Study guide
Radiographic Production, Patient Positioning, and Documentation for Quality Images
Veterinary Technician National Examination VTNE
Track your progress as you read
Finished sections get a check mark.
1 Pharmacology Foundations and Drug Classifications
Drug Classifications: Controlled Substance Schedules, Mechanism-Based Categories, and Therapeutic Classes Pharmacokinetics: Drug Absorption, Distribution, Metabolism, and Excretion (ADME) Drug Side Effects, Adverse Reactions, Contraindications, and Drug-Drug Interactions
2 Dosage Calculations and Fluid Therapy
Dosage Calculations: mg/kg to Volume, Body Surface Area, and Metric System Conversions Fluid Therapy Rate Calculations and Continuous Rate Infusions (CRIs)
3 Medication Preparation, Dispensing, and Controlled Substances
Medication Preparation, Compounding, and Dispensing per Veterinarian Orders Controlled Drug Inventory, Logbooks, Legal Compliance, Storage, Handling, and Safe Disposal
4 Surgical Preparation and Sterile Technique
Surgical Anatomy and Pathophysiology for Perioperative Planning Surgical Environment, Equipment, and Instrument Preparation Patient Preparation: Clipping, Surgical Scrub, Draping, and Positioning Sterile Surgical Technician Role: Gowning, Gloving, and Sterile Field Maintenance
5 Instrument Processing and Aseptic Maintenance
Circulating (Non-Sterile) Technician Role, Instrument Accountability, and Count Reconciliation Instrument Cleaning Methods: Manual, Soak, and Ultrasonic Sterilization Methods, Aseptic Technique, and Surgical Suite Maintenance
6 Veterinary Dentistry
Dental Anatomy, Pathophysiology, and the Triadan Tooth-Numbering System Dental Equipment, Instruments, and Maintenance Comprehensive Oral Health Assessment and Treatment (COHAT): Scaling, Polishing, Charting, and Periodontal Assessment Dental Radiography: Positioning, Exposure, Safety, and Interpretation
7 Specimen Handling and Hematology
Specimen Collection, Preparation, Handling, Storage, and Shipping for In-House and Reference Labs Hematology: CBC Interpretation, Blood Smear Preparation, and Manual Cell Counting Cytology and Serology Procedures and Interpretation
8 Clinical Chemistry, Urinalysis, Parasitology, and Lab Quality
Clinical Chemistry, Urinalysis, Parasitology, and Microbiology Procedures Laboratory Equipment Maintenance, Calibration, Controls, and Quality Assurance
9 Patient Evaluation, Assessment, and Environment
Patient Anatomy, Physiology, and Pathophysiology for Nursing Care Initial and Ongoing Patient Evaluation: Physical Exam, Mentation, TPR, and Documentation Clinical Diagnostic Procedures: Blood Pressure Measurement, Electrocardiography, and Tonometry Safe, Sanitary, and Comfortable Environment: Housing, Hygiene, and Infection Control
10 Nursing Procedures and Treatments
Catheterization Techniques: IV, Urinary, and Feeding Tube Placement and Maintenance Wound Management and Bandaging Techniques Medication Administration: Routes (Topical, IV, SQ, IM, Oral) and Techniques
11 Specimens, Behavior, Restraint, and Equipment
Specimen Collection for In-House and Outside Laboratory Evaluation Animal Behavior Recognition and Appropriate Response Safe Animal Handling and Restraint With and Without Equipment
12 Diagnostic Imaging and Radiation Safety
Imaging Anatomy and Pathophysiology for Radiographic Interpretation Radiographic Production, Patient Positioning, and Documentation for Quality Images Imaging Equipment Maintenance, ALARA Principles, and Radiation Safety Protocols
13 Anesthesia Foundations and Planning
13.1 Anesthesia Anatomy, Physiology, and Pathophysiology 13.2 Anesthetic Plan Development and Pre-anesthetic Assessment and Care 13.3 Anesthetic Medications: Pharmacology, Reactions, Contraindications, and Interactions
14 Anesthetic Equipment and Airway Management
Anesthetic Machine Preparation, Leak Testing, and Equipment Maintenance for Reliable Operation Endotracheal Intubation: Technique, Airway Management, and Troubleshooting
15 Anesthesia Monitoring and Recovery
