Study guide

3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations

South Africa K53 Learner's Licence Test — Code 10 Heavy Rigid Vehicle

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Vehicle Categories & Heavy Vehicle Operating Foundations

1.1 K53 Test Format, DLTC Computerised Testing & Code 10/C1/C Scope 1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads 1.3 Driver Prerequisites: Medical Standards, PrDP Requirements & Alcohol/Drug Limits

2 Chapter 2: Core Road Rules, Speed Limits & Following Distances

2.1 South African Speed Limits & The 80 km/h Heavy Goods Vehicle Ceiling 2.2 Heavy Vehicle Following Distances: The 3-Second Rule & Adverse Conditions 2.3 Lane Discipline, Keeping Left & Freeway Operating Rules 2.4 Permissible Left-Side Passing & Daytime Yellow-Line Shoulder Driving

3 Chapter 3: Maneuvers, Intersections & Right-of-Way Rules

3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations 3.2 Four-Way Stops, Uncontrolled Intersections & Priority Rules 3.3 Traffic Circles, Mini-Roundabouts & Pedestrian Crossings 3.4 Reversing, Towing Rules & Emergency Triangle Deployment

4 Chapter 4: Stopping, Parking & Heavy Vehicle Hazard Management

4.1 Stopping Prohibitions, Clearways & Freeway Emergency Protocols 4.2 Parking Restrictions, Kerb Markings & Heavy Vehicle Wheel Chocking 4.3 Mountain Passes, Steep Descents & Arrestor Bed Management 4.4 Accident Scene Duties, Emergency Protocol & Reporting Deadlines

5 Chapter 5: Vehicle Dimensions, Load Restrictions & Equipment Requirements

5.1 Maximum Heavy Vehicle Dimensions: Height, Width & Length Regulations 5.2 Load Projections, Overhang Limits & Red Flag/Lamp Warning Standards 5.3 Load Securing, Weight Distribution & Retro-Reflective Contour Tape

6 Chapter 6: Regulatory Signs — Control, Command & Reservation

6.1 Control Signs: Stop, Yield, No Entry & One-Way Roadways 6.2 Command Signs: Minimum Speed, Switch Headlamps On & Heavy Vehicle Routing 6.3 Reservation Signs: Bus Lanes, Minibus Lanes & Heavy Vehicle Loading Zones 6.4 Exclusive Use, Toll Road & Comprehensive Regulatory Signage

7 Chapter 7: Regulatory Signs — Prohibitions & Class Restrictions

7.1 Vehicle Prohibitions: No Heavy Vehicles, No Goods Vehicles & Mass Limits 7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions 7.3 Height, Width & Length Limit Signs (R204, R205, R239) 7.4 Parking Prohibitions, Stopping Prohibitions & Derestriction Signs

8 Chapter 8: Warning Signs & Traffic Signals

8.1 Road Layout & Physical Hazard Warning Signs (Curves, Junctions & Gradients) 8.2 Heavy Vehicle Specific Warning Signs: Arrestor Beds, Low Clearance & Side Winds 8.3 Environmental, Animal & Railway Level Crossing Warning Signs 8.4 Traffic Light Signals, Protected Turn Arrows & Overhead Lane Controls

9 Chapter 9: Road Surface Markings & Guidance Signs

9.1 Longitudinal Dividing Lines: Solid Barrier Lines & Broken Guidance Lines 9.2 Transverse Markings, Stop/Yield Lines, Pedestrian Crossings & Painted Traffic Islands 9.3 Guidance Signs, Route Markers (N/R/M Routes), Freeway Directional Signage & Tourism Signs

10 Chapter 10: Heavy Vehicle Mechanical Controls & Cockpit Instruments

10.1 Primary Foot Controls: Clutch Operation, Service Footbrake & Accelerator 10.2 Heavy Vehicle Transmission: Manual Shifting & Range-Change / Splitter Gears 10.3 Steering Techniques, Driver Ergonomics & Defensive Observation Methods 10.4 Dashboard Instruments, Air Gauges, Warning Lights & Low Air Pressure Warning Systems

11 Chapter 11: Heavy Vehicle Braking Systems, Safety Checks & Roadworthiness

11.1 Dual-Circuit Compressed Air Brakes & Spring Parking Brakes (Maxi-Brakes) 11.2 Auxiliary Braking Systems: Engine Compression Brakes, Exhaust Brakes & Retarders 11.3 Differential Lock Mechanics, Mirror Blind Spots ("No-Zones") & Pre-Trip Roadworthiness Inspections

3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations

Key Takeaways Explain This Topic AI

Under Regulation 298 of the National Road Traffic Act, drivers must overtake on the right and may not re-enter the left lane until safely clear of the overtaken vehicle.

