Study guide

1.3 Worker Representation: Health & Safety Representatives and Committees

SACPCMP Construction Health & Safety Manager Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South African Occupational Health and Safety Legislation

1.1 The OHS Act Framework, General Duties of Employers and Employees 1.2 Corporate Governance and Section 16 Liability & Delegations 1.3 Worker Representation: Health & Safety Representatives and Committees 1.4 Mandatary Agreements, Acts/Omissions & Criminal Liability

2 Chapter 2: Construction Regulations 2014 & Legal Appointments

2.1 Construction Work Permits, Notifications & Client Duties 2.2 Designer Duties and Principal Contractor Obligations 2.3 Statutory Construction Supervision Appointments 2.4 The CHS Manager vs CHS Officer vs CHS Agent & Professional Registration

3 Chapter 3: Risk Assessment Methodologies & The HIRA Process

3.1 Fundamental Risk Terminology: Hazards, Risks, Consequences & Tolerability 3.2 The Three Tiers of HIRA: Baseline, Issue-Based & Continuous Risk Assessments 3.3 Risk Rating Matrices: Quantitative, Semi-Quantitative & Qualitative Scoring 3.4 Task-Based Risk Assessments (TBRA) & Workforce Participation

4 Chapter 4: Risk Control Hierarchy & Safe Work Procedures

4.1 The Hierarchy of Controls in Construction Operations 4.2 Developing and Implementing Safe Work Procedures (SWPs) and SOPs 4.3 Daily Safety Task Instructions (DSTI) and Pre-Task Risk Reviews

5 Chapter 5: Specifications, Plans & The Health and Safety File

5.1 Client Health and Safety Specifications 5.2 The Principal Contractor Health & Safety Plan: Structure and Approval 5.3 Compiling and Maintaining the Consolidated Health & Safety File 5.4 Subcontractor Safety File Verification and Onboarding

6 Chapter 6: Specialized Safety Plans, Method Statements & Registers

6.1 Comprehensive Fall Protection Planning (CR 10 Requirements) 6.2 Contractor Method Statements and Risk Alignment 6.3 Statutory Registers, Checklists, and Inspection Logs

7 Chapter 7: Working at Heights & Temporary Works

7.1 Working at Heights: Fall Prevention, Fall Arrest & Rescue Systems 7.2 Scaffolding Standards, Competent Inspection & SANS 10085 (CR 16) 7.3 Temporary Works Management: Formwork, Falsework & Support Structures (CR 12)

8 Chapter 8: Excavations, Demolition & Heavy Plant Operations

8.1 Excavation Safety, Shoring, Battering & Underground Services (CR 13) 8.2 Demolition Work, Structural Assessment & Control Zones (CR 14) 8.3 Mobile Plant, Construction Vehicles & Cranes (CR 22, 23)

9 Chapter 9: Electrical Safety, Hazardous Chemicals & Confined Spaces

9.1 Temporary Electrical Installations, Distribution Boards & SANS 10142 (CR 24) 9.2 Hazardous Chemical Agents (HCA) & the Globally Harmonized System (GHS) 9.3 Confined Space Entry, Atmospheric Testing & Emergency Protocols (GSR 5)

10 Chapter 10: Incident Reporting, Statutory Notifications & Investigations

10.1 OHS Act Section 24 Statutory Reporting Criteria and Timeframes 10.2 Compensation for Occupational Injuries and Diseases Act (COIDA) Compliance 10.3 Incident Scene Preservation and Evidence Gathering Protocols 10.4 Root Cause Analysis Methodologies (5 Whys, Fishbone) & CAPA

11 Chapter 11: Safety Auditing, Worker Consultation & Site Training

11.1 Internal Audits, Client Oversight Audits & Scoring Protocols (CR 5(1)(o), CR 7(1)(c)) 11.2 Non-Conformance Reports (NCRs), Corrective Actions & Close-Out Mandatory Site Induction, Competency Verification & Training Programs (CR 7(5)–(7)) 11.4 Medical Surveillance, Certificate of Fitness & Hygiene Monitoring (CR 7(8))

