Study guide

Transfers, Ambulation, and Fall Prevention Workflow

Washington CNA / NAC Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: Current Washington NAC Process, Training, and Exam Map

1.1 Official NAC Name and Washington CNA Search Language 1.2 Agency Roles: DOH, WABON, DSHS, and Credentia 1.3 Approved Training and the 108-Hour Minimum 1.4 Current Two-Part Exam Flow: Skills First, Knowledge Next 1.5 Formats, Fees, Language Options, and Results Basics 1.6 From First Step to Certification

2 Eligibility Routes, Applications, Authorization, and Registry Rules

2.1 Routine E1 Washington Program Route 2.2 Education, Military, and Out-of-State Routes E2-E4 2.3 Lapsed, Bridge, Older Training, OBRA, and Closed Program Routes E5-E9 2.4 Applications, Authorization to Test, and Credential Number Accuracy 2.5 NAR Versus NAC and the Nursing Home Four-Month Rule 2.6 OBRA Registry, Reactivation, Lapsed Status, and Delay Prevention

3 Knowledge Exam Format, Oral Option, Outline, and Study Strategy

Written Knowledge Exam Structure Oral Option and Language Access October 2024 NNAAP Knowledge Outline and Domain Weights Timing, Pacing, and Multiple-Choice Strategy Results, Retakes, and Attempt Rules Study Plan and Review Method

4 Activities of Daily Living: Hygiene, Grooming, Nutrition, Elimination, and Comfort

ADL Domain Overview and Resident-Centered Care Hygiene, Bathing, Oral Care, and Skin Observation Dressing, Grooming, and Personal Appearance Nutrition, Hydration, and Feeding Assistance Elimination, Toileting, Continence, and Perineal Care Rest, Sleep, Comfort, and Positioning

5 Chapter 5: Basic Nursing Skills, Infection Control, Safety Procedures, and Reporting

5.1 Basic Nursing Skills Domain Map and Exam Priorities 5.2 Infection Control, Hand Hygiene, and Standard Precautions 5.3 Safety, Falls, Fire, and Emergency Response 5.4 Vital Signs, Measurements, and Technical Procedures 5.5 Data Collection, Observation, and Change Reporting 5.6 Documentation, Delegation Boundaries, and Shift Communication

6 Chapter 6: Self-Care, Independence, Restorative Care, Mobility, and Rehabilitation Support

6.1 Self-Care and Independence Domain Map 6.2 Promoting Independence Without Unsafe Over-Helping 6.3 Restorative Care Goals, Prevention, and Maintenance 6.4 Mobility, Ambulation, and Assistive Devices 6.5 Range of Motion, Positioning, and Contracture Prevention 6.6 Rehabilitation Support, Motivation, and Progress Reporting

7 Psychosocial Care: Emotional, Mental, Spiritual, and Cultural Needs

7.1 Psychosocial Care Exam Scope and Care Priorities 7.2 Emotional Needs: Anxiety, Depression, Loneliness, and Grief 7.3 Dementia, Confusion, Delirium, and Behavior Support 7.4 End-of-Life Comfort, Loss, and Family Presence 7.5 Spiritual and Cultural Needs Without Assumptions 7.6 Communicating With Distressed Residents and Reporting Changes

8 Role of the Nurse Aide: Communication, Rights, Legal, Ethical, and Teamwork

8.1 Role Domain Overview and Washington NAC Boundaries 8.2 Therapeutic Communication With Residents, Families, and Staff 8.3 Resident/Client Rights: Privacy, Choice, and Confidentiality 8.4 Legal and Ethical Behavior: Abuse, Neglect, and Scope 8.5 Delegation, Assignments, Documentation, and Reporting Boundaries 8.6 Professional Teamwork, Conflict, and Safe Priorities

9 Washington Skills Test Process, Critical Elements, and 22 Testable Skills

Current Washington Skills Administration Map Using the 22 Testable Skills as Checklist Context Critical Elements and Total Step Standards Verbal Correction and Communication Strategy Measurement Skills and Recording Accuracy Skills Readiness Plan and Test-Day Boundaries

10 Skills Practice Workflows: Hand Hygiene, Body Mechanics, Transfers, and Measurements

Opening and Closing Workflow for Every Skill Hand Hygiene and Infection Control Workflow Body Mechanics, Bed Mobility, and Positioning Transfers, Ambulation, and Fall Prevention Workflow Measurements: Intake, Output, Vitals, and Recording Practice Circuits, Remediation, and Test-Ready Habits

11 Online Exam Day, Test Center Policies, Identification, Results, and Retakes

11.1 Knowledge Exam Day Map 11.2 Identification, Account Information, and Authorization 11.3 Rescheduling, Canceling, and No-Show Rules 11.4 Test Center Conduct, Accommodations, and Language Options 11.5 Score Reports, Results, and Next Steps 11.6 Retakes, Four-Attempt Rule, and Remediation

12 Final Review, Mixed Scenarios, Remediation, and First Job Readiness

12.1 Final Week Review Plan 12.2 Mixed Domain Scenario Drills 12.3 Missed-Question Log and Remediation 12.4 Skills Debrief Into Knowledge Readiness 12.5 First Job Readiness and Safe Boundaries 12.6 Final Mixed Rehearsal and Exam Readiness Check

Transfers, Ambulation, and Fall Prevention Workflow

Key Takeaways Explain This Topic AI

For a bed-to-chair gait-belt transfer: lock the bed, position the wheelchair toward the resident's stronger side touching the bed, lock the wheelchair brakes, and apply nonskid footwear before standing.