Regulation 298(2) prohibits overtaking when approaching the summit of a rise, a curve, or any other place where the driver's view is so restricted that passing could create a hazard.

Regulation 315(4) forbids passing any vehicle that has stopped at a pedestrian crossing to allow pedestrians to cross.

The driver of an overtaken vehicle must move to the left upon notice and must not accelerate until the overtaking vehicle has completed the pass (Regulation 298(3)).

Heavy rigid vehicles require significantly extended passing sight distances due to lower power-to-weight ratios, vehicle length, and aerodynamic bow-wave displacement.

Last updated: September 2026

3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations

Overtaking is among the highest-risk maneuvers executed on public roadways, particularly for drivers operating heavy motor vehicles (Code 10 / Class C1 and C). A heavy vehicle's substantial mass, prolonged acceleration profile, extended physical length, and limited maneuverability amplify every margin of error. In South Africa, the rules governing overtaking are codified in the National Road Traffic Act (Act 93 of 1996) and the National Road Traffic Regulations (2000) , primarily under Regulations 298, 298A, and 299 , alongside specific road marking standards defined in the South African Road Traffic Signs Manual (SARTSM) .

Mastering these statutory provisions and their physical dynamics is essential not only for achieving a passing score on the computerized K53 theory examination but also for preventing catastrophic head-on and sideswipe collisions.

1. Statutory Overtaking Protocol

Under Regulation 298(1) of the National Road Traffic Regulations, the general rule of the road requires that the driver of a vehicle intending to pass another vehicle proceeding in the same direction must pass to the right thereof at a safe distance, and must not turn toward the left side of the roadway until safely clear of the vehicle so passed.

The K53 Defensive Observation Sequence (Mirror-Signal-Maneuver)

Before any driver initiates an overtaking maneuver in a heavy vehicle, the standardized K53 defensive driving sequence must be executed flawlessly:

Rearward & Lateral Surveillance: Check the interior rearview mirror (if fitted) and both exterior wide-angle side mirrors to ensure no trailing vehicle is already overtaking or moving into your blind spot.

Blind Spot Verification: Check the vehicle's right-hand blind spot with a definite head movement toward the right side window.

Early Signaling: Activate the right direction indicator in advance (recommended minimum 3 to 5 seconds before initiating lateral movement) to clearly communicate intention to following and opposing traffic.

Forward Evaluation: Continually evaluate oncoming traffic, road geometry, gradient, and surface conditions to ensure a wide safety margin.

Lateral Transition: Steer smoothly into the overtaking lane without abrupt lateral jerks that could destabilize high-center-of-gravity freight.

Safe Lane Return: Remain in the overtaking lane until the entire overtaken vehicle is completely visible in the primary left flat mirror (and interior mirror where applicable). Check the left blind spot, signal left, and guide the vehicle smoothly back into the left lane without cutting across the overtaken vehicle's braking buffer.

2. Statutory Prohibitions on Overtaking

The National Road Traffic Regulations explicitly identify operational environments where overtaking is strictly prohibited due to sightline restrictions, structural constriction, or the presence of vulnerable road users. Committing an overtaking violation in these zones carries severe statutory penalties and incurs immediate disqualification during practical K53 testing. +-------------------------------------------------------------------------+

  • | STATUTORY OVERTAKING PROHIBITIONS |
  • | (National Road Traffic Act 93 of 1996) |
  • +-------------------------------------------------------------------------+
  • | 1. Blind Rises & Crests (Reg 298(1)(a)) --> Obstructed forward sightline |
  • | 2. Sharp Curves & Bends (Reg 298(1)(a)) --> Insufficient clear distance |
  • | 3. Solid White Barrier Line (Reg 298(1)) --> Crossing marking RM1 barred |
  • | 4. Railway Level Crossings (Reg 298(1)) --> Within 30 m of rail tracks |
  • | 5. Pedestrian Crossings (Reg 281 & 298) --> Within demarcated zones |
  • | 6. Stopped Vehicle at Crossing (Reg 281) --> NEVER pass stopped traffic |
  • | 7. Narrow Bridges & Tunnels (Reg 298) --> Constricted lateral space |
  • | 8. Impending Oncoming Hazard (Reg 298) --> Forcing evasive braking |
  • +-------------------------------------------------------------------------+
  • Detailed Analysis of Restricted Zones

