Study guide
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
Washington Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Washington Property & Casualty Insurance Exam Overview
Washington Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
Section II Coverages E (Liability) and F (Medical Payments) Homeowners Conditions and Duties After Loss Common Homeowners Endorsements (Scheduled Property, Water Backup, Ordinance or Law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
Surety and Fidelity Bonds National Flood Insurance Program (NFIP) Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
State Regulation, Licensing, and the McCarran-Ferguson Act Rates, Forms, Solvency, and Guaranty Associations Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Washington P&C Insurance Regulation & Licensing
1.1 Office of Insurance Commissioner (OIC) 1.2 Washington P&C Producer Licensing Requirements 1.3 License Maintenance and Continuing Education
22 Chapter 2: Washington Property Insurance Laws
2.1 Washington Homeowners Insurance Requirements 2.2 Washington Commercial Property Insurance
23 Chapter 3: Washington Casualty Insurance Laws
3.1 Washington Auto Insurance Requirements 3.2 Washington General Liability Insurance 3.3 Washington Workers' Compensation Insurance
24 Chapter 4: Washington P&C Insurance Ethics & Prohibited Practices
4.1 Unfair Trade Practices 4.2 Producer Conduct and Responsibilities 4.3 Washington Property Casualty Insurance Guaranty Association (WPCIAA)
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
Key Takeaways Explain This Topic AI
Part One pays statutory no-fault benefits with no dollar limit; covered states are listed in Item 3.A of the Information Page.
Part Two is liability coverage for injury suits outside the statute: third-party-over actions, dual-capacity, consequential injury, and uncovered workers.
Part Two limits in Item 3.B use a split format: bodily injury by accident / disease policy aggregate / disease each employee, default 100/500/100.
Apply the disease per-employee sublimit to each claim first, then test against the disease aggregate.
Part One tracks statutory benefit changes automatically; Part Two limits are fixed dollar amounts raised only by endorsement.
Last updated: June 2026
Two Different Promises
The NCCI policy answers two distinct exposures with two parts. Part One responds to the obligations the state statute imposes — it is a no-fault, statutory promise. Part Two responds to liability suits arising from workplace injury that fall outside the statute. Confusing the two is the most common exam error on this line.
Quick Answer: Part One pays what the workers comp law requires (unlimited, no-fault). Part Two pays damages a court awards for injury claims the statute does not cover (limited dollar amounts).
Part One — Workers Compensation
Under Part One, the insurer promises to pay promptly when due all benefits required of the insured by the workers compensation law . Key features:
No dollar limit. The insurer pays whatever the statute demands.
The covered states are listed in Item 3.A of the Information Page (the declarations).
The insurer's duty runs to the employee, but the insured (employer) is the policyholder.
If the insurer pays benefits the insured was not liable to pay, it can recover that amount from the insured.
Part One is keyed to the statute, so it automatically tracks benefit-level changes the legislature enacts during the policy term.
Part Two — Employers Liability
Part Two is liability coverage for bodily injury by accident or disease arising out of and in the course of employment that is not compensable under the workers comp statute. It fills gaps where an injured party can still sue the employer at law. Five classic Part Two exposures:
- Gap Example
- Third-party-over actions A machine maker sued by the worker sues back the employer for contribution
- Dual-capacity suits Employer sued in a second role, such as product manufacturer
- Consequential bodily injury Spouse's claim for loss of consortium or care of injured worker
- Care and loss of services Family member's derivative claim
- Workers not covered by the statute An injured worker outside statutory coverage who sues
Part Two Limits and Split Format
Part Two limits appear in Item 3.B of the Information Page and are written in a three-part split form:
- Limit Trigger
- Bodily Injury by Accident Per-accident limit, all employees in one accident
- Bodily Injury by Disease — Policy Limit Aggregate cap for all disease claims
- Bodily Injury by Disease — Each Employee Per-employee disease sublimit
The standard default is $100,000 / $500,000 / $100,000 , read as $100,000 by accident, $500,000 disease aggregate, and $100,000 disease per employee. Higher limits are available by endorsement, and many umbrella carriers require the insured to carry minimum Part Two limits (often 500/500/500 or 1,000,000/1,000,000/1,000,000) before the umbrella will sit above employers liability.
Reading the Disease Limits
The two disease limits trip up candidates. The disease policy limit ($500,000) is an aggregate that caps the insurer's total disease payout for the entire policy period across all employees. The disease each employee limit ($100,000) is the most payable for any one worker's disease claim. The bodily-injury-by-accident limit ($100,000) is a per-accident cap covering all workers hurt in a single event.
So two triggers exist: a sudden traumatic event reaches the accident limit, while a gradual condition (asbestosis, hearing loss, repetitive stress) reaches the disease limits. The same exposure can never tap both — the adjuster classifies the claim as accident or disease, then applies the matching limit.
Worked Split-Limit Example
Three employees are exposed to a toxic chemical over time and each later sues the employer in tort (a Part Two situation, not statutory). Limits are 100/500/100 . Damages awarded: Employee A $90,000, Employee B $130,000, Employee C $400,000.
Apply the Each Employee disease sublimit ($100,000) first:
Employee A: $90,000 (under $100k) -> insurer pays $90,000.
Employee B: $130,000, capped at $100,000 -> insurer pays $100,000.
Employee C: $400,000, capped at $100,000 -> insurer pays $100,000.
Per-employee subtotal = $90,000 + $100,000 + $100,000 = $290,000 .
Now test the $500,000 disease policy aggregate : $290,000 is below $500,000, so no further reduction. The insurer pays $290,000 ; the employer retains the uninsured $40,000 ($30k for B and $300k for C minus paid).
Note how the per-employee sublimit, not the aggregate, did the real limiting here. The aggregate only binds when total per-employee payments would exceed $500,000 — for example, six employees each at $100,000 would total $600,000, which the $500,000 aggregate would cut back to $500,000. Always test the per-employee limit first, then the aggregate.
The Two Parts of the WC Policy
The standard NCCI Workers Compensation and Employers Liability Policy contains two distinct insuring agreements the exam separates carefully:
Part One - Workers Compensation Part Two - Employers Liability
Pays Statutory benefits required by the WC law Damages for bodily injury by accident/disease not covered by the WC statute
- Limit No dollar limit - whatever the statute requires Stated limits (e.g., $100,000/$500,000/$100,000)
- Fault No-fault Tort-based
- Triggers Covered occupational injury Third-party-over, consequential, dual-capacity, loss-of-consortium suits
- Why Part Two Exists
Part One pays statutory benefits with no limit. Part Two (Employers Liability) fills gaps where an employee or related party sues the employer outside the WC statute. Classic Part Two situations:
Third-party-over actions - an injured worker sues a product manufacturer, which then sues the employer for contribution.
Consequential bodily injury - a family member's injury flowing from the worker's injury.
Loss of consortium - a spouse's claim.
Dual-capacity - the employer is sued in a second role (e.g., as product maker).
Part Two carries three limits : bodily injury by accident (each accident) , bodily injury by disease (policy limit) , and bodily injury by disease (each employee) .
Worked Example
A factory worker is hurt by a defective machine. Part One pays the worker's unlimited medical and wage benefits. The worker then sues the machine manufacturer , which turns around and sues the employer for contributing to the injury (a third-party-over action) seeking $400,000 . Because this suit is outside the WC statute, Part Two Employers Liability responds up to its bodily-injury-by-accident limit. Understanding that Part One = statutory/no-limit and Part Two = tort/stated-limit gap-filler is the core distinction.