Study guide

1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads

South Africa K53 Learner's Licence Test — Code 10 Heavy Rigid Vehicle

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Vehicle Categories & Heavy Vehicle Operating Foundations

1.1 K53 Test Format, DLTC Computerised Testing & Code 10/C1/C Scope 1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads 1.3 Driver Prerequisites: Medical Standards, PrDP Requirements & Alcohol/Drug Limits

2 Chapter 2: Core Road Rules, Speed Limits & Following Distances

2.1 South African Speed Limits & The 80 km/h Heavy Goods Vehicle Ceiling 2.2 Heavy Vehicle Following Distances: The 3-Second Rule & Adverse Conditions 2.3 Lane Discipline, Keeping Left & Freeway Operating Rules 2.4 Permissible Left-Side Passing & Daytime Yellow-Line Shoulder Driving

3 Chapter 3: Maneuvers, Intersections & Right-of-Way Rules

3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations 3.2 Four-Way Stops, Uncontrolled Intersections & Priority Rules 3.3 Traffic Circles, Mini-Roundabouts & Pedestrian Crossings 3.4 Reversing, Towing Rules & Emergency Triangle Deployment

4 Chapter 4: Stopping, Parking & Heavy Vehicle Hazard Management

4.1 Stopping Prohibitions, Clearways & Freeway Emergency Protocols 4.2 Parking Restrictions, Kerb Markings & Heavy Vehicle Wheel Chocking 4.3 Mountain Passes, Steep Descents & Arrestor Bed Management 4.4 Accident Scene Duties, Emergency Protocol & Reporting Deadlines

5 Chapter 5: Vehicle Dimensions, Load Restrictions & Equipment Requirements

5.1 Maximum Heavy Vehicle Dimensions: Height, Width & Length Regulations 5.2 Load Projections, Overhang Limits & Red Flag/Lamp Warning Standards 5.3 Load Securing, Weight Distribution & Retro-Reflective Contour Tape

6 Chapter 6: Regulatory Signs — Control, Command & Reservation

6.1 Control Signs: Stop, Yield, No Entry & One-Way Roadways 6.2 Command Signs: Minimum Speed, Switch Headlamps On & Heavy Vehicle Routing 6.3 Reservation Signs: Bus Lanes, Minibus Lanes & Heavy Vehicle Loading Zones 6.4 Exclusive Use, Toll Road & Comprehensive Regulatory Signage

7 Chapter 7: Regulatory Signs — Prohibitions & Class Restrictions

7.1 Vehicle Prohibitions: No Heavy Vehicles, No Goods Vehicles & Mass Limits 7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions 7.3 Height, Width & Length Limit Signs (R204, R205, R239) 7.4 Parking Prohibitions, Stopping Prohibitions & Derestriction Signs

8 Chapter 8: Warning Signs & Traffic Signals

8.1 Road Layout & Physical Hazard Warning Signs (Curves, Junctions & Gradients) 8.2 Heavy Vehicle Specific Warning Signs: Arrestor Beds, Low Clearance & Side Winds 8.3 Environmental, Animal & Railway Level Crossing Warning Signs 8.4 Traffic Light Signals, Protected Turn Arrows & Overhead Lane Controls

9 Chapter 9: Road Surface Markings & Guidance Signs

9.1 Longitudinal Dividing Lines: Solid Barrier Lines & Broken Guidance Lines 9.2 Transverse Markings, Stop/Yield Lines, Pedestrian Crossings & Painted Traffic Islands 9.3 Guidance Signs, Route Markers (N/R/M Routes), Freeway Directional Signage & Tourism Signs

10 Chapter 10: Heavy Vehicle Mechanical Controls & Cockpit Instruments

10.1 Primary Foot Controls: Clutch Operation, Service Footbrake & Accelerator 10.2 Heavy Vehicle Transmission: Manual Shifting & Range-Change / Splitter Gears 10.3 Steering Techniques, Driver Ergonomics & Defensive Observation Methods 10.4 Dashboard Instruments, Air Gauges, Warning Lights & Low Air Pressure Warning Systems

