Study guide

1.1 Wisconsin Plumbing Credentials, Scope & Supervision (Ch. 145, SPS 305)

Wisconsin Journeyman Plumber Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Licensing, Exam Rules & Code Administration

1.1 Wisconsin Plumbing Credentials, Scope & Supervision (Ch. 145, SPS 305) 1.2 The Journeyman Exam: Format, Fees, Retakes & Permitted References 1.3 Plan Review, Plan Approval & Product Approvals (SPS 382.20) 1.4 Testing, Inspection, Maintenance & Repairs (SPS 382.21, 382.22) 1.5 Code Structure, Key Definitions, Basic Principles & Referenced Standards

2 Chapter 2: Sanitary Drainage Systems (SPS 382.30)

2.1 Drainage Fixture Units (DFU) & Load Values 2.2 Horizontal Branch Drains, Pitch & Changes in Direction 2.3 Drain Stacks, Branch Intervals & Stack Offsets 2.4 Building Drains, Building Sewers & Private Interceptor Main Sewers

3 Chapter 3: Venting Systems & Cold-Climate Vent Terminals (SPS 382.31)

3.1 Vent Stacks, Relief Vents & Vent Sizing Tables 3.2 Common Vents, Wet Vents & Circuit Vents 3.3 Return Vents, Combination Drain & Vent Systems & Air Admittance Valves 3.4 Vent Terminals, Frost Closure & Prohibited Vent Uses

4 Chapter 4: Traps, Indirect Waste & Wastewater Treatment Devices

4.1 Fixture Traps, Trap Seals & Direct Fixture Connections 4.2 Trap-to-Vent Distances (Table 382.31-1) 4.3 Indirect & Local Waste Piping, Air Gaps & Receptors 4.4 Interceptors, Catch Basins & Chemical Waste Treatment (SPS 382.34)

5 Chapter 5: Water Supply Systems (SPS 382.40)

5.1 Water Supply Fixture Units (WSFU) & Demand 5.2 Sizing Water Distribution Piping: Pressure, Friction & Velocity 5.3 Control Valves, Thermal Expansion, Water Hammer & Pipe Identification 5.4 Water Heaters, Relief Valves, Hot Water Delivery & Temperature Control 5.5 Water Services, Private Water Mains, Disinfection & Storage Tanks

6 Chapter 6: Cross-Connection Control & Backflow Prevention (SPS 382.41)

6.1 Cross-Connection Fundamentals, Hazard Classes & Pressure Conditions 6.2 Backflow Devices & Assemblies: Table 382.41-1, Limits & Installation 6.3 Assembly Registration, DSPS Tags, Annual Testing & Tester Registration

7 Chapter 7: Plumbing Fixtures, Fittings & Appliances (SPS 384.20)

7.1 Fixture Construction, Clearances, Shower Size & Safing 7.2 Water-Conserving Fixtures, Faucets & Fixture Supply Connectors 7.3 Water Heaters, Water Treatment Devices & Other Plumbing Appliances

8 Chapter 8: Piping Materials, Joints & Supports (SPS 384.30, 384.40, 382.60)

8.1 Approved Piping Materials by Service & Lead-Free Rules 8.2 Joints, Connections & Transitions Between Materials (SPS 384.40) 8.3 Hangers, Supports & Protection of Piping (SPS 382.60)

9 Chapter 9: Private Onsite Wastewater Treatment Systems (SPS 383, 385 & Component Manuals)

9.1 POWTS Regulation, Sanitary Permits, Plan Review & Inspection 9.2 Soil & Site Evaluation and In Situ Soil Parameters (SPS 385, SPS 383.44) 9.3 Design Flow, Septic & Holding Tanks and Tank Construction 9.4 Dispersal Components & the DSPS Component Manuals 9.5 POWTS Setbacks, Management, Maintenance Reporting & Abandonment

10 Chapter 10: Cleanouts, Stormwater, Sumps & Multipurpose Piping

10.1 Cleanouts & Manholes (SPS 382.35) 10.2 Stormwater & Clearwater Systems (SPS 382.36) 10.3 Sanitary Sumps, Ejectors & Discharge Points (SPS 382.30 (10), 382.38) 10.4 Multipurpose Piping Systems & NFPA 13D Residential Sprinklers

11 Chapter 11: Special Plumbing Installations & Water Reuse

11.1 Health Care & Related Facilities (SPS 382.50) 11.2 Manufactured Homes, Campgrounds, RV Parks & Dump Stations 11.3 Water Reuse, Plumbing Treatment Standards & Stormwater Infiltration

1.1 Wisconsin Plumbing Credentials, Scope & Supervision (Ch. 145, SPS 305)

Key Takeaways Explain This Topic AI

A journeyman plumber works under the general supervision of a licensed master plumber, master plumber-restricted or utility contractor (SPS 305.93), and must complete a ch. 106 apprenticeship to sit for the exam.

Plumbing apprentices (SPS 305.95) work under the general supervision of a licensed master plumber and must be in an apprentice contract under ch. 106, Stats.

Restricted service licenses cover POWTS, building sewers, water services and similar exterior systems; restricted appliance licenses cover connections to an existing water distribution system that need no direct drain connection.

Learners need direct supervision, and a business using learners must keep at least one journeyman or journeyman-restricted for each learner (SPS 305.90 (3)).

Journeyman plumber licenses run 4 years, expire March 31, cost $180, and require 24 hours of continuing education to renew.

Last updated: October 2026

The legal framework

Wis. Stat. ch. 145 defines plumbing and requires licenses. It also sets exemptions and penalties and directs DSPS to adopt the state plumbing code , which must "uniformly apply to all types of buildings" (s. 145.02 (2)).

