Study guide
7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions
South Africa K53 Learner's Licence Test — Code 10 Heavy Rigid Vehicle
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Vehicle Categories & Heavy Vehicle Operating Foundations
1.1 K53 Test Format, DLTC Computerised Testing & Code 10/C1/C Scope 1.2 Mass Classifications: Tare, GVM, GCM & Axle Massloads 1.3 Driver Prerequisites: Medical Standards, PrDP Requirements & Alcohol/Drug Limits
2 Chapter 2: Core Road Rules, Speed Limits & Following Distances
2.1 South African Speed Limits & The 80 km/h Heavy Goods Vehicle Ceiling 2.2 Heavy Vehicle Following Distances: The 3-Second Rule & Adverse Conditions 2.3 Lane Discipline, Keeping Left & Freeway Operating Rules 2.4 Permissible Left-Side Passing & Daytime Yellow-Line Shoulder Driving
3 Chapter 3: Maneuvers, Intersections & Right-of-Way Rules
3.1 Overtaking Regulations, Blind Rises & Prohibited Passing Situations 3.2 Four-Way Stops, Uncontrolled Intersections & Priority Rules 3.3 Traffic Circles, Mini-Roundabouts & Pedestrian Crossings 3.4 Reversing, Towing Rules & Emergency Triangle Deployment
4 Chapter 4: Stopping, Parking & Heavy Vehicle Hazard Management
4.1 Stopping Prohibitions, Clearways & Freeway Emergency Protocols 4.2 Parking Restrictions, Kerb Markings & Heavy Vehicle Wheel Chocking 4.3 Mountain Passes, Steep Descents & Arrestor Bed Management 4.4 Accident Scene Duties, Emergency Protocol & Reporting Deadlines
5 Chapter 5: Vehicle Dimensions, Load Restrictions & Equipment Requirements
5.1 Maximum Heavy Vehicle Dimensions: Height, Width & Length Regulations 5.2 Load Projections, Overhang Limits & Red Flag/Lamp Warning Standards 5.3 Load Securing, Weight Distribution & Retro-Reflective Contour Tape
6 Chapter 6: Regulatory Signs — Control, Command & Reservation
6.1 Control Signs: Stop, Yield, No Entry & One-Way Roadways 6.2 Command Signs: Minimum Speed, Switch Headlamps On & Heavy Vehicle Routing 6.3 Reservation Signs: Bus Lanes, Minibus Lanes & Heavy Vehicle Loading Zones 6.4 Exclusive Use, Toll Road & Comprehensive Regulatory Signage
7 Chapter 7: Regulatory Signs — Prohibitions & Class Restrictions
7.1 Vehicle Prohibitions: No Heavy Vehicles, No Goods Vehicles & Mass Limits 7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions 7.3 Height, Width & Length Limit Signs (R204, R205, R239) 7.4 Parking Prohibitions, Stopping Prohibitions & Derestriction Signs
8 Chapter 8: Warning Signs & Traffic Signals
8.1 Road Layout & Physical Hazard Warning Signs (Curves, Junctions & Gradients) 8.2 Heavy Vehicle Specific Warning Signs: Arrestor Beds, Low Clearance & Side Winds 8.3 Environmental, Animal & Railway Level Crossing Warning Signs 8.4 Traffic Light Signals, Protected Turn Arrows & Overhead Lane Controls
9 Chapter 9: Road Surface Markings & Guidance Signs
9.1 Longitudinal Dividing Lines: Solid Barrier Lines & Broken Guidance Lines 9.2 Transverse Markings, Stop/Yield Lines, Pedestrian Crossings & Painted Traffic Islands 9.3 Guidance Signs, Route Markers (N/R/M Routes), Freeway Directional Signage & Tourism Signs
10 Chapter 10: Heavy Vehicle Mechanical Controls & Cockpit Instruments
10.1 Primary Foot Controls: Clutch Operation, Service Footbrake & Accelerator 10.2 Heavy Vehicle Transmission: Manual Shifting & Range-Change / Splitter Gears 10.3 Steering Techniques, Driver Ergonomics & Defensive Observation Methods 10.4 Dashboard Instruments, Air Gauges, Warning Lights & Low Air Pressure Warning Systems
11 Chapter 11: Heavy Vehicle Braking Systems, Safety Checks & Roadworthiness
11.1 Dual-Circuit Compressed Air Brakes & Spring Parking Brakes (Maxi-Brakes) 11.2 Auxiliary Braking Systems: Engine Compression Brakes, Exhaust Brakes & Retarders 11.3 Differential Lock Mechanics, Mirror Blind Spots ("No-Zones") & Pre-Trip Roadworthiness Inspections
7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions
Key Takeaways Explain This Topic AI
Sign R214 (overtaking prohibited) bars every class of vehicle from overtaking moving traffic, and the official manual records that the prohibition runs for the next 500 metres.