11 Chapter 11: Heavy Vehicle Braking Systems, Safety Checks & Roadworthiness

11.1 Dual-Circuit Compressed Air Brakes & Spring Parking Brakes (Maxi-Brakes) 11.2 Auxiliary Braking Systems: Engine Compression Brakes, Exhaust Brakes & Retarders 11.3 Differential Lock Mechanics, Mirror Blind Spots ("No-Zones") & Pre-Trip Roadworthiness Inspections

1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads

Key Takeaways Explain This Topic AI

Tare is the unladen mass of a roadworthy vehicle ready for service, including fluids, tools, and spare tyre, but strictly excluding passengers, driver, and payload.

Gross Vehicle Mass (GVM) is the maximum permissible total laden mass specified by the manufacturer, while Payload is calculated strictly as Controlling Road Mass minus Tare.

Gross Combination Mass (GCM) dictates the maximum permissible combined operating mass of a drawing motor vehicle coupled with one or more trailers.

Regulation 245 requires goods vehicles, buses and minibuses to carry a metal data plate imprinted with the tare (T), gross vehicle mass (GVM/BVM), gross axle and axle-unit massloads (GA/GAU), gross combination mass (GCM/BKM) and permissible maximum vehicle mass (V).

Regulation 241 sets the bridge formula: the total axle massload of any group of axles may not exceed the distance between the outer axles of that group (in metres) multiplied by 2 100, plus 18 000 kg.

Last updated: September 2026

1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads

Operating heavy commercial vehicles on South African public roads requires an exacting comprehension of vehicle mass parameters, load distribution principles, and statutory axle limits. Heavy vehicles carry immense momentum and apply severe stress to highway infrastructure. Overloaded vehicles accelerate pavement rutting, cause structural micro-cracking in concrete bridge spans, dangerously extend emergency stopping distances, and induce catastrophic thermal brake fade on prolonged descents.

To safeguard road infrastructure and ensure public safety, the National Road Traffic Act, 1996 (Act No. 93 of 1996) [NRTA] and Chapter VI, Part IV (Regulations 234–245) of the National Road Traffic Regulations, 2000 establish rigorous statutory mass definitions, display rules, and axle loading limitations.

Statutory Mass Terminology and Legal Definitions

Section 1 and Chapter VI of the National Road Traffic Regulations define the core mass parameters utilized across vehicle registration documentation, weighbridge dockets, and vehicle data plates. +-------------------------------------------------------------------------+

  • | HEAVY VEHICLE MASS ANATOMY |
  • +-------------------------------------------------------------------------+
  • | |
  • | [ TARE (Unladen Mass - T) ] |
  • | Ready for road + Engine Coolant + Full Fuel + Lubricants + Spare Tyre |
  • | + Factory Tools (Strictly excludes: Driver, Crew, Payload) |
  • | |
  • | + [ PAYLOAD (Goods / Cargo) ] |
  • | Commercial freight, containers, bulk aggregates, liquids, timber |
  • | |
  • | + [ DRIVER & CREW ] |
  • | |
  • | ----------------------------------------------------------------- |
  • | = GROSS VEHICLE MASS (GVM / BVM) |
  • | Total laden mass of the single rigid vehicle (Design Ceiling) |
  • | |
  • | + [ TRAILER MASS + TRAILER CARGO ] |
  • | ----------------------------------------------------------------- |
  • | = GROSS COMBINATION MASS (GCM / BKM) |
  • | Total combined laden mass of drawing truck + all coupled trailers |
  • | |
  • +-------------------------------------------------------------------------+
  • 1. Tare (T / Tarra)

Statutory Definition: The mass of a motor vehicle designed to carry goods or passengers, in an unladen condition and ready for normal operation on a public road.

Statutory Inclusions: Includes the mass of the chassis, cab, permanent body, engine, spare wheel, factory-supplied tools, lubricants, hydraulic fluid, full capacity of engine coolant, and the full capacity of fuel in all fitted fuel tanks.

