updated: August 2026
Water & Wastewater Laboratory Analysis & QA/QC Protocols
Laboratory testing provides the empirical foundation for process control, environmental compliance reporting, and public health protection in waterworks and wastewater works. Certified operators must understand the chemical and biological principles governing analytical methods, strict sample collection and preservation rules, standard testing mechanics, and quality assurance/quality control (QA/QC) protocols.
1. Sample Collection Strategies: Grab vs. Composite Sampling
Collecting a truly representative sample is the single most critical step in laboratory analysis. If a sample is improperly collected, contaminated, or degraded prior to analysis, even the most sophisticated analytical instrumentation will yield invalid data. SAMPLING STRATEGIES
- |
- +-------------------+-------------------+
- | |
- GRAB SAMPLING COMPOSITE SAMPLING
- | |
- Instantaneous single aliquot - Multiple aliquots combined
- Analyzed immediately / preserved - 24-hour collection period
- MANDATORY FOR: - MANDATORY FOR:
- * pH & Temperature * Biochemical Oxygen Demand (BOD5)
- * Dissolved Oxygen (DO) * Chemical Oxygen Demand (COD)
- * Total / Free Chlorine Residual * Total Suspended Solids (TSS)
- * Fecal Coliform & E. coli * Total Nitrogen (TKN, NO3, NO2)
- * Oil & Grease / Hydrocarbons * Total Phosphorus (TP)
- * Volatile Organic Compounds (VOCs) * Heavy Metals (composite digestion)
- Grab Sampling
A grab sample is an individual discrete sample collected at a specific location, depth, and point in time. Grab sampling is mandatory for parameters that degrade, degas, volatilize, or biologically alter rapidly:
Volatile / Gaseous Parameters: Dissolved oxygen (DO), free/total chlorine residual, carbon dioxide, and volatile organic compounds (VOCs). Agitation and time cause gas stripping.
Rapidly Shifting Chemical Equilibria: pH, temperature, and oxidation-reduction potential (ORP), which change within minutes due to atmospheric exposure and temperature equilibration.
Biological / Microbiological Targets: Total coliform, fecal coliform, and Escherichia coli . Microbial populations can multiply or die off rapidly in sample bottles.
Surface-Adhering Substances: Oil and grease (hexane extractable materials). Oil adheres tenaciously to automatic sampler tubing, peristaltic pumps, and collection carboys, preventing accurate composite homogenization. Grab samples for oil and grease must be collected directly into dedicated wide-mouth glass bottles with PTFE-lined caps.
Composite Sampling
A composite sample consists of multiple discrete sample aliquots collected over an extended timeframe (typically a 24-hour operating cycle) and combined into a single homogeneous container.
Time-Proportional Compositing: Discrete aliquots of fixed, identical volume collected at equal, fixed time intervals (e.g., 100 mL 100\text{ mL} 100 mL collected every 60 minutes for 24 hours). This approach is valid only where flow rates remain essentially constant throughout the collection window.
Flow-Proportional (Flow-Paced) Compositing: The industry standard for municipal and industrial wastewater facilities. Aliquots are collected in direct proportion to stream flow volume. This is achieved either by:
Collecting a constant volume at variable time intervals triggered by a flow meter pulse (e.g., 100 mL 100\text{ mL} 100 mL collected every time 10 , 000 gallons 10,000\text{ gallons} 10 , 000 gallons pass through the flume).
Collecting variable volumes at constant time intervals based on flow rate at that time (e.g., every 30 minutes, collecting an aliquot volume directly proportional to instantaneous MGD).
Composite Applications: 5-day Biochemical Oxygen Demand ( BOD 5 \text{BOD}_5 BOD 5 ), Chemical Oxygen Demand (COD), Total Suspended Solids (TSS), Total Kjeldahl Nitrogen (TKN), Total Phosphorus (TP), and Total Dissolved Solids (TDS).