Sign R215 tells the driver of a heavy motor vehicle not to overtake another heavy vehicle, while leaving passenger cars free to overtake if road markings allow.
Sign R213 (No U-Turn) imposes an absolute legal ban on reversing direction; heavy rigid vehicles must never attempt multi-point turns across live traffic lanes due to massive swept paths and broadside collision risks.
Turning prohibition signs (Sign R211 No Left Turn and Sign R212 No Right Turn) eliminate severe collision hazards arising from swept path intrusion and rear tail swing at constricted junctions.
Under Regulation 226, heavy rigid trucks may exhibit rear overhang up to 60% of their wheelbase, creating an outward tail swing of up to 1.2 metres that threatens adjacent traffic during sharp turning maneuvers.
Last updated: September 2026
7.2 Movement Prohibitions: No Overtaking, No U-Turn & Turning Restrictions
While class and mass prohibition signs regulate access to specific road infrastructure, Movement Prohibition Signs regulate dynamic vehicular maneuvers. For drivers of Code 10 / C1 / C heavy rigid vehicles, dynamic maneuvers—such as overtaking, turning across opposing traffic, or reversing direction—carry disproportionately high risk. A fully laden rigid truck measuring 10 to 12.5 metres in length and weighing 16 tonnes cannot accelerate, turn, or stop like a passenger car.
Under section 58 of the National Road Traffic Act and the rules of the road in Chapter X of the National Road Traffic Regulations, 2000, movement prohibition signs establish strict, non-negotiable boundaries on vehicle operation. Ignoring these signs can cause catastrophic head-on collisions, underride accidents, and systemic urban traffic gridlock.
Overtaking Prohibitions: General vs Goods Vehicle Bans
South African road traffic law provides two distinct regulatory signs governing overtaking maneuvers. Differentiating between these signs is a frequent testing focus on the K53 Code 10 driver licensing examination. +-------------------------------------------------------------------------+
- | SARTSM OVERTAKING PROHIBITION SIGNS |
- +-------------------------------------------------------------------------+
- | |
- | SIGN R214: NO OVERTAKING SIGN R215: NO OVERTAKING |
- | (ALL VEHICLES) BY A HEAVY VEHICLE OF |
- | ANOTHER HEAVY VEHICLE |
- | |
- | /-------\ /-------\ |
- | / RED \ / RED \ |
- | | [BLACK][RED| | [TRUCK][RED| |
- | | CAR] [CAR| | SILH] [CAR| |
- | \ / \ / |
- | \-------/ \-------/ |
- | |
- | Bans ALL vehicles from Bans ONLY goods vehicles |
- | overtaking any moving (>3 500 kg GVM) from |
- | vehicle on this stretch. overtaking. Cars may pass. |
- | |
- +-------------------------------------------------------------------------+
- 1. No Overtaking Sign (R214)
Visual Appearance: White circular sign, red border, depicting two passenger cars side-by-side: a black car on the left and a red car on the right (illustrating an overtaking maneuver in a right-hand-drive traffic system).
