Study guide

1.1 Wisconsin Journeyman Licensing, Eligibility & Scope

Wisconsin Journeyman Electrician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Wisconsin Administrative Rules, Licensing & Electrical Safety

1.1 Wisconsin Journeyman Licensing, Eligibility & Scope 1.2 Current SPS 316 Adoption, Enforcement & Wisconsin Amendments 1.3 Supplemental Job Safety: Shock, Arc-Flash & Work Practices 1.4 Electrical Theory & Mathematical Fundamentals

2 Chapter 2: General Code Rules, Definitions & Enclosure Sizing

2.1 NEC Article 100 Definitions & Article 110 General Installation Requirements 2.2 Conductor Sizing, Ampacity Ratings & Temperature Limitations 2.3 Conductor Ampacity Correction & Adjustment Calculations 2.4 Outlet Box, Device Box & Conduit Body Sizing

3 Chapter 3: Branch Circuits, Feeders & Calculations

3.1 Branch Circuit Ratings, Multiwire Circuits & General Receptacle Outlets 3.2 Wisconsin GFCI & AFCI Protection: NEC 2017-to-2023 Transition 3.3 Dwelling Branch Circuits, Receptacle Spacing & Wisconsin Countertop Rules 3.4 Feeder Sizing, Overcurrent Protection & Voltage Drop

4 Chapter 4: Services & Dwelling Load Calculations

4.1 Dwelling Unit Load Calculations: Standard Method 4.2 Dwelling Unit Load Calculations: Optional Method 4.3 Service Conductors, Disconnects & Current SPS 316.230 Amendments

5 Chapter 5: Grounding and Bonding

5.1 Grounding & Bonding Principles, Systems & Definitions 5.2 Grounding Electrode Systems & GEC Sizing 5.3 Main Bonding Jumpers & Supply-Side Bonding 5.4 Equipment Grounding Conductors & Enclosure Bonding

6 Chapter 6: Wiring Methods, Raceways & Cable Assemblies

6.1 General Wiring Rules & Underground Installations 6.2 Cable Assemblies: NM, NMC, MC, and AC 6.3 Raceways, Conduit Bending & Support Requirements 6.4 Conduit Fill Calculations & Pull Box Sizing

7 Chapter 7: Equipment for General Use: Motors, Generators & Transformers

7.1 Motor Branch Circuit Sizing & Full-Load Currents 7.2 Motor Branch-Circuit Short-Circuit & Overload Protection 7.3 Transformers & Overcurrent Protection

8 Chapter 8: General Loads & Utilization Equipment

8.1 General & Non-Dwelling Load Calculations 8.2 Luminaires, Lighting Systems & Electric Signs 8.3 Appliances, Fixed Electric Space Heating & Water Heating 8.4 Air-Conditioning & Refrigeration Equipment

9 Chapter 9: Special Occupancies & Emergency Systems

9.1 Hazardous (Classified) Locations & Commercial Applications 9.2 Health Care Facilities & Essential Electrical Systems 9.3 Pools, Spas, Hot Tubs & Fountains 9.4 Emergency Systems, Standby Power & Generators

10 Chapter 10: Modern Energy & Low-Voltage Systems

10.1 EV Charging, Photovoltaics, Energy Storage & Interconnections 10.2 Fire Alarm, Signaling & Communications Systems

11 Chapter 11: Exam Logistics & Success

11.1 Exam Logistics, Authorized References & 2026 Code Transition 11.2 Code Navigation, Time Management & Formula Review

1.1 Wisconsin Journeyman Licensing, Eligibility & Scope

Key Takeaways Explain This Topic AI

Wisconsin DSPS recognizes three general Journeyman Electrician eligibility routes: a recognized construction electrical apprenticeship; 48 months and 8,000 hours of qualifying electrical experience; or at least 1,000 hours per year for 5 years.

Full-time postsecondary electrical study may receive 500 hours of experience credit per semester, up to 2,000 hours and 2 years; the applicant must document the remaining qualifying experience.

A Journeyman Electrician works under the general supervision of a Master Electrician or Registered Master Electrician; dwelling-related work may also be supervised by a Residential Master Electrician.

The Journeyman Electrician credential has a 4-year term ending June 30 and the DSPS credential checklist lists 24 hours of continuing education for renewal.

Wisconsin lists separate reciprocity paths for Iowa and New Hampshire, each with conditions stated on current DSPS Form 3106.