2. Sample Preservation Techniques, Containers & Regulatory Holding Times
Under EPA 40 CFR Part 136 ( Guidelines Establishing Test Procedures for the Analysis of Pollutants ) and Standard Methods for the Examination of Water and Wastewater, specific preservation chemicals and holding times are legally mandated.
Parameter Sample Container Required Preservative Maximum Allowable Holding Time Primary Degradation Mechanism / Purpose
pH Plastic (HDPE) or Borosilicate Glass None; analyze on-site 15 minutes (Immediate) Carbon dioxide exchange alters carbonic acid equilibrium ( H 2 C O 3 ⇌ H C O 3 − + H + H_2CO_3 \rightleftharpoons HCO_3^- + H^+ H 2 C O 3 ⇌ H C O 3 − + H + ).
Dissolved Oxygen (DO) Glass BOD bottle (glass stopper) None (optical probe) or Winkler fixation on-site 15 minutes (Electrode) / 8 hours (Fixed Winkler) Atmospheric re-aeration or biological microbial respiration consumes/adds DO.
Total / Free Chlorine Plastic (HDPE) or Glass None; analyze on-site 15 minutes (Immediate) Rapid photolytic and chemical reduction of hypochlorous acid / hypochlorite ion.
Temperature Thermometer / Thermistor None; measure on-site 15 minutes (Immediate) Heat exchange with surrounding ambient atmosphere.
Total / Fecal Coliform / E. coli Sterile Polypropylene or Borosilicate Glass with sodium thiosulfate Cool ≤ 10 ∘ C \le 10^\circ\text{C} ≤ 1 0 ∘ C (drinking) / ≤ 6 ∘ C \le 6^\circ\text{C} ≤ 6 ∘ C on wet ice; N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 to dechlorinate 6 hours (Wastewater regulatory) / 8 hours (Drinking water standard compliance) Microbial multiplication or die-off; residual chlorine kills target bacteria if not neutralized.
BOD5 / CBOD5 Plastic (HDPE) or Borosilicate Glass Cool on wet ice to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C ( ≤ 6 ∘ C \le 6^\circ\text{C} ≤ 6 ∘ C ); do not freeze 48 hours Heterotrophic bacteria consume bioavailable dissolved organic carbon over time.
Total Suspended Solids (TSS) Plastic (HDPE) or Glass Cool on wet ice to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C ( ≤ 6 ∘ C \le 6^\circ\text{C} ≤ 6 ∘ C ); do not freeze 7 days Microbial decomposition of organic solids and biological cell lysis alters particle mass.
Total Dissolved Solids (TDS) Plastic (HDPE) or Glass Cool on wet ice to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C ( ≤ 6 ∘ C \le 6^\circ\text{C} ≤ 6 ∘ C ) 7 days Mineral precipitation and bacterial consumption of dissolved organic solutes.
Chemical Oxygen Demand (COD) Glass or Plastic (HDPE) Acidify with sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) to p H < 2 pH < 2 p H < 2 ; Cool to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C 28 days Strong mineral acid halts biological respiration and chemical auto-oxidation.
Ammonia ( N H 3 -N NH_3\text{-N} N H 3 -N ) Glass or Plastic (HDPE) Acidify with H 2 S O 4 H_2SO_4 H 2 S O 4 to p H < 2 pH < 2 p H < 2 ; Cool to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C 28 days Acid protonates free ammonia to stable ammonium ( N H 4 + NH_4^+ N H 4 + ) and prevents nitrification.
Nitrate + Nitrite ( N O 3 + N O 2 NO_3 + NO_2 N O 3 + N O 2 ) Glass or Plastic (HDPE) Acidify with H 2 S O 4 H_2SO_4 H 2 S O 4 to p H < 2 pH < 2 p H < 2 ; Cool to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C 28 days Halts biological denitrification and bacterial nitrification cycles.
Total Phosphorus (TP) Glass (acid-washed borosilicate) Acidify with H 2 S O 4 H_2SO_4 H 2 S O 4 to p H < 2 pH < 2 p H < 2 ; Cool to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C 28 days Halts biological uptake and enzymatic polyphosphate conversion to orthophosphate.
