Study guide

16.1 Surety and Fidelity Bonds

Vermont Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Vermont Property & Casualty Insurance Exam Overview

Vermont Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

Risk, Hazards, Perils, and the Law of Large Numbers Insurable Interest, Indemnity, and Other Insurance Principles Insurance Contract Law and Elements Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D — Coverage for Damage to Your Auto 7.2 Exclusions and Part E — Duties After an Accident or Loss 7.3 Part F — General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

Farm and Agricultural Coverage Commercial Umbrella and Excess Liability Professional Liability and Errors & Omissions Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Vermont P&C Insurance Regulation & Licensing

1.1 Vermont Department of Financial Regulation 1.2 Vermont P&C Producer Licensing Requirements 1.3 Vermont Producer Responsibilities & Ethics

22 Chapter 2: Vermont Property Insurance

2.1 Vermont Homeowners Insurance 2.2 Vermont Commercial Property Insurance

23 Chapter 3: Vermont Auto & Casualty Insurance

3.1 Vermont Auto Insurance Requirements 3.2 Vermont Liability & Workers' Compensation

24 Chapter 4: Vermont Ethics & Professional Conduct

4.1 Vermont Unfair Trade Practices 4.2 Vermont Professional Standards & Best Practices

16.1 Surety and Fidelity Bonds

Key Takeaways Explain This Topic AI

Surety bonds are three-party agreements (principal, obligee, surety); insurance is a two-party contract.

The surety expects no loss because the principal must indemnify it for any claim paid.

Construction sequence: bid bond (signing), performance bond (completion), payment bond (subs/suppliers).

The Miller Act requires performance and payment bonds on federal jobs over $100,000.

Fidelity bonds protect employers from employee dishonesty and overlap ISO Commercial Crime coverage.

Last updated: June 2026

Surety and Fidelity Bonds

Bonds are tested heavily on the national P&C exam because candidates routinely confuse them with insurance. A surety bond is a three-party agreement, not a two-party insurance contract. The three parties are: the principal (the party who performs the obligation and buys the bond), the obligee (the party protected, who requires the bond), and the surety (the company that guarantees the principal's performance). Insurance, by contrast, has only two parties: insurer and insured.

The single most important exam distinction: in insurance the carrier expects losses and prices for them, but in surety the surety expects no loss because the principal must reimburse (indemnify) the surety for any claim the surety pays the obligee. This right of recovery is called subrogation against the principal and is the defining feature of suretyship.

Contract Surety Bonds

Construction contracts drive most surety volume, and three bond types appear in a typical project sequence:

Bond Purpose Trigger

Bid bond Guarantees the bidder will sign the contract and post final bonds if awarded Bidder refuses the awarded contract

Performance bond Guarantees the contractor completes the job per contract terms Contractor defaults/abandons work

Payment bond Guarantees subcontractors, laborers, and suppliers are paid Contractor fails to pay downstream parties

A maintenance bond extends protection after completion, guaranteeing workmanship for a stated period (often one to two years). On federal public-works projects over $100,000, the Miller Act mandates both performance and payment bonds; many states mirror this with Little Miller Acts for state/municipal work.

Bid Bond Worked Example

Bid bonds are usually expressed as a percentage of the bid amount (commonly 5% to 10%). Suppose a contractor submits a $2,000,000 bid backed by a 10% bid bond. The bond penalty (maximum surety exposure) is:

$2,000,000 x 10% = $200,000

If the contractor wins but refuses the contract and the obligee must re-let the work to the next bidder at $2,150,000, the obligee's extra cost is $150,000. The surety pays the lesser of the actual damages ($150,000) or the bond penalty ($200,000), so it pays $150,000 and then pursues the principal for reimbursement. Candidates often wrongly pick the full penalty; remember the penalty is a ceiling, not the payout .

Fidelity Bonds and Commercial Surety

Fidelity bonds are a different animal: they protect an employer against employee dishonesty (theft, embezzlement, forgery). Although called bonds, they function like insurance and overlap with the ISO Commercial Crime coverage form (Insuring Agreement 1, Employee Theft). The financial institution bond (formerly the Bankers Blanket Bond) covers banks for employee dishonesty plus on-premises/in-transit losses and forgery.

Commercial (miscellaneous) surety bonds cover non-construction obligations, including:

  • License and permit bonds - guarantee compliance with laws/ordinances
  • Public official bonds - guarantee faithful performance of office
  • Judicial bonds - fiduciary bonds (executors, guardians) and court bonds (appeal, bail)

Key trap: a license/permit bond protects the public or government, not the principal ; the principal still must repay the surety.

Underwriting and the General Indemnity Agreement

Surety underwriting evaluates the contractor's three C's: capital, capacity, and character . The surety reviews financial statements, work-on-hand backlog, and the contractor's track record before issuing bonds, treating the decision more like extending credit than insuring a risk. A contractor's total bonding capacity (the aggregate program ) limits how much work can be backed at once.

Before any bond is issued, the principal (and often its owners personally) signs a General Indemnity Agreement (GIA) . The GIA gives the surety the contractual right to be reimbursed, to demand collateral, and to take over and complete a defaulted project. This is why the surety expects no net loss: the GIA, plus the legal right of subrogation, lets it recover from the principal everything it pays the obligee, including legal and completion costs.

Performance Bond Payout Example

The penalty (or penal sum ) of a performance bond is normally set at 100% of the contract price . On a $1,200,000 contract with a 100% performance bond, the penal sum is $1,200,000 .

Assume the contractor completes $700,000 of work, then defaults. The surety steps in and pays a completion contractor $620,000 to finish the remaining scope that should have cost $500,000. The surety's loss is limited to the cost to complete in excess of the unpaid contract balance:

  • Unpaid contract balance still owed by owner: $1,200,000 - $700,000 = $500,000
  • Completion cost: $620,000
  • Surety net exposure: $620,000 - $500,000 = $120,000

This $120,000 is well under the $1,200,000 penal sum, and the surety then seeks indemnity from the principal.

Three-Party Surety vs. Two-Party Fidelity

The exam's core distinction: a surety bond has three parties — the principal (who must perform), the obligee (who is protected), and the surety (which guarantees performance). If the principal defaults, the surety pays the obligee and then seeks reimbursement from the principal (there is a right of recovery). A fidelity bond has effectively two parties and protects an employer against loss from employee dishonesty (theft, embezzlement); there is no expectation of recovery from the dishonest employee.

Contract and License Bond Types

Common surety bonds tested:

  • Bond Guarantees
  • Bid bond The bidder will enter the contract at the bid price if awarded
  • Performance bond The contractor will complete the project per specifications
  • Payment bond Subcontractors and suppliers will be paid
  • License/permit bond The principal will comply with laws/ordinances tied to a license
  • Fiduciary (court) bond An administrator/guardian will faithfully perform court duties

Fidelity coverage appears in the ISO Commercial Crime form as employee-theft insuring agreements, blurring the line with crime insurance.