Study guide
3.3 Attached Growth Systems & Advanced Biological Processes
Virginia Water/Wastewater Operator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Virginia Licensing, Regulations & Administrative Standards
1.1 Virginia DPOR Board Structure, License Categories & Scope of Practice 1.2 Experience, Education, Substitutions & Examination Approval 1.3 Renewal, Reinstatement, CPE Requirements & Discipline 1.4 Virginia Drinking Water & Wastewater Environmental Governance 1.5 Facility Classification & Minimum Operator Attendance 1.6 The ABC/WPI Exam Blueprint, References & Test-Day Rules 1.7 License Maintenance, Reporting Duties & Professional Conduct
2 Chapter 2: Source Water & Drinking Water Treatment Unit Processes
2.1 Source Water Hydrology, Groundwater Protection & Raw Water Quality 2.2 Coagulation, Flocculation & Sedimentation Processes 2.3 Filtration Technologies & Media Management 2.4 Disinfection Chemistry, CT Calculations & Disinfection Byproducts 2.5 Corrosion Control, Softening & Fluoridation Chemistry 2.6 Pretreatment: Screening, Presedimentation, Aeration & Preoxidation 2.7 Filter Backwash, Surface Wash, Air Scour & Filter Surveillance 2.8 Membrane Systems: MF, UF, NF and RO Operation & Integrity Testing 2.9 Water Treatment Residuals: Handling, Thickening & Disposal 2.10 Chemical Feed Systems: Metering Pumps, Dry Feeders & Calibration 2.11 Process Monitoring, Trend Interpretation & Plant Optimization 2.12 Iron and Manganese, Taste-and-Odor Control, GAC & PFAS
3 Chapter 3: Wastewater Treatment, Biological Processes & Biosolids
3.1 Preliminary Treatment & Primary Clarification 3.2 Activated Sludge Dynamics & Secondary Process Control 3.3 Attached Growth Systems & Advanced Biological Processes 3.4 Biological & Chemical Nutrient Removal (BNR/ENR) 3.5 Solids Thickening, Digestion & Biosolids Management 3.6 Wastewater Characteristics, Influent Loading & Industrial Pretreatment 3.7 Secondary Clarifier Operation & Sludge Blanket Control 3.8 Lagoons, Stabilization Ponds & Natural Treatment Systems 3.9 Tertiary Filtration, Effluent Polishing & Water Reuse 3.10 Wastewater Disinfection & Dechlorination Systems 3.11 Aeration Systems, Blowers, Diffusers & Dissolved Oxygen Control 3.12 Digester Gas Handling, Cogeneration & Gas System Safety 3.13 Biosolids Land Application, Part 503 & Virginia Permitting
4 Chapter 4: Distribution Networks, Collection Systems & Hydraulic Systems
4.1 Water Distribution Networks, Storage & Pressure Management 4.2 Cross-Connection Control & Backflow Prevention Assemblies 4.3 Wastewater Collection Systems, Lift Stations & Inflow/Infiltration 4.4 Centrifugal & Positive Displacement Pumps 4.5 Motors, Drives, Control Systems & SCADA 4.6 Storage Tank Inspection, Meters, Services & Distribution Appurtenances 4.7 Main Disinfection, Flushing & Distribution Water Quality Management 4.8 Sewer Cleaning, CCTV Inspection & Collection System Rehabilitation 4.9 Maintenance Programs, Asset Management & Pump Efficiency Testing 4.10 Odor Control, Standby Power & Ancillary Plant Equipment
5 Chapter 5: Laboratory Analysis, Environmental Safety & Applied Math
5.1 Water & Wastewater Laboratory Analysis & QA/QC Protocols 5.2 Confined Space Entry, Chemical Safety & OSHA/VOSH Compliance 5.3 Hydraulic, Dosage & Pounds Formula Math 5.4 Wastewater Process & Loading Rate Mathematics 5.5 Drinking Water Microbiology & the Revised Total Coliform Rule 5.6 Wastewater Laboratory Analysis: Nutrients, Metals, WET & Regulatory Testing 5.7 Instrument Calibration, Online Analyzers & Data Validation 5.8 Process Control Testing: Jar Tests, Settleometer & Microscopic Examination 5.9 Chemical Receiving, Storage, Spill Response & Hazardous Waste 5.10 Electrical Safety, Fall Protection, Excavation & Traffic Control 5.11 PPE, Respiratory Protection & Biological Hazards 5.12 Advanced Applied Math: Mass Balance, Blending & Efficiency
6 Chapter 6: Regulatory Compliance, Reporting & Plant Administration
6.1 Safe Drinking Water Act Compliance: MCLs, Monitoring & Violations 6.2 Public Notification, Consumer Confidence Reports & Customer Complaints 6.3 VPDES Permit Compliance, DMRs & Overflow Reporting 6.4 Operating Records, Logbooks, Reports & Data Integrity 6.5 Emergency Response Planning & AWIA Risk and Resilience 6.6 Facility Security, SCADA Cybersecurity & Vulnerability Assessment 6.7 Budgeting, Procurement, Inventory & Capital Planning 6.8 Supervision, Training, SOP Development & Resource Optimization
3.3 Attached Growth Systems & Advanced Biological Processes
Key Takeaways Explain This Topic AI
Trickling filters utilize fixed media (crushed rock 12–20 ft²/ft³ or structured plastic 25–45 ft²/ft³) over which wastewater is distributed, developing a stationary microbial biofilm.