Oil & Grease (HEM) Wide-mouth glass bottle with PTFE liner Acidify with H 2 S O 4 H_2SO_4 H 2 S O 4 or H C l HCl H Cl to p H < 2 pH < 2 p H < 2 ; Cool to ≤ 4 ∘ C \le 4^\circ\text{C} ≤ 4 ∘ C 28 days Lowers pH to hydrolyze fatty acid soaps and inhibit bacterial biodegradation.
Metals (Total Recoverable) Acid-rinsed Polyethylene (HDPE) Acidify with concentrated nitric acid ( H N O 3 HNO_3 H N O 3 ) to p H < 2 pH < 2 p H < 2 6 months (180 days; Mercury = 28 days) Nitric acid solubilizes metal ions and prevents adsorption onto container walls.
Dechlorination Chemistry for Bacteriological Samples
When sampling chlorinated effluent or drinking water for bacteriological testing, sample bottles must contain sodium thiosulfate ( N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 ) (typically 0.1 mL 0.1\text{ mL} 0.1 mL of a 10 % 10\% 10% solution per 120 mL 120\text{ mL} 120 mL sample volume) prior to autoclaving. Sodium thiosulfate instantly neutralizes free and combined chlorine residuals, preventing continuous disinfection in the bottle: N a 2 S 2 O 3 + 4 C l 2 + 5 H 2 O ⟶ 2 N a H S O 4 + 8 H C l Na_2S_2O_3 + 4Cl_2 + 5H_2O \longrightarrow 2NaHSO_4 + 8HCl N a 2 S 2 O 3 + 4 C l 2 + 5 H 2 O ⟶ 2 N a H S O 4 + 8 H Cl
3. Standard Analytical Test Procedures & Bench Protocols
Certified laboratory technicians and operators execute standardized analytical workflows in accordance with Standard Methods and EPA-approved methodologies.
pH Measurement (Electrometric Method)
Principle: Measures the hydrogen ion activity [ H + ] [H^+] [ H + ] using a glass sensing electrode paired with a reference electrode (commonly A g / A g C l Ag/AgCl A g / A g Cl ).
Calibration Protocol: Must be calibrated daily prior to use with a minimum of two standard buffer solutions (typically pH 4.00, 7.00, and 10.00) that bracket the expected sample range. The meter must achieve an electrode slope efficiency between 95 % 95\% 95% and 105 % 105\% 105% (approximately 56 − 60 mV 56-60\text{ mV} 56 − 60 mV per pH unit at 25 ∘ C 25^\circ\text{C} 2 5 ∘ C per the Nernst equation).
Temperature Compensation: Automatic Temperature Compensation (ATC) probe must be immersed simultaneously to correct for temperature-dependent Nernstian slope variations.
Turbidity Measurement (Nephelometry)
Principle: Nephelometric turbidimeters measure the intensity of light scattered at a 90 ∘ 90^\circ 9 0 ∘ angle from the incident light beam by suspended and colloidal particles in the sample.
Reporting: Expressed in Nephelometric Turbidity Units ( NTU ).
Calibration: Primary calibration using Formazin standards (or stabilized AMCO Clear styrene divinylbenzene polymer suspensions). Secondary standards (gel tubes) are used solely for daily calibration verification checks.
Dissolved Oxygen (DO) Analysis
Luminescent / Optical Probe Method (LDO): A blue LED excites a ruthenium lumophore sensor cap. Oxygen molecules quench the emitted red phosphorescence in direct proportion to partial pressure of O 2 O_2 O 2 . Optical probes eliminate membrane fouling and do not consume oxygen during measurement.
Membrane Electrode Method (Polarographic / Galvanic): Oxygen diffuses across a PTFE membrane and is reduced at a gold or platinum cathode, generating a current proportional to DO concentration.
