Study guide

Fluid Therapy Rate Calculations and Continuous Rate Infusions (CRIs)

Veterinary Technician National Examination VTNE

Track your progress as you read

Finished sections get a check mark.

1 Pharmacology Foundations and Drug Classifications

Drug Classifications: Controlled Substance Schedules, Mechanism-Based Categories, and Therapeutic Classes Pharmacokinetics: Drug Absorption, Distribution, Metabolism, and Excretion (ADME) Drug Side Effects, Adverse Reactions, Contraindications, and Drug-Drug Interactions

2 Dosage Calculations and Fluid Therapy

Dosage Calculations: mg/kg to Volume, Body Surface Area, and Metric System Conversions Fluid Therapy Rate Calculations and Continuous Rate Infusions (CRIs)

3 Medication Preparation, Dispensing, and Controlled Substances

Medication Preparation, Compounding, and Dispensing per Veterinarian Orders Controlled Drug Inventory, Logbooks, Legal Compliance, Storage, Handling, and Safe Disposal

4 Surgical Preparation and Sterile Technique

Surgical Anatomy and Pathophysiology for Perioperative Planning Surgical Environment, Equipment, and Instrument Preparation Patient Preparation: Clipping, Surgical Scrub, Draping, and Positioning Sterile Surgical Technician Role: Gowning, Gloving, and Sterile Field Maintenance

5 Instrument Processing and Aseptic Maintenance

Circulating (Non-Sterile) Technician Role, Instrument Accountability, and Count Reconciliation Instrument Cleaning Methods: Manual, Soak, and Ultrasonic Sterilization Methods, Aseptic Technique, and Surgical Suite Maintenance

6 Veterinary Dentistry

Dental Anatomy, Pathophysiology, and the Triadan Tooth-Numbering System Dental Equipment, Instruments, and Maintenance Comprehensive Oral Health Assessment and Treatment (COHAT): Scaling, Polishing, Charting, and Periodontal Assessment Dental Radiography: Positioning, Exposure, Safety, and Interpretation

7 Specimen Handling and Hematology

Specimen Collection, Preparation, Handling, Storage, and Shipping for In-House and Reference Labs Hematology: CBC Interpretation, Blood Smear Preparation, and Manual Cell Counting Cytology and Serology Procedures and Interpretation

8 Clinical Chemistry, Urinalysis, Parasitology, and Lab Quality

Clinical Chemistry, Urinalysis, Parasitology, and Microbiology Procedures Laboratory Equipment Maintenance, Calibration, Controls, and Quality Assurance

9 Patient Evaluation, Assessment, and Environment

Patient Anatomy, Physiology, and Pathophysiology for Nursing Care Initial and Ongoing Patient Evaluation: Physical Exam, Mentation, TPR, and Documentation Clinical Diagnostic Procedures: Blood Pressure Measurement, Electrocardiography, and Tonometry Safe, Sanitary, and Comfortable Environment: Housing, Hygiene, and Infection Control

10 Nursing Procedures and Treatments

Catheterization Techniques: IV, Urinary, and Feeding Tube Placement and Maintenance Wound Management and Bandaging Techniques Medication Administration: Routes (Topical, IV, SQ, IM, Oral) and Techniques

11 Specimens, Behavior, Restraint, and Equipment

Specimen Collection for In-House and Outside Laboratory Evaluation Animal Behavior Recognition and Appropriate Response Safe Animal Handling and Restraint With and Without Equipment

12 Diagnostic Imaging and Radiation Safety

Imaging Anatomy and Pathophysiology for Radiographic Interpretation Radiographic Production, Patient Positioning, and Documentation for Quality Images Imaging Equipment Maintenance, ALARA Principles, and Radiation Safety Protocols

13 Anesthesia Foundations and Planning

13.1 Anesthesia Anatomy, Physiology, and Pathophysiology 13.2 Anesthetic Plan Development and Pre-anesthetic Assessment and Care 13.3 Anesthetic Medications: Pharmacology, Reactions, Contraindications, and Interactions

14 Anesthetic Equipment and Airway Management

Anesthetic Machine Preparation, Leak Testing, and Equipment Maintenance for Reliable Operation Endotracheal Intubation: Technique, Airway Management, and Troubleshooting

15 Anesthesia Monitoring and Recovery

Anesthesia Monitoring: Pre-Anesthetic, Peri-Operative, and Post-Operative Stages (EtCO2, SpO2, HR, BP, Temperature) Anesthesia Troubleshooting, Recovery Assessment, and Post-Anesthetic Care

16 Emergency Medicine and Critical Care

Emergency Anatomy, Pathophysiology, and Triage Prioritization Emergency Nursing Procedures: RECOVER CPR, Acute Blood Loss Control, and Fracture Stabilization Critical Care Nursing: Blood Component Therapy, Fluid Resuscitation, and Ongoing Oxygen Therapy Ongoing Patient Evaluation in Emergency and Critical Conditions

