Study guide
1.3 Legal Descriptions and Surveys
Wyoming Real Estate Salesperson Exam
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
How This Guide Maps to the Wyoming Salesperson Exam
2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use
1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances
3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title
2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording
4 National Portion: Chapter 3: Property Value & Appraisal
3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs
5 National Portion: Chapter 4: Real Estate Contracts & Agency
4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure
6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)
5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management
7 National Portion: Chapter 6: Property Disclosures & Environmental Issues
6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability
8 National Portion: Chapter 7: Financing & Settlement
7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations
9 National Portion: Chapter 8: Real Estate Math Calculations
8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math
10 Chapter 1: Wyoming Real Estate Commission & Licensing
1.1 Wyoming Real Estate Commission (WREC) 1.2 Wyoming License Requirements 1.3 License Maintenance and Renewal 1.4 Fair Housing & Advertising
11 Chapter 2: Agency & Disclosure Requirements
2.1 Wyoming Agency Disclosure Requirements 2.2 Wyoming Agency Relationships 2.3 Wyoming Property Disclosure Requirements
12 Chapter 3: Wyoming Contracts & Property Law
3.1 Wyoming Contract Requirements 3.2 Wyoming Property Law Basics 3.3 Closing, Settlement & Property Taxes
13 Chapter 4: Trust Accounts, Discipline & Brokerage Operations
4.1 Wyoming Trust Account Requirements 4.2 License Law Violations & Discipline 4.3 Brokerage Operations & Supervision
1.3 Legal Descriptions and Surveys
Key Takeaways Explain This Topic AI
Three accepted methods of legal description: metes-and-bounds, rectangular (government) survey, and lot-and-block (recorded plat).
Metes-and-bounds uses a point of beginning (POB), directions, and distances, and must always return to the POB to close.
In the rectangular survey system a section equals 1 square mile = 640 acres; a township is 6 miles square = 36 sections.
1 acre = 43,560 square feet — the most-tested constant in real estate math.
A datum and benchmarks establish elevation for condominium air lots and subsurface rights.
Last updated: June 2026
Three Methods of Legal Description
A street address is not a legal description. The law recognizes three methods that precisely identify a parcel:
Method How it works Where used
Metes and bounds Boundary lines by direction (bearings) and distance, starting and ending at a point of beginning Original 13 colonies, irregular parcels
Rectangular (government) survey Grid of principal meridians (N-S) and base lines (E-W) forming townships and sections Most states west of the Appalachians
Lot and block (recorded plat) References a lot and block number on a recorded subdivision plat map Subdivisions everywhere
Metes and Bounds
A metes-and-bounds description begins at a point of beginning (POB) , traces each boundary by compass bearing and length ("thence N 45° E, 200 feet..."), and must close by returning to the POB. A description that does not return to the POB is defective. Monuments (an iron pin, a tree, a road) may mark corners; when a monument conflicts with a stated distance, the monument generally controls .
Rectangular (Government) Survey System
Land is laid out on a grid of principal meridians (running north-south) and base lines (running east-west). The grid creates:
Townships: 6 miles by 6 miles = 36 square miles , divided into 36 sections.
Sections: 1 mile by 1 mile = 1 square mile = 640 acres . Sections are numbered 1–36 in a boustrophedon (back-and-forth) pattern, starting in the northeast corner.
Worked Acreage Problems
The foundational constant: 1 acre = 43,560 square feet .
Problem 1 — fractional section. How many acres is "the NW 1/4 of the SE 1/4 of Section 12"? Multiply the fractions: 1/4 × 1/4 = 1/16. Then 640 acres ÷ 16 = 40 acres .
Problem 2 — nested fraction. "The S 1/2 of the NW 1/4 of the NE 1/4." Multiply: 1/2 × 1/4 × 1/4 = 1/32. Then 640 ÷ 32 = 20 acres .
Problem 3 — lot size in square feet. A rectangular lot is 0.5 acre. How many square feet? 0.5 × 43,560 = 21,780 sq ft .
Shortcut: to read any government-survey call, read it backwards (largest unit last) and multiply all the fractional denominators, then divide 640 by that product.