Study guide
2.3 Coinsurance and the Coinsurance Formula
Wisconsin Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Wisconsin Property & Casualty Insurance Exam Overview
Wisconsin Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D - Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E - Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Wisconsin P&C Insurance Regulation & Licensing
1.1 Wisconsin Office of the Commissioner of Insurance (OCI) 1.2 Wisconsin Producer Licensing 1.3 Producer Duties and Responsibilities 1.4 Wisconsin Insurance Security Fund
22 Chapter 2: Wisconsin Property Insurance
2.1 Wisconsin Homeowners Insurance 2.2 Wisconsin Insurance Plan (FAIR Plan) 2.3 Wisconsin Commercial Property Insurance
23 Chapter 3: Wisconsin Casualty & Auto Insurance
3.1 Wisconsin Auto Insurance Requirements 3.2 Wisconsin Workers' Compensation Insurance 3.3 Wisconsin Liability Insurance
2.3 Coinsurance and the Coinsurance Formula
Key Takeaways Explain This Topic AI
Coinsurance penalizes underinsurance on every partial loss to enforce insurance to value; 80% is the most common requirement.
Claim Payment = (Amount Carried / Amount Required) x Loss, where Amount Required = Property Value x Coinsurance %.
Apply the formula, cap at the lesser of the loss or policy limit, then subtract the deductible last.
On a total loss the penalty is irrelevant — the insurer pays the lesser of the policy limit or the loss.
An agreed-value endorsement suspends coinsurance and is the standard fix for the penalty.
Last updated: June 2026
Why Coinsurance Exists
Most property losses are partial , not total. Without a penalty for underinsurance, an owner would insure a $500,000 building for only $100,000, pay a fraction of the premium, and still recover most partial losses — starving the insurer of the premium that matches the real exposure. The coinsurance clause corrects this by penalizing the insured on every loss when the policy limit falls below a required percentage of the property's value. It rewards insurance to value .
Common coinsurance percentages on commercial property: 80% (most common), 90% , and 100% .
The Coinsurance Formula Claim Payment = (Amount Carried / Amount Required) x Loss
- Term Meaning
- Amount Carried The policy limit actually purchased
- Amount Required Property Value x Coinsurance %
- Loss The amount of the actual covered damage
Two hard caps always apply after the formula runs: the payment can never exceed the actual loss or the policy limit , whichever is less. The deductible is subtracted last , after the coinsurance calculation. Memorize the order: compute the penalty ratio, multiply by the loss, then cap, then subtract the deductible.
Example 1 — Requirement Met (No Penalty)
Building value $500,000 ; coinsurance 80% ; policy limit $400,000 ; loss $100,000 .
Amount Required = $500,000 x 80% = $400,000 .
Ratio = $400,000 / $400,000 = 100% .
Claim = 100% x $100,000 = $100,000 — the full loss is paid (less deductible).
Because the insured carried exactly the required amount, there is no penalty. Carrying more than required does not pay extra — the policy limit still caps recovery.
Example 2 — Underinsured (Penalty Applies)
Building value $800,000 ; coinsurance 80% ; policy limit carried $500,000 ; fire loss $200,000 .
Amount Required = $800,000 x 80% = $640,000 .
Ratio = $500,000 / $640,000 = 0.78125 (about 78%).
Claim = 0.78125 x $200,000 = $156,250 .
The insured eats roughly $43,750 of the partial loss as a coinsurance penalty for underinsuring. The penalty applies to partial losses; a total loss simply pays the policy limit (here $500,000), never more.
Total-Loss Behavior and How to Avoid the Penalty
On a total loss , coinsurance does not increase recovery — the insurer pays the lesser of the policy limit or the loss . If an $800,000 building insured for $200,000 burns to the ground, the insurer pays $200,000 , not $320,000; the limit caps it.
Three ways to neutralize coinsurance:
Insure to value — carry at least the required percentage of value.
Agreed value endorsement — the parties agree on a value and coinsurance is suspended for the term.
No-coinsurance / blanket forms — some commercial programs waive coinsurance for a higher rate.
The single best exam answer to "how do I eliminate the coinsurance penalty?" is agreed value .
Example 3 — With a Deductible (Full Sequence)
Put the whole process together so the order is automatic.
Building value $600,000 ; coinsurance 90% ; policy limit $450,000 ; loss $120,000 ; deductible $2,500 .
Amount Required = $600,000 x 90% = $540,000 .
Ratio = $450,000 / $540,000 = 0.8333 .
Penalty result = 0.8333 x $120,000 = $100,000 .
This is below the $450,000 limit, so no limit cap applies.
Subtract the deductible last: $100,000 - $2,500 = $97,500 paid.
Note the deductible comes off after the coinsurance math, never before. Reversing that order is a deliberate distractor on the exam.
Coinsurance Pitfalls and Exam Traps
Keep these distinctions straight:
Coinsurance compares policy limit to required value , not to the loss. Many wrong answers divide the limit by the loss.
Carrying more than the required amount does not increase recovery beyond the policy limit; over-insuring wastes premium.
The penalty is judged using the property's value at the time of loss , which can rise with inflation — an inflation guard endorsement helps keep the policy at the required percentage.
Homeowners forms use a built-in 80% replacement-cost provision : insure the dwelling to at least 80% of replacement cost to collect full replacement cost on partial losses; fall below and partial losses settle on the lesser of ACV or a proportional amount.
Whenever a stem says "agreed value," the coinsurance penalty is off the table by design.
Quick Reference: Reading a Coinsurance Question
When a question gives you a property value, a coinsurance percentage, the amount carried, a loss, and possibly a deductible, work the four steps in order every time:
Required amount = property value x coinsurance percent.
Coinsurance ratio = amount carried / amount required (cap at 1.0; never pay a bonus for over-insuring).
Pre-deductible payment = ratio x loss.
Final payment = pre-deductible payment minus deductible, never exceeding the policy limit.
The most missed step is the cap at 1.0: if the insured carried more than required, the ratio is treated as 1.00, the penalty disappears, and the loss is paid in full up to the limit (less deductible). Examiners also slip in a total loss — at a total loss the coinsurance clause is often satisfied automatically up to the limit, so the insured collects the policy limit rather than a penalized amount.