Statutory Mandate: Section 58 of the National Road Traffic Act makes obedience to the sign compulsory. The Department of Transport's learner manual states the purpose of R214 plainly: it informs drivers that overtaking is prohibited for the next 500 metres .
Applicability: Applies universally to motorcycles, passenger sedans, minibuses, buses, and heavy commercial trucks.
Duration of Prohibition: The overtaking ban remains in effect from the point where the sign is displayed until:
- The 500-metre span stated in the official manual has elapsed, or a de-restriction sign (R600) is encountered;
- The roadway reaches an intersection or junction where a change of alignment occurs; or
Painted road markings (such as the resumption of a broken dividing line RM2) legally supersede the restriction.
The Stationary Hazard Exception
A critical legal and practical question frequently arises: Is a driver permitted to cross the lane boundary to pass a completely stationary object? Under established South African traffic jurisprudence and K53 testing standards, passing a vehicle that is completely broken down, an immobilized roadworks machine, or a stationary physical obstruction is classified as "passing an obstruction" rather than statutory "overtaking". Drivers may cautiously maneuver around the stationary hazard only after verifying that:
- The opposing lane is completely free of approaching traffic;
- Sufficient clearance exists to clear the obstruction safely; and
The maneuver can be executed without forcing oncoming vehicles to decelerate or swerve.
[!CRITICAL]
Passing a slow-moving agricultural tractor, a cyclist, or a heavy truck crawling up an incline at 10 km/h is STRICTLY PROHIBITED in an R214 zone. If the vehicle ahead is in forward motion—regardless of how slowly it is moving—it is legally defined as a moving vehicle. Overtaking it is an offence under section 58 of the Act.
2. No Overtaking by Goods Vehicles Sign (R215)
Visual Appearance: White circular sign, red border, displaying the black silhouette of a commercial goods truck on the left and a red passenger car on the right.
Statutory Mandate: The official manual gives R215 a narrower meaning than most prep material claims: “If you are driving a heavy motor vehicle, do not overtake another heavy vehicle if sign R215 is displayed.” The prohibition is on a heavy vehicle overtaking another heavy vehicle — the “elephant race” — and, like R214, it runs for the next 500 metres.
Selective Application: Light motor vehicles (passenger cars, motorcycles, and light delivery bakkies under 3 500 kg GVM) are not addressed by Sign R215 at all. A passenger car may legally overtake a slower vehicle in an R215 zone, and a heavy vehicle may still overtake a light vehicle there, provided in each case that the painted road markings and Regulation 298 permit the manoeuvre. Where the road authority wants to stop all overtaking, it posts R214 instead.
Engineering Rationale Behind Sign R215: "Elephant Racing"
On two-lane highways and multi-lane freeways with moderate inclines, commercial trucks frequently attempt to overtake one another with marginal speed differentials:
Acceleration Deficit: A loaded 16-tonne rigid truck traveling at 82 km/h attempting to pass another truck traveling at 80 km/h requires over 1.2 kilometres of clear road to complete the maneuver.
Hazard Profile: During this prolonged maneuver, the overtaking truck occupies the opposing lane (on two-lane undivided roads) or obstructs high-speed overtaking lanes (on freeways), causing massive following traffic compression, erratic braking waves, and catastrophic head-on risks.
Road authorities deploy Sign R215 on winding corridors (e.g., Van Reenen's Pass on the N3, Hex River Pass on the N1) to eliminate truck-induced lane blockage.
