Study guide

11.1 Exam Logistics, Authorized References & 2026 Code Transition

Wisconsin Journeyman Electrician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Wisconsin Administrative Rules, Licensing & Electrical Safety

1.1 Wisconsin Journeyman Licensing, Eligibility & Scope 1.2 Current SPS 316 Adoption, Enforcement & Wisconsin Amendments 1.3 Supplemental Job Safety: Shock, Arc-Flash & Work Practices 1.4 Electrical Theory & Mathematical Fundamentals

2 Chapter 2: General Code Rules, Definitions & Enclosure Sizing

2.1 NEC Article 100 Definitions & Article 110 General Installation Requirements 2.2 Conductor Sizing, Ampacity Ratings & Temperature Limitations 2.3 Conductor Ampacity Correction & Adjustment Calculations 2.4 Outlet Box, Device Box & Conduit Body Sizing

3 Chapter 3: Branch Circuits, Feeders & Calculations

3.1 Branch Circuit Ratings, Multiwire Circuits & General Receptacle Outlets 3.2 Wisconsin GFCI & AFCI Protection: NEC 2017-to-2023 Transition 3.3 Dwelling Branch Circuits, Receptacle Spacing & Wisconsin Countertop Rules 3.4 Feeder Sizing, Overcurrent Protection & Voltage Drop

4 Chapter 4: Services & Dwelling Load Calculations

4.1 Dwelling Unit Load Calculations: Standard Method 4.2 Dwelling Unit Load Calculations: Optional Method 4.3 Service Conductors, Disconnects & Current SPS 316.230 Amendments

5 Chapter 5: Grounding and Bonding

5.1 Grounding & Bonding Principles, Systems & Definitions 5.2 Grounding Electrode Systems & GEC Sizing 5.3 Main Bonding Jumpers & Supply-Side Bonding 5.4 Equipment Grounding Conductors & Enclosure Bonding

6 Chapter 6: Wiring Methods, Raceways & Cable Assemblies

6.1 General Wiring Rules & Underground Installations 6.2 Cable Assemblies: NM, NMC, MC, and AC 6.3 Raceways, Conduit Bending & Support Requirements 6.4 Conduit Fill Calculations & Pull Box Sizing

7 Chapter 7: Equipment for General Use: Motors, Generators & Transformers

7.1 Motor Branch Circuit Sizing & Full-Load Currents 7.2 Motor Branch-Circuit Short-Circuit & Overload Protection 7.3 Transformers & Overcurrent Protection

8 Chapter 8: General Loads & Utilization Equipment

8.1 General & Non-Dwelling Load Calculations 8.2 Luminaires, Lighting Systems & Electric Signs 8.3 Appliances, Fixed Electric Space Heating & Water Heating 8.4 Air-Conditioning & Refrigeration Equipment

9 Chapter 9: Special Occupancies & Emergency Systems

9.1 Hazardous (Classified) Locations & Commercial Applications 9.2 Health Care Facilities & Essential Electrical Systems 9.3 Pools, Spas, Hot Tubs & Fountains 9.4 Emergency Systems, Standby Power & Generators

10 Chapter 10: Modern Energy & Low-Voltage Systems

10.1 EV Charging, Photovoltaics, Energy Storage & Interconnections 10.2 Fire Alarm, Signaling & Communications Systems

11 Chapter 11: Exam Logistics & Success

11.1 Exam Logistics, Authorized References & 2026 Code Transition 11.2 Code Navigation, Time Management & Formula Review

11.1 Exam Logistics, Authorized References & 2026 Code Transition

Key Takeaways Explain This Topic AI

The DSPS credential checklist lists 100 questions, 4 hours, and 24 continuing-education hours for the 4-year Journeyman Electrician credential term; the exam page sets a 70% passing score.

The exam is open book: use the assigned NEC/handbook, SPS 305 and SPS 316 with printed notes in one three-ring binder, and no more than two additional printed bound references.

Loose paper, removable tabs, sticky notes, paper clips, practice exams, and previous exam questions are prohibited; tabs supplied with a bound book and three-ring binder dividers are allowed.

Use NEC 2017 through September 30, 2026 and NEC 2023 beginning October 1, 2026; always recheck the official exam page before the appointment.