Statutory Exclusions: Explicitly excludes the mass of the driver, any crew members, passengers, and any goods, merchandise, freight, luggage, or temporary equipment being transported.

2. Gross Vehicle Mass (GVM / BVM - Bruto Voertuigmassa)

Statutory Definition: The maximum permissible total mass of the motor vehicle and its load, as specified by the vehicle manufacturer and officially registered on the eNaTIS vehicle register.

Engineering & Safety Role: GVM establishes the absolute structural design threshold of the vehicle's chassis rail yield strength, suspension spring packs, axle beams, wheel bearings, and braking energy dissipation capacity. Operating a vehicle at a laden mass exceeding its registered GVM is a severe criminal offense under Regulation 239 .

3. Gross Combination Mass (GCM / BKM - Bruto Kombinasiemassa)

Statutory Definition: The maximum permissible combined operating mass of a drawing motor vehicle coupled with any trailer(s) and their respective loads, as determined and certified by the vehicle manufacturer.

Operational Function: For rigid heavy vehicles (Code C1/C), GCM establishes whether the truck possesses the powertrain torque, transmission gearing, cooling capacity, and emergency braking systems required to safely tow a coupled trailer.

4. Gross Axle Massload (GA) & Gross Axle Unit Massload (GAU)

Gross Axle Massload (GA / Bruto Asmassa): The maximum mass that may be transmitted to the road surface by a single axle (steering axle or drive axle) according to the manufacturer's technical specifications and road design limitations.

Gross Axle Unit Massload (GAU / Bruto Aseenheidmassa): The maximum permissible load transmitted to the road surface by an axle unit consisting of two or more consecutive axles (such as a tandem axle unit with two axles, or a tridem axle unit with three axles).

5. Permissible Road Authority Mass Limits (V, A, U)

South African transport law draws a fundamental distinction between manufacturer design limits (GVM, GA, GAU) and statutory road authority limits (designated as V for vehicle mass, A for single axle mass, and U for axle unit mass). The road limits are designed to protect pavement infrastructure:

Regulation 240 keys every limit to two things only: how many wheels are on the axle, and whether it steers. Suspension type is irrelevant in South African law — there is no "road-friendly suspension" bonus here, and answering that there is will cost you the mark.

  • Configuration Steering? Regulation 240 ceiling Paragraph
  • One wheel on a steering axle Yes 3 850 kg wheel massload 240(a)(i)
  • One wheel on any other axle No 4 000 kg wheel massload 240(a)(ii)
  • Single axle, 2 or 3 wheels Yes 7 700 kg 240(b)(i)
  • Single axle, 2 or 3 wheels No 8 000 kg 240(b)(ii)
  • Single axle, 4 wheels (typical drive axle) No 9 000 kg 240(c)(v)
  • Tandem unit, 2 axles of 2 or 3 wheels each Yes 15 400 kg 240(d)(i)
  • Tandem unit, 2 axles of 2 or 3 wheels each No 16 000 kg 240(d)(ii)
  • Tandem unit, 2 axles of 4 wheels each No 18 000 kg 240(e)(iii)
  • Tridem or larger unit, axles of 2 or 3 wheels each Yes 23 100 kg 240(f)(i)
  • Tridem or larger unit, axles of 2 or 3 wheels each No 24 000 kg 240(f)(ii)

The examination trap is the tandem. A tandem carrying four wheels on each axle — the standard twin-tyred drive bogie on a three-axle rigid freight truck — is allowed 18 000 kg under Regulation 240(e)(iii). The 16 000 kg figure belongs to a tandem whose axles carry only two or three wheels each, under Regulation 240(d)(ii). Reading the tyres, not the suspension, gets you the right number.

Specialised bodies get relief on the single four-wheel axle. Regulation 240(c) lifts the 9 000 kg figure to 10 200 kg for a refuse compactor carrying refuse, a breakdown vehicle, a bus, and the rear or middle axle of a bus-train. A rigid goods truck gets none of these.