Winkler Iodometric Titration (Azide Modification): The primary wet-chemical reference standard. Divalent manganese ( M n S O 4 MnSO_4 M n S O 4 ) reacts with dissolved oxygen under alkaline iodide conditions ( N a O H + K I + N a N 3 NaOH + KI + NaN_3 N a O H + K I + N a N 3 ) to form a brownish manganic basic oxide precipitate. Upon acidification with concentrated H 2 S O 4 H_2SO_4 H 2 S O 4 , iodine ( I 2 I_2 I 2 ) is liberated in exact stoichiometric equivalence to the original DO. The liberated iodine is titrated against standard 0.025 N 0.025\text{ N} 0.025 N sodium thiosulfate ( N a 2 S 2 O 3 Na_2S_2O_3 N a 2 S 2 O 3 ) to a colorless endpoint using starch indicator. DO (mg/L) = Volume of 0.025 N N a 2 S 2 O 3 titrant (mL) × 1.0 Sample Volume Titrated (mL) \text{DO (mg/L)} = \frac{\text{Volume of } 0.025\text{ N } Na_2S_2O_3\text{ titrant (mL)} \times 1.0}{\text{Sample Volume Titrated (mL)}} DO (mg/L) = Sample Volume Titrated (mL) Volume of 0.025 N N a 2 S 2 O 3 titrant (mL) × 1.0
5-Day Biochemical Oxygen Demand (BOD5 & CBOD5)
Biochemical Oxygen Demand measures the mass of molecular oxygen consumed by heterotrophic microorganisms while biochemically oxidizing organic matter in water over a standard 5-day incubation period. THE 5-DAY BOD BOTTLE INCUBATION TIMELINE
- Day 0 (Initial Setup) Day 5 (Final DO)
- +--------------------------------------------------------------+-------------------+
- | 300 mL BOD Bottle | Measure Final DO |
- | - Sample Aliquot (P) | Requirements: |
- | - Nutrients (Phosphate buffer, MgSO4, CaCl2, FeCl3) | 1. Depletion >= 2.0
- | - Seed Organisms (if sample disinfected/industrial) | 2. Residual >= 1.0
- | - TCMP Inhibitor (if measuring Carbonaceous CBOD5) | |
- | Measure Initial DO (DO_i) | Temp: 20°C ± 1°C |
- | Water-sealed cap; Incubated in total dark | Time: 120 hr ± 6 hr
- +--------------------------------------------------------------+-------------------+
Incubation Environment: Standard 300 mL 300\text{ mL} 300 mL glass BOD bottles fitted with ground-glass stoppers and flared water seals are incubated at 20.0 ∘ C ± 1.0 ∘ C 20.0^\circ\text{C} \pm 1.0^\circ\text{C} 20. 0 ∘ C ± 1. 0 ∘ C in the dark (to prevent photosynthetic oxygen generation by algae) for 5 days ± 6 hours 5\text{ days} \pm 6\text{ hours} 5 days ± 6 hours ( 120 hours 120\text{ hours} 120 hours ).
Dilution Water Quality: Reagent water fortified with phosphate buffer, magnesium sulfate ( M g S O 4 MgSO_4 M g S O 4 ), calcium chloride ( C a C l 2 CaCl_2 C a C l 2 ), and ferric chloride ( F e C l 3 FeCl_3 F e C l 3 ). The dilution water blank must not deplete more than 0.20 mg/L 0.20\text{ mg/L} 0.20 mg/L DO over the 5-day period.
Regulatory Validation Criteria (Mandatory for Valid Results):
Minimum DO Depletion: The sample dilution must consume at least 2.0 mg/L 2.0\text{ mg/L} 2.0 mg/L of dissolved oxygen over the 5-day incubation ( DO i − DO f ≥ 2.0 mg/L \text{DO}_i - \text{DO}_f \ge 2.0\text{ mg/L} DO i − DO f ≥ 2.0 mg/L ).
Minimum Residual DO: The sample dilution must retain at least 1.0 mg/L 1.0\text{ mg/L} 1.0 mg/L of dissolved oxygen at the end of Day 5 ( DO f ≥ 1.0 mg/L \text{DO}_f \ge 1.0\text{ mg/L} DO f ≥ 1.0 mg/L ) to prevent anoxic conditions.
