Study guide
9.5 Relaxer Application, Scalp Protection & Diagnostic Safety Testing
Wisconsin State Cosmetology Licensing Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Wisconsin Cosmetology Law, Board Authority & Scope of Practice
1.1 Wisconsin Regulatory Framework: DSPS, the Cosmetology Examining Board & the Cos Rules 1.2 Scope of Practice, Credential Types & Professional Conduct Standards 1.3 Delegated Medical Procedures, Chemical Exfoliation & Advanced Esthetic Limits
2 Chapter 2: Wisconsin Licensure, the State Examination & Establishment Regulation
2.1 Training Pathways, Eligibility & Initial Licensure 2.2 The Wisconsin Licensing Examination: NIC Written & Practical Structure 2.3 Renewal, Endorsement, Inactive Status, Reinstatement & Military Provisions 2.4 Establishments, Managers, Inspections, Citations & Forfeitures
3 Chapter 3: Infection Control, Safety Protocols & Emergency Response
3.1 Microbiology & Pathogen Transmission in Personal Care 3.2 Decontamination Tiers: Cleaning, Disinfection, Sterilization & Salon Hygiene 3.3 Blood Exposure Protocol, OSHA Standards & Emergency First Aid
4 Chapter 4: Anatomy, Physiology, Chemistry, Electricity & Salon Equipment
4.1 Skeletal, Muscular, Nervous & Circulatory Systems of the Head, Face, Hands & Feet 4.2 General Chemistry, Matter & the pH Scale in Hair and Skin Care 4.3 Salon Electricity, Safety Devices & Electrotherapy Modalities 4.4 Salon Equipment, Implements, Supplies, Electrical Tools & Ergonomics
5 Chapter 5: Hair Structure, Trichology & Growth Cycles
5.1 Hair Anatomy, Follicle Structures & the Three Shaft Layers 5.2 Keratin Chemistry, Peptide Bonds & the Three Chemical Side Bonds 5.3 Hair Growth Cycles, Shedding Dynamics & the Four Hair Analysis Factors
6 Chapter 6: Scalp Disorders, Client Consultation, Draping & Shampooing
6.1 Hair Loss Classifications, Scalp Disorders & Service Contraindications 6.2 Client Consultation, Service Records & Draping Protocols 6.3 Water Chemistry, Shampooing, Conditioning & Scalp Treatments
7 Chapter 7: Haircutting Principles, Tools & Hair Design
7.1 Reference Points, Sections, Elevation Angles & Cutting Lines 7.2 Haircutting Tools, Palming Techniques & Texturizing Methods 7.3 Principles of Hair Design & Facial Shape Analysis
8 Chapter 8: Hairstyling, Thermal Styling, Hair Additions & Textured Hair
8.1 Wet Hairstyling: Finger Waves, Pin Curls & Roller Placement 8.2 Thermal Hairstyling, Safety & Hair Pressing 8.3 Natural Hair Styling, Braiding, Extensions & Wigs 8.4 Curl Pattern Analysis & Texture-Specific Hair Care and Design
9 Chapter 9: Chemical Texture Services: Permanent Waving & Relaxing
9.1 Permanent Waving Chemistry: Alkaline, Acid & Exothermic Formulations 9.2 Perm Rod Selection, End Papers, Base Placement & Wrapping Patterns 9.3 Perm Processing, Test Curls, Rinsing & Neutralization Chemistry 9.4 Relaxer Chemistry: Hydroxide Lanthionization vs. Thio Reduction 9.5 Relaxer Application, Scalp Protection & Diagnostic Safety Testing
10 Chapter 10: Hair Coloring, Lightening & Color Correction
10.1 The Law of Color, Melanin, the Level System & Contributing Pigment 10.2 Hair Color Consultation, Analysis & Gray Hair Formulation 10.3 Categories of Hair Color & Hydrogen Peroxide Developers 10.4 Decolorization, Lightener Formulations & Application Techniques 10.5 Predisposition Patch Testing, Strand Testing & Color Correction
11 Chapter 11: Skin Sciences: Anatomy, Physiology, Lesions & Disorders
11.1 Skin Anatomy: The Integumentary System, Epidermis & Dermis 11.2 Cutaneous Glands, the Acid Mantle & the Six Functions of Skin 11.3 Primary and Secondary Skin Lesions & Acne Vulgaris 11.4 Vascular Disorders, Melanoma Screening & Service Contraindications
12 Chapter 12: Esthetic Services: Analysis, Facials, Hair Removal & Makeup