Wheel massloads bind independently. Even a compliant axle total is unlawful if one wheel carries more than 3 850 kg (steering) or 4 000 kg (non-steering) under Regulation 240(a).

Important

The Controlling Mass Principle: Under Regulation 239, a heavy vehicle may never exceed the lesser of the manufacturer rating and the statutory road authority limit . If a truck has a manufacturer GVM of 16 000 kg, but the road classification or tyre load rating restricts it to 14 500 kg, the legal operating ceiling is strictly 14 500 kg.

Technical Mass Term Afrikaans Term Abbreviation Components Included Components Excluded

Tare Tarra T Chassis, body, fuel, lubricants, coolant, spare tyre, standard tools Driver, crew, passengers, freight/cargo

Gross Vehicle Mass Bruto Voertuigmassa GVM / BVM Tare mass + maximum allowable payload + driver + crew Coupled trailers and trailer payloads

Gross Combination Mass Bruto Kombinasiemassa GCM / BKM Drawing vehicle GVM + all coupled trailers + all payloads N/A (Total combination limit)

Gross Axle Massload Bruto Asmassa GA Proportion of vehicle and cargo mass transmitted through a single axle Mass carried by other axles

Gross Axle Unit Massload Bruto Aseenheidmassa GAU Proportion of mass transmitted through multi-axle unit (tandem/tridem) Mass carried by external axles

The Vehicle Information Plate (Data Plate) & Regulation 245

Pursuant to Regulation 245 of the National Road Traffic Regulations , every bus, minibus, and goods vehicle with a Gross Vehicle Mass exceeding 3 500 kg must have a durable, indelible metal data plate permanently affixed to the vehicle.

Physical and Display Specifications

Location: Regulation 245(1)(b) requires the particulars to be clearly imprinted or stamped on a metal plate or plates affixed in an accessible place on a door post, under the bonnet, or on the dashboard — and, in the case of a trailer, in any conspicuous place on the left side. Regulation 245 prescribes no minimum letter height ; what it demands is that the particulars are clearly imprinted or stamped and remain legible.

Mandatory Stamped Parameters (Regulation 245(1)(b)(i)–(ix)):

T — the tare in kilograms.

GVM / BVM — the gross vehicle mass in kilograms.

GA / BA and GAU / BAE — the gross axle massload or gross axle unit massload of each axle or axle unit in kilograms.

GKM / BSM — on a semi-trailer, the gross kingpin massload specified by the manufacturer.

GCM / BKM — the gross combination mass, where the vehicle is used to draw another vehicle.

The net power in kilowatts where applicable, determined under code of practice SABS 013.

V — the permissible maximum vehicle mass referred to in Regulation 236 (not applicable to a semi-trailer).

A and AU / AE — the permissible maximum axle massload (Regulation 234) or axle unit massload (Regulation 235) of each axle or axle unit.

D / T — the permissible maximum drawing vehicle mass referred to in Regulation 244(c).

Tip

Note what is not on the Regulation 245 list: the manufacturer's name and the VIN or chassis number are identification data that live on the vehicle's own identification plate and registration certificate, not on the statutory mass plate. The mass plate is a mass document , and every letter pair on it is a mass figure.

Note

If the metal data plate is missing, defaced, illegible, or altered, the vehicle will fail a statutory roadworthiness examination (Certificate of Roadworthiness — COR), and a traffic officer who finds the vehicle unroadworthy may act under section 44 of the National Road Traffic Act to issue a written discontinuation-of-use notice , prohibiting further operation until the defect is rectified and the vehicle is re-examined.

Overloading Control, Weighbridge Protocols & The Bridge Formula

South Africa operates an extensive national network of high-technology Traffic Control Centres (TCCs) and weighbridges strategically positioned along major freight freight corridors (e.g., the N1, N3, N4, and N12). These facilities utilize both static balance-beam weighbridges and high-speed Weigh-in-Motion (WIM) electronic piezoelectric sensors embedded in freeway lanes.