17 Pain Management and Analgesia

Pain Anatomy, Physiology, and Pathophysiology Foundations Pain Recognition and Assessment: Scoring Scales and Species-Specific Behavioral Indicators Multimodal Pain Management Plans: Analgesic Selection, Contraindications, and Implementation Analgesic Administration Techniques and Reassessment Cadence

18 Communication and Veterinary Professional Support Services

Client education: animal care, risks, side effects, preventative care, and zoonosis Professional communication, ethics, veterinary team interactions, and record keeping Patient information collection, signs of animal abuse, and euthanasia assistance (consent, aftercare, grief management)

Fluid Therapy Rate Calculations and Continuous Rate Infusions (CRIs)

Key Takeaways Explain This Topic AI

Maintenance fluid rates are 2-3 mL/kg/hr for dogs and 1-2 mL/kg/hr for cats; multiply by body weight (kg) to get mL/hr, then by 24 for the daily total.

Dehydration deficit (mL) = % dehydration × body weight (kg) × 1000; add the deficit (spread over 12-24 hr) to the maintenance rate to get the total hourly rate.

Drop rate (gtt/min) = (mL/hr × drop factor [gtt/mL]) ÷ 60; the drop factor is printed on the IV set packaging (10, 15, or 60 gtt/mL).

CRI doses are expressed as mcg/kg/hr, mg/kg/hr, or mg/kg/min — read the time unit carefully because propofol is dosed per minute while most analgesics are per hour.

For drug-in-bag CRIs, calculate total hours the bag will last (bag volume ÷ fluid rate), multiply by the dose per hour to get total drug needed, then divide by drug concentration to get the volume to add to the bag.

Last updated: July 2026

Fluid Therapy Rate Calculations and CRIs

Fluid therapy is one of the highest-yield calculation topics on the VTNE because every technician in practice runs fluids. This section covers maintenance rates, dehydration deficit replacement, drop rate from a gravity set, and continuous rate infusions (CRIs) for analgesic and anesthetic drugs.

Maintenance Fluid Rates

Maintenance fluid is the volume a healthy animal needs per day to replace insensible losses (respiration, urine, feces). The standard VTNE-taught rates are:

  • Dogs: 2-3 mL/kg/hr (≈ 50-65 mL/kg/day)
  • Cats: 1-2 mL/kg/hr (≈ 25-50 mL/kg/day)

Cats have a slightly lower maintenance requirement per kg than dogs. The mid-range value (2.5 mL/kg/hr for dogs, 1.5 mL/kg/hr for cats) is a safe default when the veterinarian does not specify.

Maintenance Worked Example (Dog)

A 25 kg dog needs maintenance IV fluids. Calculate mL/hr.

  • Step 1: Choose rate. 2.5 mL/kg/hr (mid-range for dogs)
  • Step 2: Multiply by weight. 2.5 mL/kg/hr × 25 kg = 62.5 mL/hr

Answer: 62.5 mL/hr.

For the daily total: 62.5 mL/hr × 24 hr = 1500 mL/day.

Maintenance Worked Example (Cat)

A 4 kg cat needs maintenance fluids. Calculate mL/hr.

1.5 mL/kg/hr × 4 kg = 6 mL/hr

Daily: 6 mL/hr × 24 hr = 144 mL/day.

Dehydration Deficit Calculation

Sick patients often present dehydrated. The fluid deficit is:

Deficit (mL) = % dehydration × body weight (kg) × 1000

The % dehydration is estimated from physical exam (skin tent, mucous membranes, capillary refill, sunken eyes). Common estimates: 5% (mild), 6-8% (moderate), 10-12% (severe).

Deficit Worked Example

A 10 kg dog is assessed at 6% dehydration. What is the fluid deficit?

0.06 × 10 kg × 1000 = 600 mL

Answer: 600 mL deficit.

The deficit is typically replaced over 12-24 hours (the veterinarian decides), in addition to ongoing maintenance.

Combined Maintenance + Deficit Rate

The total fluid rate is the maintenance rate plus the deficit-replacement rate.

Combined Worked Example

A 10 kg dog is 6% dehydrated. The veterinarian wants the deficit replaced over 24 hours plus maintenance. Calculate the total mL/hr.

  • Step 1: Calculate deficit. 0.06 × 10 × 1000 = 600 mL
  • Step 2: Deficit per hour. 600 mL ÷ 24 hr = 25 mL/hr
  • Step 3: Maintenance per hour. 2.5 mL/kg/hr × 10 kg = 25 mL/hr
  • Step 4: Add them. 25 + 25 = 50 mL/hr

Answer: 50 mL/hr. This is what you set on the fluid pump.

