Study guide

2.3 Coinsurance and the Coinsurance Formula

Vermont Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Vermont Property & Casualty Insurance Exam Overview

Vermont Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

Risk, Hazards, Perils, and the Law of Large Numbers Insurable Interest, Indemnity, and Other Insurance Principles Insurance Contract Law and Elements Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D — Coverage for Damage to Your Auto 7.2 Exclusions and Part E — Duties After an Accident or Loss 7.3 Part F — General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

Farm and Agricultural Coverage Commercial Umbrella and Excess Liability Professional Liability and Errors & Omissions Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Vermont P&C Insurance Regulation & Licensing

1.1 Vermont Department of Financial Regulation 1.2 Vermont P&C Producer Licensing Requirements 1.3 Vermont Producer Responsibilities & Ethics

22 Chapter 2: Vermont Property Insurance

2.1 Vermont Homeowners Insurance 2.2 Vermont Commercial Property Insurance

23 Chapter 3: Vermont Auto & Casualty Insurance

3.1 Vermont Auto Insurance Requirements 3.2 Vermont Liability & Workers' Compensation

24 Chapter 4: Vermont Ethics & Professional Conduct

4.1 Vermont Unfair Trade Practices 4.2 Vermont Professional Standards & Best Practices

2.3 Coinsurance and the Coinsurance Formula

Key Takeaways Explain This Topic AI

Coinsurance requires carrying a stated percentage (commonly 80/90/100%) of value; falling short makes the insured a co-insurer on every loss.

Formula: (Amount Carried / Amount Required) x Loss, where Amount Required = Value x Coinsurance %.

The penalty applies to partial losses; payment never exceeds the actual loss or the policy limit, then the deductible is subtracted.

The classic trap: apply the ratio, get a number above the limit, and forget to cap at the policy limit.

Agreed Value (CP 12 30) and Inflation Guard are the practical defenses against a coinsurance penalty.

Last updated: June 2026

Why Coinsurance Exists

Most property losses are partial , not total. Without a penalty for underinsurance, an owner would insure a $500,000 building for only $100,000, pay a small premium, and still recover nearly all partial losses — leaving the insurer underfunded for the true exposure. The coinsurance clause corrects this by requiring the insured to carry coverage equal to a stated percentage of the property's value (the coinsurance percentage ). If the insured carries less, they become a co-insurer and share in every loss.

Common coinsurance percentages on commercial property are 80%, 90%, and 100% . A higher percentage earns a lower rate, because higher insurance-to-value spreads premium more fairly.

The Coinsurance Formula Claim Payment = (Amount Carried / Amount Required) x Loss

  • Term Meaning
  • Amount Carried The policy limit actually purchased
  • Amount Required Property Value × Coinsurance %
  • Loss The actual amount of damage

Memory aid candidates use: "Did / Should × Loss." Two caps always apply afterward: the payment can never exceed the actual loss or the policy limit , whichever is less. The deductible is then subtracted from the formula result. If the insured met or exceeded the requirement, the ratio is capped at 100% — there is no bonus for over-insuring.

Three Worked Examples

Example 1 — Requirement met. Building value $500,000; coinsurance 80%; limit $400,000; loss $100,000.

Amount Required = $500,000 × 80% = $400,000 .

Ratio = $400,000 ÷ $400,000 = 100% .

Claim = 100% × $100,000 = $100,000 — full loss paid (less deductible).

Example 2 — Penalty. Same building, owner carries only $300,000 .

Amount Required = $400,000 ; Carried = $300,000.

Ratio = $300,000 ÷ $400,000 = 75% .

Claim = 75% × $100,000 = $75,000 . The insured absorbs a $25,000 penalty .

Example 3 — Loss exceeds the limit (the classic trap). Value $1,000,000; coinsurance 80%; limit $700,000; loss $900,000.

Required = $1,000,000 × 80% = $800,000 .

Ratio = $700,000 ÷ $800,000 = 87.5% .

Formula = 87.5% × $900,000 = $787,500 , but capped at the $700,000 policy limit — insurer pays $700,000 .

Avoiding the Penalty: Agreed Value, Inflation Guard, ITV

Insurance-to-Value (ITV) = Amount of Insurance ÷ Property Value. Reaching the coinsurance percentage avoids the penalty entirely.

  • Method How it helps Caveat
  • Carry adequate limits Insure to at least the required % Values drift; review annually

Agreed Value (CP 12 30) Suspends the coinsurance clause for the policy term Requires a signed Statement of Values; must be renewed

Inflation Guard Automatically raises the limit through the term Estimated rate may lag real inflation

Coinsurance vs. coordination of benefits: on the exam, "coinsurance" in property means the insurance-to-value penalty above. In health insurance, coinsurance means the insured's percentage share of covered costs after the deductible — do not confuse the two.

Coinsurance on Personal Lines and the 80% Rule

Homeowners forms apply the same logic through the building loss-settlement condition : insure the dwelling to at least 80% of replacement cost to settle building losses on a full replacement-cost basis. Carry less than 80% and the insurer pays the greater of the ACV of the damaged part or the formula amount (carried / (0.80 × RC value)) × loss .

Worked personal-lines example. A home costs $400,000 to rebuild. The owner insures it for $280,000 (only 70% of RC). A kitchen fire causes $40,000 of damage.

Required = $400,000 × 80% = $320,000 .

Ratio = $280,000 ÷ $320,000 = 87.5% .

Formula payment = 87.5% × $40,000 = $35,000 (the insured eats $5,000), assuming that exceeds the ACV alternative.

This is why agents push inflation guard and periodic replacement-cost re-estimates: construction inflation silently pushes the home below the 80% threshold between renewals.

Coinsurance on Business Income and Blanket Limits

Coinsurance also appears outside direct property. On business income , the coinsurance percentage (often 50%, 60%, 70%, 80%, etc.) is applied to the 12-month income the business would have earned, not to building value — so the basis of the calculation changes even though the penalty math is identical.

A blanket limit covers multiple buildings or locations under one limit. To qualify, the insured signs a Statement of Values ; coinsurance is then applied to the total values of all covered property. Underreporting on the statement triggers a margin clause or coinsurance penalty across the blanket, so accurate values matter even more than on a single-location specific limit.

A Step-by-Step Penalty Worked Example

Apply the formula (Did ÷ Should) × Loss − Deductible = Payment , capped at the limit. Suppose a building worth $500,000 carries an 80% coinsurance clause, so the insured should carry $400,000 . The insured actually carries only $300,000 and suffers a $100,000 loss with a $1,000 deductible.

  • Ratio: $300,000 ÷ $400,000 = 0.75
  • Apply to loss: 0.75 × $100,000 = $75,000

Subtract deductible: $75,000 − $1,000 = $74,000 paid ; the insured absorbs the $26,000 penalty for underinsuring.

Had the insured carried the full $400,000, the ratio would be 1.0 and the insurer would pay $99,000.