Ch. SPS 305, Subchapter IX (SPS 305.90 to 305.99) sets each plumbing credential's qualifications, scope, supervision and renewal.

Wis. Stat. ch. 106 governs apprenticeship contracts. Section 106.025 requires every plumbing apprentice to enter an apprentice contract under s. 106.01.

Under s. 145.06, no person may engage in or work at plumbing without a DSPS license, and apprentices and pipelayers must be registered . Plumbing must always be installed with a licensed master plumber in charge who is responsible for it. Licenses are issued only to individuals, never to firms, and a master plumber may not let anyone use the license to obtain local permits or do the work.

The credentials (SPS 305.90 to 305.99)

Section Credential Supervision or scope

305.91 Master plumber Full scope; qualifies with 1,000 hrs/yr for 3 years as a licensed journeyman, or an approved engineering degree

305.92 Master plumber-restricted (service or appliance) Restricted scope; qualifies with 1,000 hrs/yr for 2 years as a journeyman or matching journeyman-restricted

305.93 Journeyman plumber General supervision of a master plumber, master plumber-restricted or utility contractor; limited to that supervisor's scope

305.94 Journeyman plumber-restricted service General supervision of a master plumber or master plumber-restricted service

305.945 Journeyman plumber-restricted appliance General supervision of a master plumber or master plumber-restricted appliance

305.95 Plumbing apprentice (registration) General supervision of a licensed master plumber ; must be under a ch. 106 apprentice contract

305.96 Plumbing learner-restricted service or appliance Direct supervision of a master, journeyman or matching restricted licensee

305.97 Utility contractor Water services, private water mains, sanitary and storm building sewers and private interceptor main sewers, from the street main to the immediate inside of the foundation wall

305.98 Pipelayer (registration) Same exterior work as a utility contractor, under general supervision of a utility contractor, master plumber or master plumber-restricted service

  • 305.99 Cross connection control assembly tester Performance-tests backflow assemblies (section 6.3)
  • Restricted scopes (SPS 305.90 (1) (b))

Restricted service (master, journeyman or learner) is limited to:

POWTS and their components

Sanitary and storm building sewers and private interceptor main sewers, to the immediate inside of the foundation wall

  • Water services, private water mains, and manufactured home community, campground and RV park water systems
  • The connection from a sewer or water service to a manufactured home's connection
  • Manufactured home community, campground and RV park drain systems

Wastewater treatment devices, stormwater use systems and reclaimed water systems outside the building perimeter

Service types 2 to 4 (underground drain and vent, modification of existing water distribution, and sewer conversion piping) are no longer issued to new applicants.

Restricted appliance is limited to connections with an existing water distribution system that do not require a direct connection to the drain system : items connecting to the water system, stormwater use or reclaimed water supply systems, and the minimum piping to connect them. A water softener whose regeneration waste discharges through an air gap to an existing standpipe fits this scope. Cutting a new trap into a waste line does not.

Learners, apprentices and ratios

Learners need no exam or training to register, but must be at least 16 and have finished 12th grade or equivalent. Any business using learners must keep at least one journeyman (or journeyman-restricted) for each learner . A master may count as a journeyman for this ratio.

Apprentices are governed by ch. 106 and DWD's Bureau of Apprenticeship Standards, which may set more supervision rules for training. Wis. Stat. s. 106.015 bars DWD from requiring a ratio of more than one journeyworker per apprentice , except under a collective bargaining agreement. SPS 305 sets no fixed "one apprentice plus one per three journeymen" formula.

After an apprenticeship term ends, the apprentice may not work in plumbing as an apprentice or journeyman without a journeyman license. Someone who fails the exam may keep working as an apprentice only until the time for re-examination (s. 106.025 (3)).

A master plumber who bills an apprentice at a journeyman's wage, or represents an apprentice as a journeyman, faces a fine up to $25 or up to 30 days in jail per day of violation (s. 145.12 (3)).

Who must be licensed and who is exempt (s. 145.06 (4))

Ch. 145 doesn't apply to:

A property owner doing plumbing in a one-family building that the owner owns and occupies as a home or farm building, unless a local ordinance requires a license.

Pump installers licensed under ch. 280 working from the well pump to the initial pressure tank and the connection to the distribution system.

Municipal utility employees or their contractors installing sewer and water service piping from the main to the lot line, and sewer and water main installers.

Minor repairs to faucets, valves, pipes or appliances, replacing electrical or gas valves and controls, and clearing stoppages.

Renewal and continuing education

  • Credential Term Expires License fee (Table 305.02) CE per renewal
  • Journeyman plumber 4 years March 31 $180 24 hours
  • Journeyman plumber-restricted service or appliance 4 years March 31 $180 12 hours
  • Master plumber 4 years March 31 $500 24 hours
  • Master plumber-restricted 4 years March 31 $500 12 hours
  • Utility contractor 4 years March 31 $500 6 hours
  • Cross connection control tester per Table 305.06 per Table 305.06 $180 6 hours
  • Plumbing apprentice 1 year Date of issuance $15 Proof of apprentice contract

DSPS mails a renewal notice at least 30 days before expiration, but not receiving it is no excuse. Late renewal within one term needs an application fee, plus a $25 processing fee for late CE. After more than one term, reinstatement costs a $200 administrative fee and may require re-examination. Course providers enter CE in LicensE.

Penalties (s. 145.12)

Acting as a master plumber without a license, or otherwise violating ch. 145: $100 to $500 or 30 days, with each day a separate offense.

Violating plumbing rules or orders: $10 to $1,000 per violation per day.

DSPS may directly assess forfeitures of up to $2,000 per violation of s. 145.06.

Loading diagram... Wisconsin plumbing credential ladder