No U-Turn Sign (R213) & Turning Prohibitions
Turning restrictions prevent heavy vehicles from executing movements that exceed their turning capabilities or obstruct major arterial traffic flows. /-------\ /-------\ /-------\
- / RED \ / RED \ / RED \
- | \ /-\ | | \ ^ | | \ | \
- | \ | | | | \ |--- | | \ ---| | |
- \ \| v / \ \ / \ \ /
- \-------/ \-------/ \-------/
- Sign R213 Sign R211 Sign R212
- (No U-Turn) (No Left Turn) (No Right Turn)
- 1. No U-Turn Sign (R213)
Visual Appearance: White circular sign, red border, depicting a black curved 180-degree arrow crossed by a prominent red diagonal slash.
Statutory Meaning: Section 58 of the National Road Traffic Act makes the sign binding: R213 imposes an absolute ban on turning the vehicle around so that it faces the opposite direction on that roadway. Executing a U-turn beyond this sign is a severe moving violation.
Why Heavy Rigid Vehicles Must NEVER Attempt U-Turns
Even on roadways where no R213 sign is present, commercial heavy rigid vehicles should avoid U-turns due to severe physical and mechanical constraints:
Massive Turning Circle: A 10-metre heavy rigid truck requires a kerb-to-kerb turning circle of 18 to 22 metres . A standard two-lane single carriageway is only 7.4 metres wide (3.7 metres per lane). A heavy rigid truck cannot execute a continuous U-turn; it is physically forced to perform a three-point or five-point turn across both traffic lanes.
Total Roadway Blockage: During a multi-point turn, the heavy truck sits perpendicular to oncoming traffic, blocking both lanes simultaneously. At night or in mist, approaching high-speed vehicles cannot see the broadside profile of the unlit truck body in time, causing fatal underride collisions.
Drive Axle Differential & Scrubbing Stress: Executing full steering lock at zero road speed causes extreme tyre scrubbing on rear dual tyres and subjects differential gears to severe torsional strain.
Warning
If a heavy truck driver misses an exit or delivery entrance, they must never attempt a U-turn or multi-point turn on a public road. The driver must continue forward along the primary route until reaching an authorized roundabout, grade-separated interchange, or commercial industrial park where the vehicle can turn safely around a dedicated perimeter loop.
Turning Restrictions: No Left Turn (R211) & No Right Turn (R212)
Turning prohibition signs use directional 90-degree black arrows traversed by a red diagonal slash to forbid specific intersection turning movements.
Sign R211 (No Left Turn): Prohibits all drivers from executing a left turn at the approaching junction.
Sign R212 (No Right Turn): Prohibits all drivers from executing a right turn at the approaching junction.
Heavy Vehicle Swept Path and Tail Swing Hazards
Executing turns at urban intersections is one of the most hazardous tasks for a Code 10 / C1 / C driver. The physical dimensions of rigid trucks create two distinct geometric risks: +-------------------------------------------------------------------------+
- | HEAVY RIGID TRUCK: OFF-TRACKING & TAIL SWING DYNAMICS |
- +-------------------------------------------------------------------------+
- | |
- | <--- FORWARD MOTION <--- |
- | |
- | [ REAR OVERHANG ] [ WHEELBASE ] [ FRONT CAB ] |
- | +-------------------+---------------------+-----------------+ |
- | | | REAR DRIVE AXLE | FRONT STEER | |
- | | | (PIVOT) | AXLE | |
- | +-------------------+---------------------+-----------------+ |
- | |
- | <-----------------> <-----------------> |
- | TAIL SWING SWEPT PATH |
- | When steering sharply right, Front steers right, but |
- | rear overhang swings OUTWARD rear wheels track |
- | to the LEFT (up to 1.2m). INWARD across kerb. |
- | |
- +-------------------------------------------------------------------------+
Low-Speed Off-Tracking (Swept Path): When a heavy vehicle turns, the rear drive axle does not follow the path of the front steering wheels. Instead, the rear wheels cut inward, tracking across a significantly tighter radius. During a sharp left turn, cutting the corner causes the rear dual tyres to mount the pavement kerb, crushing pedestrians, traffic light control boxes, and fire hydrants.