Rotating Biological Contactors (RBCs) operate with plastic discs submerged approximately 40% in wastewater, rotating at 1.0 to 2.0 rpm to alternate between wastewater feeding and atmospheric aeration.
Sequencing Batch Reactors (SBRs) perform equalization, biological oxidation, clarification, and effluent decanting in a single basin across a timed 5-phase cycle (Fill, React, Settle, Decant, Idle).
Membrane Bioreactors (MBR) replace secondary clarifiers with submerged 0.04–0.4 µm microfiltration/ultrafiltration membranes, operating at elevated MLSS levels of 8,000 to 12,000 mg/L.
Oxidation ditches operate in extended aeration mode with continuous closed-loop orbital channels, maintaining hydraulic retention times of 18–36 hours and MCRT values of 15–30 days.
Last updated: August 2026
- 3.3 Attached Growth Systems & Advanced Biological Processes
- Fundamentals of Attached-Growth (Fixed-Film) Processes
Unlike suspended-growth activated sludge systems where microorganisms are kept floating in liquid suspension, attached-growth (fixed-film) systems cultivate microorganisms on a stationary or rotating solid support medium. As primary clarified wastewater flows over the media surfaces, dissolved organic matter and oxygen diffuse into the biological slime layer ( biofilm ). Wastewater Flow Film ────────►
- ──────────────────────────────
- Aerobic Layer (0.1–0.2 mm) ◄── Oxygen & BOD Diffuse Inward
- ──────────────────────────────
- Anaerobic Layer ◄── Fermentation / Endogenous Decay
- ──────────────────────────────
- Solid Media Support Surface ◄── Biofilm Weakens & Sloughs Off
- Biofilm Kinetics & The Sloughing Phenomenon
Aerobic Zone (Outer Layer): The outer 0.1 to 0.2 mm of the biofilm receives dissolved oxygen from overlying liquid and air. Heterotrophic bacteria rapidly oxidize soluble BOD.
Anaerobic Zone (Inner Layer): As the biofilm thickens beyond 0.2 to 2.0 mm, oxygen is completely consumed before it can penetrate to the media face. Bacteria at the media boundary enter anaerobic endogenous decay, losing their ability to cling to the support surface.
Sloughing: Hydrodynamic shear forces from trickling water strip the weakened, decaying biomass from the media. This periodic detachment of accumulated biomass is known as sloughing . Sloughed solids must be settled and removed in a downstream secondary (humus) clarifier .