1. Weigh-in-Motion (WIM) Screening vs. Static Weighing

As a heavy vehicle passes an advance weigh station, automated WIM sensors measure dynamic axle weights at highway speeds. Overhead automated number plate recognition (ANPR) cameras identify the truck.

If axle readings or estimated gross mass exceed legal limits, electronic variable message signs (VMS) instruct the truck driver to divert into the static weighbridge testing bay.

On the multi-draft static weighbridge, official legal weights are captured for individual axles, axle units, and the overall vehicle.

2. The 5% Weighing Tolerance & Mandatory Offloading

Weighbridge Tolerance: South African traffic law provides a 5% technical weighing tolerance to account for scale calibration variance, road gradient shifts, dynamic fuel slosh, and atmospheric moisture changes.

Mandatory Offloading: If an overloaded vehicle exceeds the 5% threshold, the vehicle is legally prohibited from moving back onto a public road . The driver must park in the weighbridge impound yard until a secondary vehicle arrives and the excess load is physically offloaded or redistributed.

Multi-Party Criminal Liability: Under the NRTA and AARTO frameworks, liability for overloading extends beyond the driver. The registered operator, the consignor (loader), and the consignee (receiver) can all face severe statutory fines and prosecution.

3. The Bridge Formula (Regulation 241)

Road pavements and bridge structures are highly vulnerable to concentrated point loads. Even if a truck's total mass is within its registered GVM, concentrating too much mass across closely spaced axles can shear concrete bridge spans and collapse culverts. The Bridge Formula (Regulation 241) dictates the maximum permissible mass ( M M M ) based on the distance ( L L L ) in metres between the outer axles of any axle group: Permissible Mass (kg) = 18 000 + ( 2 100 × L ) \text{Permissible Mass (kg)} = 18\,000 + (2\,100 \times L) Permissible Mass (kg) = 18 000 + ( 2 100 × L )

Where:

18 000 18\,000 18 000 is the base mass allowance in kilograms.

L L L is the distance in metres measured between the centers of the extreme axles of the group being assessed.

2 100 2\,100 2 100 is the incremental load factor per linear metre of axle spacing.

Practical Mathematical Scenarios for Heavy Vehicle Drivers

A professional heavy vehicle driver must verify mathematical compliance before dispatch. Below are the three critical calculations tested in commercial transport operations.

Scenario 1: Calculating Maximum Legal Payload Maximum Legal Payload = Controlling Permissible Laden Mass - Tare

Given Vehicle Data:

  • Tare (T) = 5 800 kg 5\,800\text{ kg} 5 800 kg
  • Manufacturer GVM = 15 500 kg 15\,500\text{ kg} 15 500 kg
  • Permissible Road Mass Limit ( V V V ) = 14 500 kg 14\,500\text{ kg} 14 500 kg

Step 1: Determine the controlling maximum laden limit. The vehicle cannot legally exceed the lesser of the manufacturer GVM and the road authority cap V V V . Thus, controlling limit = 14 500 kg 14\,500\text{ kg} 14 500 kg .

Step 2: Calculate maximum legal payload: Payload = 14 500 kg − 5 800 kg = 8 700 kg \text{Payload} = 14\,500\text{ kg} - 5\,800\text{ kg} = 8\,700\text{ kg} Payload = 14 500 kg − 5 800 kg = 8 700 kg

If the operator attempts to load 9 700 kg 9\,700\text{ kg} 9 700 kg based on the manufacturer's 15 500 kg 15\,500\text{ kg} 15 500 kg GVM, the truck will violate the 14 500 kg 14\,500\text{ kg} 14 500 kg road limit and be detained at the first weighbridge.

Scenario 2: The Axle Overload Distribution Trap

A two-axle rigid truck has a registered Tare of 5 000 kg 5\,000\text{ kg} 5 000 kg and a GVM of 14 000 kg 14\,000\text{ kg} 14 000 kg .