Unseeded BOD5 Formula: BOD 5 (mg/L) = DO i − DO f P \text{BOD}_5\text{ (mg/L)} = \frac{\text{DO}_i - \text{DO}_f}{P} BOD 5 (mg/L) = P DO i − DO f Where P = Dilution Decimal Fraction = Sample Volume (mL) Total Bottle Volume (300 mL) P = \text{Dilution Decimal Fraction} = \frac{\text{Sample Volume (mL)}}{\text{Total Bottle Volume (300 mL)}} P = Dilution Decimal Fraction = Total Bottle Volume (300 mL) Sample Volume (mL) .
Seeded BOD5 Formula (for disinfected or sterile samples): BOD 5 (mg/L) = ( DO i − DO f ) − ( B i − B f ) ⋅ f P \text{BOD}_5\text{ (mg/L)} = \frac{(\text{DO}_i - \text{DO}_f) - (B_i - B_f) \cdot f}{P} BOD 5 (mg/L) = P ( DO i − DO f ) − ( B i − B f ) ⋅ f Where ( B i − B f ) (B_i - B_f) ( B i − B f ) is the seed control DO depletion, and f f f is the ratio of seed volume in the sample bottle to seed volume in the seed control bottle.
Carbonaceous BOD (CBOD5): Nitrifying bacteria ( Nitrosomonas and Nitrobacter ) oxidize ammonia to nitrite and nitrate, consuming 4.57 mg O 2 per mg N H 3 -N 4.57\text{ mg } O_2\text{ per mg } NH_3\text{-N} 4.57 mg O 2 per mg N H 3 -N oxidized. To isolate organic carbon demand, 2-chloro-6-(trichloromethyl)pyridine (TCMP) is added as a nitrification inhibitor.
Chemical Oxygen Demand (COD)
Principle: Chemical oxidation of virtually all oxidizable organic matter using a boiling mixture of strong potassium dichromate ( K 2 C r 2 O 7 K_2Cr_2O_7 K 2 C r 2 O 7 ) in concentrated sulfuric acid ( H 2 S O 4 H_2SO_4 H 2 S O 4 ) at 150 ∘ C 150^\circ\text{C} 15 0 ∘ C for 2 hours 2\text{ hours} 2 hours under reflux.
Reagents: Silver sulfate ( A g 2 S O 4 Ag_2SO_4 A g 2 S O 4 ) acts as a catalyst to accelerate straight-chain hydrocarbon oxidation; mercuric sulfate ( H g S O 4 HgSO_4 H g S O 4 ) is added to complex chloride ions and eliminate chloride interference.
Relationship to BOD: Because dichromate oxidizes non-biodegradable organics (cellulose, lignin, phenols) that bacteria cannot degrade in 5 days, COD > BOD 5 \mathbf{\text{COD} > \text{BOD}_5} COD > BOD 5 . Typical domestic municipal wastewater exhibits a COD : BOD 5 \text{COD}:\text{BOD}_5 COD : BOD 5 ratio between 2.0 : 1 2.0:1 2.0 : 1 and 2.5 : 1 2.5:1 2.5 : 1 .