Trickling Filters
A trickling filter consists of a bed of highly permeable media over which wastewater is continuously sprayed by a motorized or hydraulically driven rotary distributor arm. Rotary Distributor Arm (Rotates 0.5–2.0 rpm)
- ▼ ▼
- Raw / Recycled Feed ──► ┌───────────────────────────┐
- │ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ │
- │ Fixed Biological Media │
- │ (Rock or Structured PVC) │
- │ Slime Biofilm Layer │
- └─────────────┬─────────────┘
- │ Underdrain Tiles
- ▼
- Effluent & Sloughed Biofilm to Humus Clarifier
- Media Comparison & Operational Parameters
- Media Parameter Rock / Crushed Slag Media Modern Structured Plastic / PVC Media
- Bed Depth 4 – 8 feet (1.2–2.4 m) 15 – 30 feet (4.5–9.0 m)
- Specific Surface Area 12 – 20 sq ft / cu ft (40–65 m²/m³) 25 – 45 sq ft / cu ft (80–150 m²/m³)
- Void Ratio 40% – 50% 90% – 95%
- Hydraulic Loading Rate 25 – 100 gpd/sq ft 200 – 1,500 gpd/sq ft
- Organic Loading Rate 5 – 25 lb BOD/1,000 cu ft/day 30 – 100 lb BOD/1,000 cu ft/day
- Plugging & Ponding Risk High (low void space, prone to pooling) Very Low (open vertical flutes)
- Recirculation Hydraulics
Recirculating secondary clarifier effluent or filter effluent back to the trickling filter influent (recirculation ratio R = Q r / Q = 0.5 to 3.0 R = Q_r / Q = 0.5\text{ to }3.0 R = Q r / Q = 0.5 to 3.0 ) is critical for:
Maintaining a continuous minimum wetting rate to prevent drying of the biofilm during low night flows.
Diluting high-strength industrial organic shock loads.
Providing continuous hydraulic shear to prevent excessive biofilm accumulation and media ponding.
Trickling Filter Troubleshooting
Filter Ponding (Pooling): Caused by excessive biomass buildup, media breakdown, or low hydraulic flush. Corrective Actions: Increase recirculation flow to generate higher hydraulic flush shear; dose chlorine solution (1–2 mg/L Cl 2 \text{Cl}_2 Cl 2 ) to burn surface slime; physically loosen surface rocks; or flood the filter for several hours.
Filter Flies ( Psychoda ): Tiny nuisance gnats breeding in moist, decaying biofilm. Corrective Actions: Flood the filter bed for 24 hours to drown larvae; apply low-dose periodic chlorination (0.5–1.0 mg/L); or adjust the distributor arm speed to maintain a continuous, heavy water flush curtain.
Rotating Biological Contactors (RBCs)
An RBC consists of large circular corrugated plastic sheets (typically high-density polyethylene, 10 to 12 feet in diameter) mounted closely spaced along a horizontal steel shaft up to 25 feet long. The shaft rotates at 1.0 to 2.0 rpm (peripheral tip speed ~60 ft/min), with the media discs approximately 40% submerged in a semi-circular concrete trough. Rotates 1.0–2.0 rpm
- ┌─┐
- ┌───┘ └───┐ ◄── Disc Exposed to Air (Absorbs Oxygen)
- ┌─┘ └─┐
- ┌┘ ● Shaft └┐
- Wastewater Level ───┼───────────────┼─── (~40% Submerged in Basin)
- └┐ Biofilm ┌┘
- └─┐ Layer ┌─┘ ◄── Disc Submerged (Absorbs Soluble BOD)
- └───┐ ┌───┘
- └─┘
- Staging Dynamics
RBC systems are segmented into 3 to 4 stages in series separated by baffle walls:
Stage 1 (Carbonaceous Oxidation): Receives primary effluent with high soluble BOD. Biofilm is thick (1/8 to 1/4 inch), heavy, and greyish-brown. Dissolved oxygen in the trough is low (<1.0 mg/L) due to intense heterotrophic respiration.
Stages 3 & 4 (Nitrification & Polish): As BOD is reduced below 15–20 mg/L in early stages, autotrophic nitrifiers colonize the discs. Biofilm becomes very thin (1/16 inch), velvety golden-brown, and dissolved oxygen rises to 2.0–4.0 mg/L.
RBC Mechanical & Operational Failure Modes
First-Stage Organic Overload & Loping: If first-stage organic loading exceeds 4.0–6.0 lb soluble BOD/1,000 sq ft/day, filamentous bacteria ( Beggiatoa ) proliferate, and the biofilm grows excessively thick (>1/4 inch). The immense wet biomass weight places severe rotational torque on the center shaft. When rotation stops momentarily, biomass dries unevenly, creating an eccentric weight distribution known as "loping" , which snaps steel drive shafts and shears drive chains.