Blind Rises and Crests of Hills (Regulation 298(2)): Overtaking is prohibited when approaching the crest of a rise or hill where visibility is restricted such that the driver cannot clearly observe oncoming traffic for a distance sufficient to complete the maneuver safely.

Blind Curves and Horizontal Bends: Any curve or bend where vegetation, rock cuttings, embankments, or curvature prevents an unobstructed forward view is an absolute no-passing zone.

Solid White Barrier Lines (Dividing Line RM1): Under no circumstances may a driver cross or straddle a longitudinal solid white barrier line separating opposing traffic flows to pass another vehicle. If a broken line appears on your side of a solid line (combination line RM2), overtaking is permitted only if the maneuver can be completed prior to the commencement of a continuous solid line.

Railway Level Crossings: The National Road Traffic Regulations set no specific metre buffer for overtaking at a level crossing, but Regulation 298(2) bites here in practice, and Regulation 304(g) forbids stopping within the railway reserve at a crossing. Rail crossings feature uneven track profiles, risk of sudden mechanical stall, and vision obstructions from catenary structures.

Pedestrian Crossings (Regulation 315): Passing is barred on the approach to, or within, a demarcated pedestrian crossing (the RTM3 zebra crossing or a signalised school crossing).

Stopped Vehicle at a Pedestrian Crossing (Regulation 315(4)) — Critical Exam Rule: When any vehicle has stopped at a pedestrian crossing to permit a pedestrian to cross the roadway, the driver of any other vehicle approaching from the rear shall not overtake the stopped vehicle . Violating this rule is one of the most hazardous traffic infractions, as the stopped vehicle creates a total visual obstruction concealing pedestrians from oncoming lanes.

Narrow Bridges, Subways, Tunnels, and Roadworks (Regulation 298(2), read with Regulation 296(1)): When approaching or traveling on narrow bridges, through subways, tunnels, or past road construction works where roadway width does not permit safe lateral clearance between passing vehicles.

3. Statutory Duties of the Driver Being Overtaken (Regulation 298(3))

Traffic safety during an overtaking maneuver depends equally upon the actions of the driver being passed. Regulation 298(3) defines specific statutory duties for the driver of a vehicle being overtaken:

Move to the Far Left: Upon becoming aware of an overtaking vehicle sounding a warning device or signaling an intention to pass, the driver must move their vehicle as far to the left side of the roadway as is safely practicable, without endangering their own vehicle or occupants.

Strict Ban on Acceleration: The driver being overtaken must not increase the speed of their vehicle until the overtaking vehicle has completely passed and safely returned to the lane ahead. Accelerating while being passed traps the overtaking driver in the opposing traffic lane, vastly increasing the risk of a head-on collision.

Shoulder Driving Caveat (Regulation 298A): While heavy vehicle drivers often move onto the yellow-line shoulder to allow faster traffic to pass, this is governed strictly by regulation 298A (daytime only, 150 m forward visibility, flat terrain, safe to do so) and is never compulsory . Drivers must never be forced onto an unpaved, soft, or damaged shoulder.

4. Heavy Vehicle Overtaking Physics & Dynamics

Operating a Code 10 rigid vehicle (such as a 12-tonne GVM delivery freighter or a 16-tonne rigid chassis) introduces extreme physical constraints during overtaking maneuvers that passenger car drivers do not encounter.

Operational Factor Light Motor Vehicle (Code 8 / B) Heavy Rigid Vehicle (Code 10 / C1 & C) Operational Heavy-Vehicle Implication

Power-to-Weight Ratio 80–150 kW per tonne 10–20 kW per tonne Severe acceleration lag; vehicle cannot "surge" past slow traffic.

Vehicle Length 4.0 to 5.0 metres Up to 12.5 metres (rigid) Requires 2.5 to 3 times more lane space to clear and return.

