Study guide

13.3 Premium Basis, Experience Modification, and Classification

Washington Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Washington Property & Casualty Insurance Exam Overview

Washington Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

Section II Coverages E (Liability) and F (Medical Payments) Homeowners Conditions and Duties After Loss Common Homeowners Endorsements (Scheduled Property, Water Backup, Ordinance or Law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

Surety and Fidelity Bonds National Flood Insurance Program (NFIP) Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

State Regulation, Licensing, and the McCarran-Ferguson Act Rates, Forms, Solvency, and Guaranty Associations Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Washington P&C Insurance Regulation & Licensing

1.1 Office of Insurance Commissioner (OIC) 1.2 Washington P&C Producer Licensing Requirements 1.3 License Maintenance and Continuing Education

22 Chapter 2: Washington Property Insurance Laws

2.1 Washington Homeowners Insurance Requirements 2.2 Washington Commercial Property Insurance

23 Chapter 3: Washington Casualty Insurance Laws

3.1 Washington Auto Insurance Requirements 3.2 Washington General Liability Insurance 3.3 Washington Workers' Compensation Insurance

24 Chapter 4: Washington P&C Insurance Ethics & Prohibited Practices

4.1 Unfair Trade Practices 4.2 Producer Conduct and Responsibilities 4.3 Washington Property Casualty Insurance Guaranty Association (WPCIAA)

13.3 Premium Basis, Experience Modification, and Classification

Key Takeaways Explain This Topic AI

Premium basis is payroll per $100; manual premium = (payroll / 100) x classification rate, summed across all class codes.

Each job is assigned an NCCI class code; standard exceptions (clerical 8810, outside sales 8742, drivers 7380) are separately rated from the governing class.

The experience mod multiplies manual premium: below 1.00 is a credit, above 1.00 a debit, 1.00 is average.

Split rating weights primary losses over excess, so frequent small claims hurt the mod more than one large loss.

Premium is estimated at inception on projected payroll and trued up by a year-end audit, producing an additional or return premium.

Last updated: June 2026

Premium Is Payroll-Based

Workers compensation is one of the few lines where premium is a moving target settled by audit. The premium basis is remuneration (payroll) , expressed per $100 of payroll . Each job is assigned a classification code with its own rate reflecting that work's hazard.

Quick Answer: Manual premium = (Payroll / 100) x rate, summed across classifications. The estimated premium is charged at inception; a payroll audit at policy end trues it up to actual payroll.

Classification System

NCCI maintains roughly 600 class codes. A clerical worker carries a far lower rate than a roofer because the loss exposure differs. Rules to remember:

Most employers have one governing classification (the main business) plus standard exceptions that are always separately rated, chiefly clerical (8810) , outside sales (8742) , and drivers (7380) .

Payroll for overtime is counted at the straight-time portion only; the premium portion of overtime pay is excluded.

Executive officers and partners may be included or excluded subject to state min/max payroll caps.

When an employee splits time between two jobs, the payroll is divided only if proper records are kept; otherwise NCCI assigns the entire payroll to the highest-rated classification. This is a frequent audit dispute and a tested point: poor recordkeeping defaults to the most expensive class.

Premium Discounts and Constants

Beyond the mod, two more adjustments commonly appear on the policy and the exam:

An expense constant (a flat charge, often around $160) is added to every policy to cover fixed issuance costs.

A premium discount reduces the rate per dollar of premium as size increases, because expenses are proportionally lower on large accounts. The order of operations is fixed: manual premium, then experience mod, then schedule/expense modifications, then premium discount, then expense constant.

Knowing the sequence matters because applying the mod after a discount would produce the wrong number — the mod always applies to manual premium first.

Worked Manual Premium

A contractor has two classifications:

  • Class Code Payroll Rate per $100
  • Carpentry 5403 $400,000 $9.50
  • Clerical 8810 $100,000 $0.30

Compute each line, then sum:

Carpentry: ($400,000 / 100) x $9.50 = 4,000 x $9.50 = $38,000 .