12.1 Skin Analysis, Fitzpatrick Typing, Esthetic Equipment & Client Records 12.2 Facial Treatment Workflow, Exfoliation Limits & Massage Manipulations 12.3 Temporary Hair Removal & Professional Makeup Application
13 Chapter 13: Nail Sciences: Anatomy, Growth, Disorders & Diseases
13.1 The Natural Nail Unit: Anatomy, Histology & Growth Physiology 13.2 Nail Disorders, Diseases & Wisconsin Service Contraindications
14 Chapter 14: Nail Care Services: Consultation, Manicuring & Pedicuring
14.1 Nail Consultation, Analysis, Contraindications & Client Records 14.2 Nail Implements, Equipment, Nail Shapes & the Manicure Procedure 14.3 Pedicure Protocols, Prohibited Implements & Foot Spa Decontamination
15 Chapter 15: Artificial Nail Enhancements
15.1 Nail Tips, Overlays & Fabric Wrap Systems 15.2 Monomer/Polymer Acrylics & Light-Cured Gel Systems
9.5 Relaxer Application, Scalp Protection & Diagnostic Safety Testing
Key Takeaways Explain This Topic AI
Base relaxers require applying a protective petroleum base cream across the entire scalp, whereas no-base relaxers incorporate melting protective oils into the formula but still mandate base cream along the hairline and ears.
The metallic salt test (1:20 test: 1 oz 20-volume peroxide + 20 drops 28% ammonia for 30 minutes) detects metallic dye residues; boiling, bubbling, or hair disintegration strictly contraindicates any chemical perm or relaxer service.
A virgin relaxer is applied to the mid-shaft first, beginning one quarter to one half inch from the scalp and stopping about one inch before the porous ends, because scalp heat and end porosity both accelerate processing.
Last updated: September 2026
- 9.5 Relaxer Application, Scalp Protection & Diagnostic Safety Testing
- 5. Base vs. No-Base Relaxers & Scalp Protection Standards
All hydroxide relaxers can cause severe chemical burns to human skin within minutes. Manufacturers provide protective barrier protocols:
Base Relaxers: Contain no protective oils or petroleum blended into the relaxer cream. Mandatory Safety Rule: The stylist must apply a thick layer of protective base cream (petroleum jelly base) over the entire scalp, hairline, and ears before applying any relaxer.
No-Base Relaxers: Formulated with protective oils, waxes, and silicones that melt at body temperature (98.6°F / 37°C) to coat the scalp during application.
State Board Universal Protection Rule: Even when using a no-base relaxer, the cosmetologist must always apply protective base cream around the entire client hairline and over the tops and backs of the ears to prevent caustic chemical contact with delicate facial and neck skin.
6. Application Methodologies: Virgin Relaxer vs. Retouch Relaxer
Pre-service client preparation requires strict precautions: never shampoo, brush, scratch, or vigorously comb the client's hair before a chemical relaxer . Any scalp irritation or microscopic abrasion will cause excruciating burning and deep chemical ulcers.
Virgin Relaxer Application Protocol
A virgin relaxer is performed on hair that has never received any chemical relaxing service:
Section dry hair into four clean quadrants.
Apply protective base cream to hairline, ears, and scalp as indicated.
Application Sequence: Apply the relaxer 1/4 inch to 1/2 inch away from the scalp , extending down the hair shaft to 1 inch before the ends .
Why Roots and Ends are Avoided Initially: Body heat from the scalp accelerates chemical processing at the roots, which can cause intense overprocessing and scalp burns. The hair ends are older, more porous, and absorb relaxer rapidly.
Process the mid-shaft until approximately 60% to 75% of the curl is relaxed.
During the last few minutes of processing, apply relaxer to the scalp area and porous ends .
Smooth the hair with the back of the comb or gloved fingers, rinse thoroughly with warm water, and apply neutralizing shampoo.