Last updated: September 2026

1.1 Wisconsin Journeyman Licensing, Eligibility & Scope

Wisconsin regulates electrician credentials through the Department of Safety and Professional Services (DSPS), principally under SPS 305. The exam in this guide is for the general Journeyman Electrician credential. It is not the Residential Journeyman Electrician or Industrial Journeyman Electrician examination. That identity matters because the allowed scope, qualifying record, exam, and reciprocal pathway are credential-specific.

The credential hierarchy

The general trade structure separates business authority, technical supervision, and worker credentials:

An Electrical Contractor credential authorizes the credentialed entity to conduct the contracting business, subject to the applicable master-electrician relationship and other state requirements.

A Master Electrician or Registered Master Electrician provides the general supervision required for general electrical work.

A Journeyman Electrician performs electrical work within the credential's scope under that general supervision. A Residential Master Electrician may supervise a journeyman only for work associated with dwellings, dwelling units, and detached accessory structures serving dwellings.

Apprentice, registered-electrician, residential, and industrial credentials are separate categories. Do not transfer a section number or scope statement from one category to another.

The practical exam lesson is simple: read the exact credential name in a question before applying a supervision or scope rule. The DSPS profession page is the controlling identity source.

Three application routes

Current DSPS Form 3106 presents three ways to establish experience for the general journeyman application:

Recognized apprenticeship. Complete a construction electrical apprenticeship program recognized by the Wisconsin Department of Workforce Development or by the U.S. Department of Labor.

Hours plus months. Document at least 48 months and 8,000 hours of experience in installing, repairing, and maintaining electrical wiring.

Five-year alternative. Document at least 1,000 hours of qualifying electrical experience in each year for 5 years .

Do not silently add requirements that are not on the current form. For example, the form does not convert the apprenticeship route into a separate universal requirement that every applicant show a particular OSHA card or a fixed number of classroom hours. An apprenticeship program may impose its own completion requirements, but the licensing application asks whether the recognized program was completed.

Education credit

Postsecondary electrical education can reduce the experience still needed, but it does not automatically replace the field record. For full-time study in an electrical-related program, DSPS allows 500 hours for each completed semester , capped at 2,000 hours and 2 years . Keep both limits in view. Four qualifying semesters could provide 2,000 hours and two years of credit; the applicant must still document the balance required by the selected route.

When solving an eligibility problem, write a two-column ledger: credited months or years on one side and credited hours on the other. A candidate using the 48-month/8,000-hour route must satisfy both measures after allowed education credit.

Application evidence and exam authorization

The applicant submits the journeyman application through DSPS LicensE and completes the experience table or recognized-apprenticeship documentation required by the form. DSPS reviews the application before the candidate schedules an exam. A witness who can attest to the experience may be required on the experience record. Use the current form and LicensE checklist rather than an old affidavit template or a third-party prep site's instructions.

After approval, the candidate follows the DSPS examination process. The exam is offered at DSPS and Pearson VUE locations, but it remains a Wisconsin credential examination authorized by DSPS. Selecting a testing vendor does not change the credential or its legal scope.

Renewal and continuing education

The DSPS credential checklist lists the general Journeyman Electrician credential with a 4-year term , a June 30 expiration , and 24 hours of continuing education . Renewal rules and course approvals can change, so a working electrician should verify the current renewal notice and DSPS continuing-education page instead of relying on an exam-prep summary years later.

Do not infer an automatic retest rule, document-retention period, or disciplinary consequence unless it appears in the current rule or renewal instructions. Exam questions should be answered from the assigned SPS 305 text.

Reciprocity is conditional

Wisconsin Form 3106 identifies reciprocity paths for Iowa and New Hampshire , but the conditions are not identical.

The Iowa route is tied to Iowa licensure and the qualifying apprenticeship or experience record described on the form.

The New Hampshire route includes conditions involving how long the license has been held and the education or safety training identified by DSPS.

Reciprocity is therefore not “automatic because the state is on a list.” Match the applicant's facts to the current Wisconsin form. Applicants from states not listed on the form use a standard Wisconsin eligibility route and, when required, the Wisconsin exam.

Exam method

For administrative questions, use this order: identify the exact credential, locate its SPS 305 provision, check the current DSPS profession page and application form, and distinguish an application requirement from an employer or apprenticeship-program requirement. That sequence prevents the most common errors—mixing the general credential with the residential or industrial credential, counting education twice, or treating conditional reciprocity as automatic.