Drop Rate (Gravity Drip) Calculation

When fluids run by gravity (no pump), you set the rate by counting drops per minute in the drip chamber. The formula is:

gtt/min = (mL/hr × drop factor [gtt/mL]) ÷ 60

The drop factor is printed on the IV set packaging. Common sets:

  • Set type Drop factor
  • Macrodrip (standard adult) 10, 15, or 20 gtt/mL
  • Microdrip (pediatric) 60 gtt/mL
  • Drop Rate Worked Example

You are delivering 120 mL/hr through a 15 gtt/mL macrodrip set on a surgical patient. What is the drip rate in gtt/min?

  • gtt/min = (120 mL/hr × 15 gtt/mL) ÷ 60
  • gtt/min = 1800 ÷ 60 = 30 gtt/min

Answer: 30 drops per minute — roughly one drop every 2 seconds.

Microdrip Worked Example

A 4 kg cat is on 6 mL/hr maintenance through a 60 gtt/mL microdrip set. Calculate gtt/min.

gtt/min = (6 × 60) ÷ 60 = 6 gtt/min

Answer: 6 drops per minute — one drop every 10 seconds.

Continuous Rate Infusion (CRI) Dosing

A CRI delivers a drug continuously at a fixed dose per unit time, usually expressed as mcg/kg/hr , mg/kg/hr , or occasionally mg/kg/min . CRIs are used for analgesia (fentanyl, morphine, ketamine, lidocaine, dexmedetomidine) and for chemical sedation (propofol).

There are two delivery methods:

Syringe pump — the drug is delivered neat and the pump is programmed in mL/hr.

Drug added to a fluid bag — the drug is diluted into a bag of carrier fluid and the bag runs at a set fluid rate.

Syringe Pump Worked Example: Fentanyl CRI

A 20 kg dog needs a fentanyl CRI at 5 mcg/kg/hr. Fentanyl is supplied as 50 mcg/mL. The CRI runs via syringe pump.

  • Step 1: Calculate the dose per hour. 5 mcg/kg/hr × 20 kg = 100 mcg/hr
  • Step 2: Convert to mL/hr using concentration. 100 mcg/hr ÷ 50 mcg/mL = 2 mL/hr

Answer: Set the syringe pump to 2 mL/hr.

Drug-in-Bag CRI Worked Example: Morphine

A 10 kg dog needs a morphine CRI at 0.1 mg/kg/hr delivered in a 250 mL bag of LRS running at 10 mL/hr. Morphine is supplied as 10 mg/mL. How many mL of morphine do you add to the bag?

  • Step 1: Calculate the dose per hour. 0.1 mg/kg/hr × 10 kg = 1 mg/hr
  • Step 2: Calculate how many hours the bag will last. 250 mL ÷ 10 mL/hr = 25 hr
  • Step 3: Calculate total drug needed for the whole bag. 1 mg/hr × 25 hr = 25 mg
  • Step 4: Calculate the volume of morphine to add. 25 mg ÷ 10 mg/mL = 2.5 mL

Answer: Add 2.5 mL of morphine (10 mg/mL) to the 250 mL bag and run at 10 mL/hr. Many clinics first withdraw 2.5 mL of fluid from the bag so the final volume stays 250 mL — know your clinic's policy.

Common CRI Drugs and Typical Doses

  • Drug Typical CRI dose Units
  • Fentanyl 2-5 mcg/kg/hr
  • Morphine 0.1-0.5 mg/kg/hr
  • Ketamine 0.1-0.6 mg/kg/hr
  • Lidocaine (dog) 1-2 mg/kg/hr
  • Dexmedetomidine 0.5-2 mcg/kg/hr
  • Propofol 0.1-0.4 mg/kg/min
  • The Propofol Time-Unit Trap

Notice propofol is dosed per minute , not per hour. This is the most common CRI unit trap on the VTNE. If a 20 kg dog gets propofol at 0.2 mg/kg/min:

  • 0.2 mg/kg/min × 20 kg = 4 mg/min
  • 4 mg/min × 60 min = 240 mg/hr

If you forget to multiply by 60, your answer is off by a factor of 60 — a dosing error that would cause either massive underdosing or a fatal overdose. Always read the time unit on the order before calculating.

Fluid Therapy Calculation Checklist

Identify the rate type: maintenance only, deficit only, or maintenance + deficit.

Confirm units: mL/kg/hr for maintenance, % for dehydration, mcg or mg for CRI dose.

For CRIs, read the time unit: per hour or per minute.

For gravity sets, know the drop factor before calculating gtt/min.

For drug-in-bag CRIs, calculate bag duration first, then total drug, then volume to add.

Always double-check whether the answer is mL/hr, mL/day, gtt/min, or mL of drug to add — the VTNE frequently asks for the wrong-shaped unit as a trap.