Bearing & Drive Maintenance: Operators must perform routine lubrication of pillow block bearings and verify motor current draw to detect mechanical drag from unbalanced disc loading.
Hybrid Biofilm-Activated Sludge Systems
Modern facilities upgrade existing aeration basins to hybrid processes that combine attached and suspended growth within a single reactor volume:
Integrated Fixed-Film Activated Sludge (IFAS): Fixed media modules or hanging rope meshes are installed directly into conventional suspended-growth aeration basins with continuous RAS recycling. IFAS doubles the effective biomass inventory without increasing solids loading on secondary clarifiers.
Moving Bed Biofilm Reactor (MBBR): Thousands of high-density plastic carrier elements (e.g., Kaldnes K1/K3 carriers, specific surface area 500–800 m²/m³) freely circulate in the aeration basin, suspended by aeration bubbles or mechanical mixers. Perforated sieves on basin outlets retain the carriers. MBBR operates without any RAS recycle stream ; all biomass in the basin is permanently attached to the moving carriers.
Advanced Suspended-Growth & Membrane Configurations Sequencing Batch Reactor (SBR) 5-Phase Automated Cycle (Single Basin):
- ┌──────────────┐ ┌──────────────┐ ┌──────────────┐ ┌──────────────┐ ┌──────────────┐
- │ 1. FILL │ │ 2. REACT │ │ 3. SETTLE │ │ 4. DECANT │ │ 5. IDLE │
- │ Influent In │ │ Aerate/Mix │ │ Quiescent │ │ Clear Effl. │ │ Waste Sludge │
- │ Anoxic/Aerat │ │ BOD/Nitrify │ │ Zero Flow │ │ Drawn Off │ │ Rest/Cycle │
- └──────────────┘ └──────────────┘ └──────────────┘ └──────────────┘ └──────────────┘
- 1. Sequencing Batch Reactors (SBRs)
An SBR is a fill-and-draw activated sludge system where all process steps—equalization, biological oxidation, clarification, and decanting—occur sequentially in the same tank across a timed 5-phase cycle (typically 4 to 6 hours total):
Fill: Wastewater fills the tank. Can be Static Fill (anaerobic), Mixed Fill (anoxic denitrification), or Aerated Fill .
React: Dedicated aeration and mixing period to complete carbonaceous BOD oxidation and autotrophic nitrification.
Settle: All mixing and aeration cease. The basin acts as a completely quiescent secondary clarifier with zero forward flow velocity, achieving exceptional solids separation.
Decant: A motorized floating or submersible decanter lowers into the clear supernatant, drawing off clarified effluent without disturbing the settled sludge blanket.
Idle / Sludge Wasting: Small volume of WAS is pumped out to solids handling before the next cycle begins.
2. Membrane Bioreactors (MBR)
MBRs replace gravity secondary clarifiers with submerged microfiltration (0.1–0.4 µm) or ultrafiltration (0.04–0.08 µm) membrane cassettes (hollow fiber or flat sheet) immersed directly in the biological aeration basin or an adjacent membrane tank.
Elevated Biomass Operation: Because membranes provide positive physical liquid-solids separation independent of gravity settling, MBRs operate at an MLSS of 8,000 to 12,000 mg/L (3 to 4 times higher than conventional activated sludge), dramatically reducing required tank footprint.
Effluent Quality: Consistently produces effluent turbidity <0.1 NTU, TSS <1.0 mg/L, complete removal of protozoan cysts ( Giardia , Cryptosporidium ), and log-4 reduction of bacteria.
Membrane Maintenance: Continuous coarse-bubble air scouring agitates fibers to prevent cake layer accumulation. Periodic backpulsing and chemical Clean-In-Place (CIP) cycles use sodium hypochlorite (to remove organic biofouling) and citric acid (to dissolve inorganic mineral scaling).
3. Oxidation Ditches
Oxidation ditches utilize a continuous oval racetrack channel equipped with horizontal brush rotors or disc aerators. Operating in extended aeration mode with an HRT of 18 to 36 hours and MCRT of 15 to 30 days , the system provides immense buffer capacity against organic shocks and achieves full nitrification.