Candidates schedule through LicensE after authorization and choose a DSPS or Pearson VUE location; Pearson currently lists a $95 candidate fee and a selected Pearson session cannot be switched back to DSPS.

Last updated: September 2026

11.1 Exam Logistics, Authorized References & 2026 Code Transition

Use official DSPS instructions for test-day preparation. Third-party summaries frequently preserve an old code edition, wrong fee, or an invented calculator rule.

Format and passing standard

The DSPS credential checklist lists the Journeyman Electrician exam as 100 questions in 4 hours . The DSPS exam page states that a score of 70% or higher is required to pass. DSPS does not publish a percentage-weighted domain blueprint, so do not plan around an unofficial claim that five subjects are exactly 20% each.

At 100 questions in 240 minutes, the average is 2.4 minutes per question. That is a pacing average, not a requirement to spend the same time on every item.

Authorized reference transition

DSPS currently assigns:

Through September 30, 2026: 2017 NEC or 2017 NEC Handbook.

Beginning October 1, 2026: 2023 NEC or 2023 NEC Handbook.

The state materials are SPS 305 and SPS 316. Because exam instructions can change, open the official Journeyman Electrician exam page again shortly before the appointment and match the books to the scheduled date.

Binding and note rules

The exam is open book, but the materials must meet the published restrictions:

SPS 305, SPS 316, and printed notes may be placed in one three-ring binder .

Candidates may bring no more than two additional printed bound reference books .

Loose paper is prohibited.

Removable tabs, sticky notes, and paper clips are prohibited.

Tabs that came with a bound book and three-ring binder dividers are allowed.

Practice examinations and previous examination questions are prohibited.

The rule permits printed notes in the binder; it is inaccurate to say that all notes are forbidden. Prepare the binder before test day, use a durable index, and avoid inserting prohibited question banks.

DSPS publishes the reference rule, not a blanket guarantee for every calculator model or personal item. Follow the appointment confirmation and testing-site security instructions for calculators, identification, lockers, arrival time, and prohibited electronics.

Application and scheduling

Apply through LicensE and wait for authorization. Then schedule an available session at a DSPS or Pearson VUE location. DSPS warns that after choosing Pearson VUE for that examination, the candidate cannot switch the session back to a DSPS site.

The current Pearson trade-exam fee schedule lists $95 for the Journeyman Electrician exam. DSPS-site fees are shown during LicensE scheduling. Do not rely on an old $50–$75 range.

The exam is in person; DSPS does not list a remote-testing option for this trade exam.

Accommodations

Request disability accommodations through the process and forms identified by DSPS, with enough time for review before scheduling. Do not wait until arrival at the test center. An approved accommodation changes the authorized testing arrangement; an informal request to a proctor does not.

Results and retakes

DSPS states that results are provided within 21 days . Follow the result notice and LicensE instructions for the next step. If unsuccessful, pay the required new examination fee and schedule another session; only one session may be scheduled at a time. DSPS does not publish a universal fixed waiting period on the current trades-exam page.

A candidate may request review of a failed examination within 3 months . The current trades-exam instructions list a $15 review fee and a one-hour review. A review cannot be scheduled within 7 days before a retake . Review rules protect exam security, so expect limitations on copying or recording questions.

Final pre-exam checklist

Confirm appointment date, location, and NEC edition.

Print current SPS 305 and SPS 316 and organize them in the allowed binder.

Remove loose sheets, sticky notes, removable tabs, clips, practice tests, and prior exam questions.

Verify accepted identification and testing-site arrival instructions.

Confirm the calculator and personal-item policy in the appointment notice.

Know how to reach both the DSPS application record and the testing vendor if a scheduling problem occurs.

Accurate logistics protect the study investment. Bringing the wrong NEC edition or prohibited loose notes can undermine otherwise strong technical preparation.

Appointment-day control

If the appointment confirmation conflicts with a generic study summary, resolve the conflict with DSPS or the selected testing provider before arrival. Keep the authorization, fee receipt, accommodation approval, and identity documents together. Allow time for check-in and book inspection; the four-hour testing clock and site security procedures are governed by the official appointment instructions, not by a prep course.