Retouch Relaxer Application Protocol
A retouch relaxer is performed on client regrowth (new growth):
Apply protective base cream to the entire scalp, hairline, ears, and previously relaxed hair (to act as a protective barrier).
Apply relaxer strictly to new growth only , beginning 1/4 inch away from the scalp and stopping right before the line of demarcation.
The Overlap Danger: The stylist must never overlap relaxer onto previously relaxed hair . Overlapping reapplies caustic chemicals to fragile, straightened hair, causing severe line-of-demarcation breakage and permanent thinning.
- 7. Mandatory Diagnostic Safety Testing: The 1:20 Metallic Salt Test & Strand Testing
- The 1:20 Metallic Salt Test
Progressive hair dyes, color restorers, and some henna formulations contain metallic salts (compounds of lead, silver, copper, or bismuth). These metallic residues react violently with the hydrogen peroxide in neutralizers or the alkalis in relaxers:
Testing Protocol:
Combine 1 ounce of 20-volume hydrogen peroxide with 20 drops of 28% ammonia water in a clean glass or plastic dish.
Immerse a 20-strand hair clipping from the client into the mixture and let it sit for 30 full minutes .
Result Interpretation:
Lead Salts: Hair changes color immediately.
Silver Salts: Hair shows no change or turns greenish-gray.
Copper Salts: The solution begins to boil rapidly, bubbles violently, heats up dramatically, emits a foul chemical odor, and completely dissolves or disintegrates the hair strands .
State Board Contraindication: If metallic salts are detected, DO NOT APPLY ANY CHEMICAL PERM OR RELAXER . The hair will smoke, heat to scalding temperatures, melt, and dissolve off the scalp. The metallic coating must be allowed to grow out or be cut off.
Preliminary Strand Testing
A small strand test in the lower crown or nape verifies processing speed, curl reduction percentage, and structural elasticity before proceeding with a full-head application.
8. Comprehensive Chemical Relaxer Formulations Comparison Table
Relaxer Type Active Chemical Agent pH Range Base Requirement Processing Speed Scalp Comfort vs. Hair Impact
Sodium Hydroxide (Lye) Sodium Hydroxide (NaOH) 12.5–13.5 Base or No-Base Rapid (Fastest) High scalp burn risk; excellent straightening; soft feel
Guanidine Hydroxide (No-Lye) Calcium Hydroxide + Guanidine Carbonate 13.0–13.5 Requires mixing Moderate to rapid Reduced scalp irritation; causes dry hair from calcium buildup
Potassium / Lithium Hydroxide Potassium Hydroxide / Lithium Hydroxide 12.5–13.5 No-Base Rapid Similar to sodium hydroxide; fast processing and high pH
Ammonium Thioglycolate (Thio) Ammonium Thioglycolate (ATG) 9.0–11.5 Requires base on hairline Slower (Moderate) Lower pH; reversible reduction; strictly incompatible with hydroxide
Ammonium Bisulfite / Sulfite Ammonium Bisulfite / Sulfite 6.5–8.5 No-Base Slow Very mild; low straightening power; suited for fine/damaged hair
- 9. Scenario Breakdown: Guanidine Hydroxide Application vs. Chemical Overlap Crisis
- Clinical Case Analysis
Case 1: Sensitive Scalp Management: A client with coarse, tightly coiled hair reports a history of severe scalp stinging and chemical burns during previous sodium hydroxide relaxer services. The cosmetologist selects a guanidine hydroxide no-lye relaxer , freshly mixes the calcium hydroxide base and guanidine carbonate activator, applies base cream to the hairline and ears, and performs the service comfortably without scalp irritation. To counteract the drying calcium deposits, the stylist follows with a chelating shampoo and an intensive moisture mask.
Case 2: Overlapping Disaster: A client requests a relaxer retouch for 1 inch of new growth. The inexperienced operator brushes relaxer across the first 3 inches of hair, overlapping onto 2 inches of previously relaxed hair. Two weeks later, the client experiences massive hair shedding along the crown. Microscopic inspection reveals clean transverse fractures at the line of demarcation. The practitioner failed to respect application boundaries, causing irreversible cortex destruction through overlapping.