Anesthesia Monitoring: Pre-Anesthetic, Peri-Operative, and Post-Operative Stages (EtCO2, SpO2, HR, BP, Temperature) Anesthesia Troubleshooting, Recovery Assessment, and Post-Anesthetic Care
16 Emergency Medicine and Critical Care
Emergency Anatomy, Pathophysiology, and Triage Prioritization Emergency Nursing Procedures: RECOVER CPR, Acute Blood Loss Control, and Fracture Stabilization Critical Care Nursing: Blood Component Therapy, Fluid Resuscitation, and Ongoing Oxygen Therapy Ongoing Patient Evaluation in Emergency and Critical Conditions
17 Pain Management and Analgesia
Pain Anatomy, Physiology, and Pathophysiology Foundations Pain Recognition and Assessment: Scoring Scales and Species-Specific Behavioral Indicators Multimodal Pain Management Plans: Analgesic Selection, Contraindications, and Implementation Analgesic Administration Techniques and Reassessment Cadence
18 Communication and Veterinary Professional Support Services
Client education: animal care, risks, side effects, preventative care, and zoonosis Professional communication, ethics, veterinary team interactions, and record keeping Patient information collection, signs of animal abuse, and euthanasia assistance (consent, aftercare, grief management)
Radiographic Production, Patient Positioning, and Documentation for Quality Images
Key Takeaways Explain This Topic AI
The exposure triangle is kVp (penetration and contrast), mAs (image density/exposure), and SID (source-to-image distance); use a grid when tissue thickness exceeds 10 cm to clean up scatter.
The standard thoracic series is at least right lateral plus VD or DV (two orthogonal views); for metastasis screening use the three-view thorax (right lateral, left lateral, and VD).
Beam centering, tight collimation, and anatomically correct positioning directly determine diagnostic value — a rotated pelvis or obliqued thorax can hide or mimic pathology.
Every radiograph must have patient ID, date, L/R marker placed outside the primary beam on the side of interest, and a position label (R Lat, L Lat, VD, DV).
Last updated: July 2026
The Exposure Triangle: kVp, mAs, SID
Three primary variables determine radiographic exposure and image quality.
kilovoltage peak (kVp)
kVp sets the maximum energy of the x-ray beam and therefore its penetrating power and contrast . Higher kVp gives shorter-scale contrast (more shades of gray, less black-and-white) because more scatter reaches the receptor; lower kVp gives long-scale (high) contrast. The 15% rule: increasing kVp by 15% and halving mAs keeps exposure constant while lowering patient dose.
milliampere-seconds (mAs)
mAs (tube current × time) controls the quantity of x-rays produced and therefore the overall image density. Doubling mAs roughly doubles image density; halving mAs darkens underexposed film or, on digital, increases noise. mAs primarily affects brightness/density; kVp primarily affects contrast and penetration.
Source-to-Image Distance (SID)
SID follows the inverse-square law: doubling SID quarters the beam intensity. Most small-animal radiography uses a fixed 40-inch (100 cm) SID. If SID changes, mAs must be adjusted by the formula mAs2 = mAs1 × (SID2/SID1)² to maintain constant exposure.
Grids for Tissue >10 cm
For body parts thicker than ~10 cm (canine abdomen, large canine thorax), scatter radiation degrades contrast. A grid (focused or parallel, ratio 6:1 to 12:1) is placed between the patient and the receptor to absorb scatter. Use of a grid requires a technique chart entry with higher mAs (often 2–3× non-grid technique) because the grid also absorbs some primary beam. The Bucky factor indicates how much to increase exposure.
Technique Charts
A technique chart is a table of kVp and mAs indexed by body part and patient thickness (or weight). VTNE-relevant points:
Charts are calibrated for a specific SID, grid, and receptor system — change any of those and the chart must be re-calibrated.
kVp typically scales with tissue thickness (about +2 kVp per cm of abdomen, +1–2 kVp per cm of thorax).
For digital (CR/DR), kVp can be pushed higher and mAs lowered to reduce patient dose; the image processor corrects density.