Apply the gait belt snugly over clothing (about two fingers should fit underneath), grasp it with both hands palms-up from underneath, brace your knees against the resident's, and count to three to stand and pivot.

A full-body mechanical lift is used when the resident cannot bear any weight; it requires at least two staff, a sling from shoulders to buttocks, and loops attached at equal lengths on each side.

Ambulation requires nonskid footwear, a gait belt, a clear path, walking on the resident's weaker side, and stopping immediately for dizziness or weakness.

If a resident starts to fall, ease them to the floor along your body using the gait belt rather than trying to hold them upright.

Last updated: June 2026

Bed-To-Chair Transfer With A Gait Belt

Transfers are high-attention skills because a fall can happen in a second. The standing pivot transfer with a gait belt is the most commonly tested transfer, and its steps are tightly sequenced. The gait belt (transfer belt) is a safety device that gives you a secure place to grip without pulling on the resident's arms or under their arms.

Lock the bed brakes and raise the head of the bed so the resident can sit up. Assist the resident to a seated position on the edge of the bed and let them dangle their feet for a few minutes to prevent dizziness from a sudden position change.

Apply nonskid footwear before any weight-bearing.

Position the wheelchair toward the resident's stronger side , at a slight angle, with the chair touching the bed; remove or swing away the footrests.

Lock the wheelchair brakes — an unlocked wheelchair that rolls away during the transfer is a classic cause of falls and an automatic failure.

Apply the gait belt snugly over clothing at the waist; you should be able to slip about two fingers underneath. It must be snug because it loosens and rides up as the resident stands.

Brace your knees and feet in front of the resident's to keep their feet from sliding; ask if they feel dizzy.

Grasp the gait belt on both sides with both hands, palms and fingertips pointing up (an underhand grip), count to three , and rock the resident to standing as they push off the bed.

Pivot your whole body toward the chair; when the resident's legs touch the seat, have them reach back for the armrests, then lower them with control.

Reposition in the chair, replace footrests, remove the gait belt, and complete the closing steps.

Mechanical Lift And Ambulation

When a resident cannot bear any of their own weight , a standing pivot transfer is unsafe — use a full-body mechanical (hydraulic) lift instead. The mechanical lift has its own critical safety points.

  • Mechanical lift step Why it matters
  • Use at least two trained staff One operates the lift, one guides the resident
  • Position the sling from shoulders to buttocks on the lift sheet Distributes weight and supports the trunk
  • Attach top and bottom loops at equal lengths each side Keeps the resident balanced and level
  • Widen the lift base and lock wheelchair brakes Prevents tipping; secures the landing surface
  • Raise only until the resident clears the bed Avoids unnecessary height and swinging
  • Guide, do not push, the suspended resident Prevents the sling from contacting hard parts

For ambulation , the resident wears nonskid footwear and a gait belt. Clear the path of obstacles, lower the bed, and lock equipment. Walk on the resident's weaker (affected) side , slightly behind, holding the gait belt at the back with an underhand grip. Match the resident's pace and watch their face, posture, and breathing. Use any assistive device (walker, cane) exactly as taught — a cane is held on the stronger side and advanced with the weaker leg.

Fall Prevention And A Beginning Fall

Fall prevention is a workflow that begins before the resident stands and continues until they are safely seated or back in bed. The biggest single judgment is what to do when a resident begins to fall . Do not try to hold the resident upright or catch them — that injures both of you. Instead, keep a firm hold on the gait belt, widen your stance, and ease the resident down the front of your body to the floor , protecting their head and bending your knees as you lower. Then stay with the resident, call for help, and report; never move a fallen resident before the nurse assesses them.

If a resident reports dizziness, weakness, shortness of breath, or chest pain during a transfer or walk, stop the activity and lower or seat them safely , then report — do not push on because the checklist has more steps. Critical Element Steps in these skills almost always include locking equipment, applying the gait belt and nonskid footwear, and maintaining safe support. Missing one fails the skill, but you still need the full sequence and enough total steps to pass.

Orthostatic Hypotension And Common Transfer Errors

The reason you let a resident dangle their legs at the bedside before standing is orthostatic (postural) hypotension: when a person who has been lying down sits or stands quickly, blood pools in the legs, blood pressure drops, and they can become lightheaded and fall. Dangling for a few minutes lets the circulation adjust, and asking about dizziness before the stand is a real safety check, not a formality.

Several transfer errors recur often enough that evaluators watch for them specifically: leaving the wheelchair brakes unlocked; forgetting nonskid footwear so the foot slides; grasping the gait belt overhand (palms down) instead of underhand; standing the resident toward their weaker side so they have nothing strong to push or pivot on; and twisting at the waist instead of pivoting the feet. A gait belt should never be used on a resident with certain conditions such as recent abdominal surgery, advanced pregnancy, or some fractures — in those cases follow the care plan and nurse direction.

When two staff are assigned to a transfer or a mechanical lift, do not attempt it alone to save time; the second person is a safety requirement, not a convenience.