Clerical: ($100,000 / 100) x $0.30 = 1,000 x $0.30 = $300 .

Manual premium = $38,000 + $300 = $38,300.

The lesson: misclassifying carpentry payroll as clerical would understate premium massively, which is why auditors scrutinize class assignments.

Experience Modification (Mod)

Larger employers receive an experience modification factor (the mod) that compares their actual losses to the losses expected for their class and size. The mod multiplies manual premium:

Modified premium = Manual premium x Experience Mod

  • Mod Value Meaning Effect
  • Mod = 1.00 Average losses for the class Neutral
  • Mod < 1.00 (e.g., 0.85) Better than average Credit — lowers premium
  • Mod > 1.00 (e.g., 1.25) Worse than average Debit — raises premium

The mod rewards safety. NCCI's split-rating gives primary losses (the first portion of each claim) more weight than excess losses , so many small claims hurt the mod more than one large claim — a frequently tested nuance.

Worked Modified Premium and Audit

Using the contractor's $38,300 manual premium and an experience mod of 0.85 :

Modified premium = $38,300 x 0.85 = $32,555 (an $5,745 credit for good loss history).

Now apply a premium discount and audit. Suppose a scheduled credit/expense constant nets out, and the policy was bound on estimated carpentry payroll of $400,000. The year-end audit shows actual carpentry payroll of $460,000 :

Additional carpentry premium = ($60,000 / 100) x $9.50 = 600 x $9.50 = $5,700 manual.

Apply the 0.85 mod: $5,700 x 0.85 = $4,845 additional modified premium billed at audit.

The audit can produce either an additional bill or a return premium depending on whether actual payroll exceeded or fell short of the estimate. If the insured refuses the audit, the insurer may estimate payroll and bill a penalty, or cancel for nonreporting. Most states also set a minimum premium below which the policy cannot be priced regardless of small payroll, protecting the carrier's fixed issuance cost.

Finally, note the audit type: a physical audit sends an auditor to inspect records, while a voluntary (mail/phone) audit lets the insured self-report. Large or high-hazard accounts get physical audits; small clerical accounts often self-report.

How WC Premium Is Built

WC premium is payroll-based : each job is assigned a classification code with a rate per $100 of payroll . The basic formula is:

Premium = (Payroll / 100) x Rate x Experience Modification x other factors

  • Element Role
  • Classification code Groups similar job hazards (clerical vs. roofing)
  • Manual rate Cost per $100 payroll for that class
  • Payroll Audited exposure base
  • Experience modification (mod) Adjusts for the employer's own loss history
  • Schedule/premium discount Credits for size and safety
  • Experience Modification (Mod)

The experience modification factor compares an employer's actual losses to expected losses for its class:

  • Mod = 1.00 -> average for the class
  • Mod > 1.00 (e.g., 1.25) -> worse-than-average losses, premium increases 25%
  • Mod < 1.00 (e.g., 0.80) -> better-than-average losses, premium decreases 20%

The mod rewards safety and penalizes frequent claims, giving employers a financial incentive to control losses.

Classification and Audit

Each business has a governing classification plus standard exceptions (clerical, outside sales, drivers) rated separately. Because premium is estimated on projected payroll, the insurer performs a final audit after the term to true up premium against actual payroll - the insured may owe additional premium or get a refund.

Worked Example

A roofing contractor has $500,000 of roofing payroll at a manual rate of $12 per $100 and an experience mod of 1.20 (worse-than-average losses). Premium = ($500,000 / 100) x $12 x 1.20 = 5,000 x $12 x 1.20 = $72,000 before discounts. If the contractor improved safety and earned a 0.85 mod, the premium would fall to 5,000 x $12 x 0.85 = $51,000 - a $21,000 savings illustrating why loss control directly lowers WC cost. The payroll-times-rate-times-mod computation is a frequently tested WC math problem.