Always check the chart before exposure — guessing leads to retakes (which double patient and staff radiation dose).
- Patient Positioning and the Thoracic Series
- Principles of Positioning
The area of interest must be closest to the receptor (the anode-heel effect and patient thickness reduce detail on the tube side).
Center the beam on the anatomic point of interest , not the middle of the patient; this keeps anatomy from being distorted by the divergent beam.
Keep the part parallel to the receptor to avoid foreshortening.
Use positioning aids (troughs, foam wedges, sandbags) — never use staff to hold a position when sedation or a restraint device will do.
The Thoracic Series
At minimum, the thorax needs two orthogonal views : a lateral and either a VD or DV. Standard practice for thorough evaluation (e.g., pulmonary metastasis screening, cardiac assessment) uses the three-view thorax :
Right lateral — left lung lobes are dependent (closer to receptor), showing the left cranial and caudal lobes best.
Left lateral — right lobes are dependent, best shown.
VD or DV — differentiates left vs right, shows cardiac silhouette and pulmonary vasculature symmetrically.
VD vs DV : VD (patient in dorsal recumbency, beam goes ventral→dorsal) is used for cardiac assessment and most routine thoracic work. DV (sternal recumbency, beam dorsal→ventral) is preferred for dyspneic patients because sternal recumbency preserves ventilation better, and for evaluating the caudal lung lobes because the heart falls away from the diaphragm.
Oblique views may be added to profile specific lung lobes or rib lesions.
Abdominal Positioning
Lateral : patient in right lateral recumbency; center beam at the level of the 13th rib (cranial abdomen) or umbilicus (full abdomen). Include diaphragm through the coxofemoral joint.
VD : patient in dorsal recumbency; beam centered mid-abdomen. Padded troughs stabilize the patient.
For pneumocystography or positive cystography, the bladder is centered.
Orthopedic Positioning Essentials
Pelvis (ventrodorsal hip-extended view): limbs extended parallel, patellae centered over the trochlea, femurs not rotated; the pelvis must be perfectly symmetrical — asymmetry between the obturator foramina or coxofemoral joints indicates rotation and invalidates joint measurements.
Stifle : lateral view with stifle flexed 90°, femoral condyles superimposed; caudocranial view with limb extended.
Elbow : true lateral with elbow flexed 90°; craniocaudal with limb extended.
Always include the joint above and below a long-bone fracture.
Beam Centering, Collimation, and the Anode-Heel Effect
Center the beam on the anatomy of interest; use a ruler to set SID consistently.
Collimate tightly to the area of interest — collimation reduces scatter (improving contrast), lowers patient dose, and protects staff by limiting the irradiated volume. Never use a collimation field larger than the receptor.
The anode-heel effect : the cathode side of the beam has higher intensity than the anode side. Align the cathode with the thicker/denser part of the patient (e.g., the abdomen caudal end on a lateral thoraco-abdominal study) for more even exposure.
Documentation and Labeling
Every diagnostic radiograph must be unambiguously identifiable.
- Required label Placement/notes
- Patient ID + owner name Burned in or digital metadata; never hand-written only
- Date/time Digital metadata or printed on the film
- L/R marker Placed on the side of interest , outside the primary beam where possible
- Position label R Lat, L Lat, VD, DV, oblique degree/direction
- Hospital/clinic ID Per state radiation safety regulations
Markers must be placed before exposure — adding a marker afterward is a documentation failure. On digital systems, the L/R marker is burned in at acquisition, not added in post-processing.
Quality Pitfalls and the Retake
Common retake causes and their fixes:
Too dark/too light : wrong mAs; check technique chart and patient thickness measurement.
Poor contrast (gray, washed out): too high kVp, no grid when one was needed, or grid cutoff from off-center/off-focus alignment.
Motion blur : too long exposure time (high mAs with low mA); increase mA, decrease time, or sedate the patient.
Rotation (asymmetric pelvis, tilted thorax): reposition and re-shoot — never accept a rotated study for orthopedic measurements.
Each retake doubles radiation dose to patient and staff. The cheapest fix is to position and expose correctly the first time.