Rear Tail Swing (Rear Overhang Intrusion): Under Regulation 226 of the National Road Traffic Regulations , the statutory maximum rear overhang for a rigid heavy vehicle is 60% of the wheelbase (measured from the centre line of the rear axle to the rearmost point of the vehicle). When a driver steers sharply in one direction, the long rear overhang acts as a lever arm around the rear axle pivot point, swinging out in the opposite direction by up to 0.8 to 1.2 metres:
When steering sharply right, the rear body swings outward to the left, wiping out cyclists or sideswiping vehicles in the adjacent left lane.
When steering sharply left from a kerbside lane, the tail swings out into the fast lane to the right.
Road authorities install Signs R211 and R212 at intersections where narrow cross-street geometries, traffic island configurations, or multiple tram/bus lanes cannot physically absorb heavy vehicle swept path or tail swing intrusion.
Managing Following Traffic Queues in Heavy Vehicles
Because heavy rigid trucks accelerate slowly and are legally barred from overtaking on many two-lane regional roads (under Signs R214 and R215), long queues of impatient passenger cars frequently accumulate behind them.
Professional Protocol for Queue Relief (Regulation 298A)
Do Not Encourage Illegal Overtaking: Truck drivers must never flash their right indicator to "wave" following drivers past. If the following driver trusts the signal and collides head-on with an oncoming car, the truck driver can be held civilly liable and criminally prosecuted for culpable homicide.
Emergency Shoulder Usage (Yellow Lane Rule): Under Regulation 298A , a driver may drive on the paved emergency shoulder on the left of the yellow line (Marking RM4.1) to allow other vehicles to pass ONLY under strict conditions:
- It is daytime (between sunrise and sunset);
- The roadway is a single-carriageway with one lane in each direction;
- Visibility is clear for at least 150 metres ahead;
- The shoulder is completely free of pedestrians, cyclists, or parked vehicles; and
It can be done safely without kicking up stones or dust.
Caution
Moving into the yellow shoulder at night, in fog, or on blind rises is STRICTLY ILLEGAL . A stationary pedestrian or broken-down car on the shoulder is invisible until it is too late to stop.
Summary Matrix: Movement Prohibition Signs
Sign Code Visual Appearance Official Name Mandatory Legal Restriction Heavy Vehicle Operational Impact
R211 White circle, red border, left arrow with red slash No Left Turn Absolute ban on turning left at upcoming junction Plan route ahead; avoid tight intersections
R212 White circle, red border, right arrow with red slash No Right Turn Absolute ban on turning right at upcoming junction Proceed straight to designated arterial turn bay
R213 White circle, red border, 180° arrow with red slash No U-Turn Absolute ban on reversing direction of travel Reversing multi-point turn creates fatal broadside risk
R214 White circle, red border, black & red car Overtaking prohibited Bars ALL vehicles from overtaking moving traffic for the next 500 m Moving vehicles (even crawling tractors) cannot be passed
R215 White circle, red border, truck & red car Overtaking prohibited (heavy vehicles) Bars a heavy motor vehicle from overtaking another heavy vehicle for the next 500 m Passenger cars may pass; heavy trucks must remain in lane
Common DLTC Exam Traps & Pitfalls
Trap 1: The "Slow Tractor" Myth. Candidates believe that a tractor or bicycle traveling at 10 km/h in an R214 zone may be overtaken. This is an immediate test failure: if it is moving forward, overtaking is illegal.
Trap 2: Empty Goods Truck in Sign R215 Zone. Candidates assume that an unladen delivery truck may overtake past Sign R215. The ban applies to the statutory goods vehicle classification exceeding 3 500 kg GVM, not current payload.
Trap 3: Yellow Line Shoulder Driving at Night. Drivers frequently believe that moving left of the yellow line to let cars pass is permitted at night if headlights are on high beam. Regulation 298A strictly limits yellow-line shoulder driving to daylight hours between sunrise and sunset.