Time in Opposing Lane 4 to 8 seconds 15 to 25+ seconds Forward sightline must remain clear for up to 1 000 metres.

Aerodynamic Bow Wave Negligible air displacement Massive frontal air displacement Pushes smaller vehicles or cyclists laterally outward upon approach.

Low-Pressure Wake Minor turbulence Severe negative pressure eddy Drags adjacent light vehicles toward the truck's rear axles as passing completes.

Worked Scenario: Calculating Overtaking Distance for a Code 10 Truck

Consider a 12.5-metre heavy rigid truck traveling at 70 km/h (19.4 m/s) attempting to overtake an agricultural tractor traveling at 30 km/h (8.3 m/s). The relative closing speed is: Δ v = 70 − 30 = 40 km/h ≈ 11.1 m/s \Delta v = 70 - 30 = 40\text{ km/h } \approx 11.1\text{ m/s} Δ v = 70 − 30 = 40 km/h ≈ 11.1 m/s

To initiate the maneuver from a 3-second safety cushion behind the tractor (approx. 25 m), clear the tractor (approx. 5 m), clear the truck's own length (12.5 m), and establish a 3-second cushion ahead (approx. 58 m), the truck must cover an effective relative clearance distance of: D rel = 25 + 5 + 12.5 + 58 = 100.5 metres D_{\text{rel}} = 25 + 5 + 12.5 + 58 = 100.5\text{ metres} D rel ​ = 25 + 5 + 12.5 + 58 = 100.5 metres Time required t = 100.5 m 11.1 m/s ≈ 9.05 seconds \text{Time required } t = \frac{100.5\text{ m}}{11.1\text{ m/s}} \approx 9.05\text{ seconds} Time required t = 11.1 m/s 100.5 m ​ ≈ 9.05 seconds

During these 9.05 seconds, the heavy truck traveling at 70 km/h (19.4 m/s) covers: D ground = 19.4 m/s × 9.05 s ≈ 176 metres D_{\text{ground}} = 19.4\text{ m/s} \times 9.05\text{ s} \approx 176\text{ metres} D ground ​ = 19.4 m/s × 9.05 s ≈ 176 metres

If an oncoming vehicle is approaching at 100 km/h (27.8 m/s), that vehicle will travel: D oncoming = 27.8 m/s × 9.05 s ≈ 252 metres D_{\text{oncoming}} = 27.8\text{ m/s} \times 9.05\text{ s} \approx 252\text{ metres} D oncoming ​ = 27.8 m/s × 9.05 s ≈ 252 metres

Adding a mandatory safety buffer of 100 metres, the truck driver requires a minimum unobstructed sightline of: 176 + 252 + 100 = 528 metres 176 + 252 + 100 = 528\text{ metres} 176 + 252 + 100 = 528 metres

If the overtaken vehicle is traveling at 60 km/h instead of 30 km/h, the required sightline expands to more than 1 100 metres ! Heavy vehicle drivers must therefore rarely attempt overtaking on two-lane undivided rural highways unless the overtaken vehicle is traveling at exceptionally low speeds.

Aerodynamic Turbulence and Vulnerable Users

A heavy flat-nosed truck pushes a massive column of high-pressure air ahead of its cab (the bow wave ). When passing a cyclist, pedestrian, or motorcycle, this bow wave can push the vulnerable user off the road surface. Conversely, as the truck passes, the low-pressure vortex trailing the vehicle can pull the cyclist inward toward the dual-wheel assemblies. Heavy vehicle drivers must provide a minimum lateral clearance of 1.5 metres when passing cyclists and vulnerable road users.

5. K53 Testing Pitfalls & Exam Traps

Exam Trap Alert: The K53 test frequently poses questions regarding when it is permissible to overtake on the left. Passing on the left is permitted only under narrow statutory exceptions (covered in Section 2.4, such as when the overtaken vehicle is signaling and turning right, or on a multi-lane one-way roadway). Do not confuse these exceptions with general passing rules on two-way undivided roads!

Crucial Rule on Stopped Vehicles: The question "When may you overtake a vehicle stopped at a pedestrian crossing?" has only one legally correct answer: NEVER . Even if no pedestrians are visible from your cab position, passing a vehicle stopped at a crossing is strictly prohibited by law.