- Solids Analysis: TSS, VSS, TDS, and Settleable Solids TOTAL SOLIDS (TS)
- [Evaporate at 103°C - 105°C]
- |
- +------------------+------------------+
- | |
- TOTAL SUSPENDED SOLIDS (TSS) TOTAL DISSOLVED SOLIDS (TDS)
- [Retained on Whatman 934-AH] [Passes through filter;
- [Dried at 103°C - 105°C] evaporated at 180°C]
- |
- +------------+------------+
- | |
- VOLATILE SUSPENDED FIXED SUSPENDED
- SOLIDS (VSS) SOLIDS (FSS)
- [Combusted at 550°C] [Inorganic Ash Residue]
- [Biological Organics] [Grit, Silt, Minerals]
Total Suspended Solids (TSS): A well-mixed sample aliquot is vacuum-filtered through a pre-weighed, pre-washed Whatman 934-AH glass fiber filter disk ( 1.5 μ m 1.5\,\mu\text{m} 1.5 μ m nominal pore size). The filter is dried in a laboratory drying oven at 103 ∘ C − 105 ∘ C 103^\circ\text{C} - 105^\circ\text{C} 10 3 ∘ C − 10 5 ∘ C for at least 1 hour, cooled in a desiccator, and weighed on an analytical balance to 0.1 mg 0.1\text{ mg} 0.1 mg ( 0.0001 g 0.0001\text{ g} 0.0001 g ): TSS (mg/L) = ( W post-dry − W tare ) in grams × 1 , 000 , 000 Sample Volume Filtered (mL) \text{TSS (mg/L)} = \frac{(W_{\text{post-dry}} - W_{\text{tare}})\text{ in grams} \times 1,000,000}{\text{Sample Volume Filtered (mL)}} TSS (mg/L) = Sample Volume Filtered (mL) ( W post-dry − W tare ) in grams × 1 , 000 , 000
Volatile Suspended Solids (VSS): The dried TSS filter is placed in a muffle furnace at 550 ∘ C ± 50 ∘ C 550^\circ\text{C} \pm 50^\circ\text{C} 55 0 ∘ C ± 5 0 ∘ C for 15 to 20 minutes. Organic matter combusts to C O 2 CO_2 C O 2 and H 2 O H_2O H 2 O , leaving inorganic mineral ash (Fixed Suspended Solids, FSS). The weight lost represents VSS, which quantifies the active biological biomass in aeration basins (MLVSS): VSS (mg/L) = ( W post-dry − W post-muffle ) in grams × 1 , 000 , 000 Sample Volume Filtered (mL) \text{VSS (mg/L)} = \frac{(W_{\text{post-dry}} - W_{\text{post-muffle}})\text{ in grams} \times 1,000,000}{\text{Sample Volume Filtered (mL)}} VSS (mg/L) = Sample Volume Filtered (mL) ( W post-dry − W post-muffle ) in grams × 1 , 000 , 000
Total Dissolved Solids (TDS): The filtrate passing through the glass fiber filter is transferred to a pre-weighed evaporating dish and evaporated to dryness in an oven at 180 ∘ C ± 2 ∘ C 180^\circ\text{C} \pm 2^\circ\text{C} 18 0 ∘ C ± 2 ∘ C .
Settleable Solids: Measured directly using an Imhoff cone . Fill the 1.0 -liter 1.0\text{-liter} 1.0 -liter Imhoff cone to the mark with well-mixed wastewater. Allow to settle undisturbed for 45 minutes , gently run a glass rod around the inner rim to dislodge clinging solids on the slope, allow to settle for an additional 15 minutes (total time = 60 minutes ), and read the settled volume directly from the graduated apex in mL/L .
Alkalinity & Hardness Titrations
Total Alkalinity: Measures acid-neutralizing capacity. Titrated with standardized 0.0200 N H 2 S O 4 0.0200\text{ N } H_2SO_4 0.0200 N H 2 S O 4 to a phenolphthalein endpoint at p H = 8.3 pH = 8.3 p H = 8.3 (Phenolphthalein Alkalinity, P) and continuing to a bromocresol green-methyl red endpoint at p H = 4.5 pH = 4.5 p H = 4.5 (Total Alkalinity, T). Expressed in mg/L as CaCO 3 \text{CaCO}_3 CaCO 3 . Total Alkalinity (mg/L as CaCO 3 ) = Titrant Volume (mL) × N × 50 , 000 Sample Volume (mL) \text{Total Alkalinity (mg/L as }\text{CaCO}_3) = \frac{\text{Titrant Volume (mL)} \times N \times 50,000}{\text{Sample Volume (mL)}} Total Alkalinity (mg/L as CaCO 3 ) = Sample Volume (mL) Titrant Volume (mL) × N × 50 , 000
Total Hardness: Measures polyvalent metallic cations (primarily C a 2 + Ca^{2+} C a 2 + and M g 2 + Mg^{2+} M g 2 + ). Titrated with standardized 0.0100 M EDTA 0.0100\text{ M } \text{EDTA} 0.0100 M EDTA (ethylenediaminetetraacetic acid) buffered to p H = 10.0 pH = 10.0 p H = 10.0 using Eriochrome Black T (EBT) indicator. The color change transitions sharply from wine-red (calcium/magnesium-dye complex) to pure blue (free uncomplexed indicator). Expressed in mg/L as CaCO 3 \text{CaCO}_3 CaCO 3 .