  • Front Steering Axle Rating (GA 1) = 5 000 kg 5\,000\text{ kg} 5 000 kg
  • Rear Drive Axle Rating (GA 2) = 9 000 kg 9\,000\text{ kg} 9 000 kg
  • Total Cargo Loaded = 8 000 kg 8\,000\text{ kg} 8 000 kg

Total Vehicle Mass = 5 000 kg + 8 000 kg = 13 000 kg 5\,000\text{ kg} + 8\,000\text{ kg} = 13\,000\text{ kg} 5 000 kg + 8 000 kg = 13 000 kg (Complies with 14 000 kg 14\,000\text{ kg} 14 000 kg GVM).

The Overload Hazard: If the cargo is positioned too far back towards the rear overhang, the rear drive axle carries 9 800 kg 9\,800\text{ kg} 9 800 kg , while the front steering axle carries only 3 200 kg 3\,200\text{ kg} 3 200 kg . Although the total truck mass ( 13 000 kg 13\,000\text{ kg} 13 000 kg ) is 1 000 kg 1\,000\text{ kg} 1 000 kg below GVM, the rear axle is overloaded by 800 kg 800\text{ kg} 800 kg ( 9 800 kg 9\,800\text{ kg} 9 800 kg vs 9 000 kg 9\,000\text{ kg} 9 000 kg limit). The vehicle will be cited and impounded for an illegal axle massload!

Scenario 3: Under-loading the Steering Axle

Regulation 242 attacks the problem from the opposite end to Regulation 240: instead of capping what an axle may carry, it sets a floor under the steering end, so that cargo loaded far back cannot lever weight off the front and rob the driver of steering authority. It prescribes two different floors, and neither of them is 20% :

Regulation 242(b) — articulated combinations: 11%. Where the combination is a truck-tractor with at least one semi-trailer, the axle massload of the steering axle (or the sum of a steering axle unit) may not be less than 11% of the sum of all axle massloads of the truck-tractor and the first semi-trailer coupled to it.

Regulation 242(c) — a vehicle with a steering axle unit : 30%. For a motor vehicle that is not such a combination and that has a steering axle unit — a twin-steer front bogie — the sum of that unit's axle massloads may not be less than 30% of the sum of all axle massloads of the vehicle.

Regulation 242(a) — side-to-side balance. On an axle with two tyres, one wheel may not carry more than 10% more than the other; on an axle with four tyres, the two tyres nearest each other may not carry more than 10% more than the other two.

A conventional single-steering-axle rigid Code 10 truck does not have a steering axle unit , so Regulation 242(c) does not bite on it — but the physics does. If cargo placed behind the rear axle acts as a lever, lifting weight off the front axle, the vehicle loses steering authority, experiences severe understeer, and can suffer front-tyre aquaplaning in wet weather. Load front-to-back against the axle plate figures, not by eye.

Damage to Public Roads: The Driver's Personal Liability

Mass rules exist because heavy vehicles damage road structures, and South African law closes the loop by making that damage an offence in its own right rather than merely an engineering consequence.

Causing damage is prohibited. No person may operate a vehicle on a public road in a manner that damages the road surface, a bridge, a culvert, a kerb or any other part of the road structure. Metal tyres, dragging chains, unsprung tracked equipment and grounded trailer legs all fall squarely inside this rule.

Spillage is damage. Regulation 308(1)(m) forbids negligently or wilfully depositing petrol, diesel, oil, grease, flammable or offensive matter, ashes or refuse from a vehicle onto or alongside a public road. A leaking hydraulic line or an untarped load of aggregate is not simply untidy; it destroys surface grip and is chargeable.

The cost follows the operator. Where a road authority repairs damage caused by an overloaded or improperly operated vehicle, the registered operator carries the liability, which is why operator cards are suspended over repeat overload offences rather than only the driver being fined.

Why the axle matters more than the total. Because pavement damage rises with roughly the fourth power of axle massload, a single badly distributed axle can do more structural harm than an entire correctly loaded truck. This is the engineering reason that an R203 axle mass limit sign is enforced independently of an R202 mass limit sign.