Study guide

11.1 CGL Limits of Insurance and Aggregates

Wisconsin Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Wisconsin Property & Casualty Insurance Exam Overview

Wisconsin Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D - Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E - Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Wisconsin P&C Insurance Regulation & Licensing

1.1 Wisconsin Office of the Commissioner of Insurance (OCI) 1.2 Wisconsin Producer Licensing 1.3 Producer Duties and Responsibilities 1.4 Wisconsin Insurance Security Fund

22 Chapter 2: Wisconsin Property Insurance

2.1 Wisconsin Homeowners Insurance 2.2 Wisconsin Insurance Plan (FAIR Plan) 2.3 Wisconsin Commercial Property Insurance

23 Chapter 3: Wisconsin Casualty & Auto Insurance

3.1 Wisconsin Auto Insurance Requirements 3.2 Wisconsin Workers' Compensation Insurance 3.3 Wisconsin Liability Insurance

11.1 CGL Limits of Insurance and Aggregates

Key Takeaways Explain This Topic AI

The CGL (CG 00 01) has six distinct limits, including two annual aggregates that do not restore mid-term.

The Each Occurrence limit caps any single event, but the General Aggregate is the hard annual ceiling for all non-products losses.

Products-completed operations losses erode a separate aggregate, preserving capacity for premises/operations claims.

Medical Payments (Coverage C) shares the Each Occurrence limit and erodes the General Aggregate; it has no separate aggregate.

Damage to Premises Rented to You defaults to $300,000 and is a sublimit within the Each Occurrence limit.

Last updated: June 2026

How the CGL Limits Section Works

The Commercial General Liability Coverage Form ( ISO CG 00 01 , current edition CG 00 01 04 13) does not use a single policy limit. Instead, Section III - Limits of Insurance establishes six separate limits that interact in a defined order. Producers must know each limit, which coverage it caps, and how the two aggregates restore (or fail to restore) over the policy period. Exam questions almost always test the interplay between the per-occurrence limit and the aggregates, not a single number in isolation.

The declarations page shows these limits. The standard CGL is written on an occurrence basis unless a claims-made form (CG 00 02) is selected, which changes the trigger but not the limit structure covered here.

The Six CGL Limits

Limit What it caps Resets?

General Aggregate Most the insurer pays for all damages under Coverage A (except products-completed ops), Coverage B, and Coverage C combined Annually

Products-Completed Operations Aggregate All Coverage A bodily injury/property damage arising from the products-completed operations hazard Annually

Personal and Advertising Injury Limit Most paid for Coverage B per person/organization Per person/org; capped by General Aggregate

Each Occurrence Limit Most paid for Coverage A + Coverage C combined for any one occurrence Per occurrence; capped by aggregates

Damage to Premises Rented to You Most paid for property damage to one premises rented to or temporarily occupied by you Per premises

Medical Expense (Coverage C) Most paid for medical expenses for any one person Per person

The Damage to Premises Rented to You limit (formerly "Fire Legal Liability") defaults to $300,000 in the CG 00 01 04 13 edition and applies to fire, plus other perils if rented 7 or fewer consecutive days.

How the Aggregates Cap Everything

The Each Occurrence limit is the gatekeeper for any single loss event, but every payment also erodes one of the two aggregates:

Coverage A (non-products) losses, all Coverage B, and all Coverage C erode the General Aggregate .

Coverage A losses inside the products-completed operations hazard erode the separate Products-Completed Operations Aggregate .

Once an aggregate is exhausted, the insurer pays nothing further in that category for the rest of the policy term, even if individual occurrences still have room under the Each Occurrence limit. The aggregates do not restore mid-term; they reset only when the policy renews.

Worked Numeric: Stacking Limits Against the General Aggregate

A contractor carries: Each Occurrence $1,000,000 / General Aggregate $2,000,000 / Products-Completed Ops Aggregate $2,000,000.

During the year, three premises (non-products) liability occurrences hit the policy:

  • Occurrence 1: $1,000,000 (paid in full - at Each Occurrence limit)
  • Occurrence 2: $1,000,000 (paid in full - General Aggregate now $2,000,000 used)
  • Occurrence 3: $600,000 (the General Aggregate is exhausted - insurer pays $0 )

Total paid: $2,000,000 , not $2,600,000. The Each Occurrence limit had room for occurrence 3, but the General Aggregate is the hard ceiling. A separate products-completed operations claim that same year would still draw on its own untouched $2,000,000 aggregate.