- Microbiological Analysis: Membrane Filtration vs. Colilert Enzyme-Substrate MICROBIOLOGICAL ASSAY METHODS
- |
- +------------------+------------------+
- | |
- MEMBRANE FILTRATION (MF) ENZYME-SUBSTRATE (COLILERT)
- | |
- 100 mL passed through 0.45 um - Defined Substrate Technology (DST)
- cellulose ester filter membrane - Multi-well Quanti-Tray or Presence/Absence
- Total Coliform: m-Endo agar at - 24-hr incubation at 35°C ± 0.5°C
- 35°C for 24 hr - ONPG cleaved by beta-galactosidase
- > Golden-green metallic sheen -> YELLOW COLOR = Total Coliform
- Fecal Coliform: m-FC agar at - MUG cleaved by beta-glucuronidase
- 44.5°C water bath for 24 hr -> BLUE FLUORESCENCE under 365 nm UV
- > Distinct BLUE colonies = Escherichia coli
Membrane Filtration (MF) Method:
Exactly 100 mL 100\text{ mL} 100 mL of sample is vacuum-filtered through a sterile 47 -mm 47\text{-mm} 47 -mm , 0.45 μ m 0.45\,\mu\text{m} 0.45 μ m cellulose ester membrane filter.
Total Coliform: Filter placed on absorbent pad saturated with m-Endo broth or agar, incubated at 35.0 ∘ C ± 0.5 ∘ C 35.0^\circ\text{C} \pm 0.5^\circ\text{C} 35. 0 ∘ C ± 0. 5 ∘ C for 24 ± 2 hours 24 \pm 2\text{ hours} 24 ± 2 hours . Coliform colonies ferment lactose, producing acetaldehyde that reacts with sodium sulfite and basic fuchsin to produce dark red colonies with a brilliant golden-green metallic sheen .
Fecal (Thermotolerant) Coliform: Filter placed on m-FC medium containing rosolic acid and incubated in a circulating water bath at 44.5 ∘ C ± 0.2 ∘ C 44.5^\circ\text{C} \pm 0.2^\circ\text{C} 44. 5 ∘ C ± 0. 2 ∘ C for 24 ± 2 hours 24 \pm 2\text{ hours} 24 ± 2 hours . Fecal coliform colonies produce distinct blue colonies ; non-fecal colonies appear gray or cream.
Enzyme-Substrate / Defined Substrate Technology (DST - Colilert / Quanti-Tray):
Utilizes two distinct enzyme substrates simultaneously within a nutrient salt matrix:
ONPG (ortho-nitrophenyl- β \beta β -D-galactopyranoside): The enzyme β \beta β -galactosidase , produced by all coliform bacteria, hydrolyzes ONPG into colorless galactose and bright yellow ortho-nitrophenol . A yellow color change after 24 hours at 35 ∘ C 35^\circ\text{C} 3 5 ∘ C confirms the presence of Total Coliforms .
MUG (4-methylumbelliferyl- β \beta β -D-glucuronide): The enzyme β \beta β -glucuronidase , produced specifically by Escherichia coli , hydrolyzes MUG to yield 4-methylumbelliferone , which fluoresces bright electric blue under a 6-watt, 365-nm longwave ultraviolet (UV) light . Fluorescence confirms the presence of E. coli .
Chlorine Residual Analysis (DPD Colorimetric Method)
Free Chlorine: N,N-diethyl-p-phenylenediamine (DPD) indicator reacts instantaneously in the presence of buffer at p H = 6.2 − 6.5 pH = 6.2 - 6.5 p H = 6.2 − 6.5 with hypochlorous acid ( H O C l HOCl H OCl ) and hypochlorite ion ( O C l − OCl^- OC l − ) to form a magenta/pink Wurster dye complex . Absorbance is measured spectrophotometrically at 515 nm 515\text{ nm} 515 nm .
Combined & Total Chlorine: Adding excess potassium iodide ( K I KI K I ) catalyzes the oxidation of iodide to iodine by monochloramine and dichloramine, which subsequently reacts with DPD. Total chlorine is read after 2 minutes. Combined chlorine is calculated by difference: Combined Chlorine = Total Chlorine − Free Chlorine \text{Combined Chlorine} = \text{Total Chlorine} - \text{Free Chlorine} Combined Chlorine = Total Chlorine − Free Chlorine
4. Laboratory Quality Assurance & Quality Control (QA/QC)
To ensure data integrity, defensibility in environmental enforcement proceedings, and accuracy in compliance reporting under Virginia DEQ and VDH permits, laboratories maintain comprehensive QA/QC programs.
Core QA/QC Elements & Control Standards
Chain of Custody (COC): A legally binding document that tracks sample possession from collection through laboratory log-in, analytical batching, data entry, and final disposal. Every transfer includes date, time, sample ID, container count, preservative verification, cooler temperature receipt check (must be ≤ 6 ∘ C \le 6^\circ\text{C} ≤ 6 ∘ C on wet ice), and signatures of relinquisher and recipient.
Method Blanks (Reagent Blanks): Deionized reagent water processed through all analytical extraction, digestion, and measurement steps identical to environmental samples. Must demonstrate contaminant concentrations below the Method Detection Limit (MDL).
Field Blanks & Trip Blanks:
Trip Blank: Ultra-pure water filled at the laboratory, transported sealed to the field in the sample cooler, and returned unopened to test for VOC diffusion through septum caps during transport.
Field Blank: Ultra-pure water poured into sample containers at the sampling site to isolate ambient airborne contamination.
Laboratory Duplicates & Relative Percent Difference (RPD): Two separate aliquots of the same environmental sample processed through the entire analytical method. Precision is evaluated via Relative Percent Difference: RPD (%) = ∣ D 1 − D 2 ∣ D 1 + D 2 2 × 100 % \text{RPD (\%)} = \frac{|D_1 - D_2|}{\frac{D_1 + D_2}{2}} \times 100\% RPD (%) = 2 D 1 + D 2 ∣ D 1 − D 2 ∣ × 100% Acceptance criteria typically mandate RPD ≤ 10 % to 20 % \text{RPD} \le 10\%\text{ to }20\% RPD ≤ 10% to 20% .
Matrix Spikes (MS) & Matrix Spike Duplicates (MSD): A known concentration of analyte is added to an environmental sample aliquot to evaluate analytical accuracy and identify matrix interferences (salinity, organic complexation, turbidity): % Recovery = C spiked sample − C unspiked sample C spike added × 100 % \%\text{ Recovery} = \frac{C_{\text{spiked sample}} - C_{\text{unspiked sample}}}{C_{\text{spike added}}} \times 100\% % Recovery = C spike added C spiked sample − C unspiked sample × 100% Acceptance criteria typically require percent recoveries within 80 % to 120 % \mathbf{80\%\text{ to }120\%} 80% to 120% (or 70 % to 130 % \mathbf{70\%\text{ to }130\%} 70% to 130% depending on the analyte).
Calibration Curves & Continuing Calibration Verification (CCV): Multi-point instrument calibrations require a minimum of 3 to 5 calibration standards across the operational range with a coefficient of determination R 2 ≥ 0.995 R^2 \ge 0.995 R 2 ≥ 0.995 . A Continuing Calibration Verification (CCV) standard and Continuing Calibration Blank (CCB) must be analyzed every 10 samples and at the conclusion of every analytical batch.