12 Chapter 12: Health and Safety Management Systems, Performance & Culture

12.1 Health and Safety Management Systems & ISO 45001 12.2 Health and Safety Performance Measurement, Statistics & Trend Analysis 12.3 Leadership, People & Health and Safety Culture 12.4 Innovation & Technology in Construction Health and Safety

13 Chapter 13: Emergency Preparedness, Communication & Health and Safety Procurement

13.1 Emergency Preparedness, Fire Precautions & First Aid (CR 29, GSR 3) 13.2 Health and Safety Communication, Consultation, Meetings & Reporting 13.3 Health and Safety Procurement & Cost Management

14 Chapter 14: Physical Agents, Environmental Management & Specialised Site Controls

14.1 Noise, Physical Agents & Ergonomics on Construction Sites 14.2 Environmental Management on Construction Projects 14.3 Specialised Site Controls: Structures, Platforms, Hoists, Plant & Facilities (CR 11, 15, 17-21, 25-28, 30)

1.3 Worker Representation: Health & Safety Representatives and Committees

Key Takeaways Explain This Topic AI

Section 17(1) requires every employer with more than 20 employees at a workplace to designate health and safety representatives in writing for a specified period, after good-faith consultation under Section 17(2).

Section 17(5) sets minimum ratios of one representative per 100 employees or part thereof in shops and offices, and one per 50 or part thereof at all other workplaces, including construction sites.

Section 18 gives representatives inspection, investigation and representation functions and rights, and Section 18(4) protects them from civil liability for failing to do anything they may or must do.

Section 19 requires a committee wherever two or more representatives are designated; it must meet at least once every three months, and employer nominees may not outnumber representatives (Section 19(2)(c)).

Section 20 requires the committee to discuss every incident causing injury, illness or death and to keep records of its recommendations and reports to inspectors.

Last updated: October 2026

1. Statutory Designation of Health and Safety Representatives (Section 17)

Worker representation forms the operational core of the internal responsibility system codified in the OHS Act. Rather than relying solely on external state inspections, the Act mandates that employees participate directly in identifying workplace hazards, evaluating protective measures, and engaging with management.

Section 17(1) establishes the mandatory statutory threshold for designating Health and Safety Representatives:

"Subject to the provisions of subsection (2), every employer who employs more than 20 employees in his employment at any workplace, shall, within four months after the commencement of this Act or after commencing business, or from such time as the number of employees exceeds 20, as the case may be, designate in writing for a specified period health and safety representatives for such workplace, or for different sections thereof."

2. Statutory Ratios and Determination of Representative Numbers

Section 17(5) prescribes the minimum statutory ratios governing representative numbers:

Shops and Offices : At least one health and safety representative for every 100 employees or part thereof (1:100).

All Other Workplaces (Including Construction Sites) : At least one health and safety representative for every 50 employees or part thereof (1:50).

Employees who work somewhere other than where they ordinarily report for duty are counted at the workplace where they report (Section 17(5) proviso), and under Section 17(6) an inspector may direct the employer to designate more representatives, even at a workplace with 20 or fewer employees. In the construction sector, where physical risks are elevated, dynamic site conditions prevail, and transient workforces rotate rapidly, the statutory ratio of 1:50 represents an absolute legal floor rather than an optimal ceiling. On high-risk construction projects, collective agreements and client health and safety specifications frequently mandate higher representation densities, such as 1 representative per 20 or 25 workers across active work fronts (e.g., separate representatives for structural steel, formwork, scaffolding, electrical installations, and wet trades).

3. Consultation and Designation Procedures (Section 17(2)–(4))

An employer cannot unilaterally appoint health and safety representatives. Section 17(2) requires the employer and its employees (or their representatives) to consult in good faith on the arrangements for nomination or election, the period of office and the subsequent designation of representatives. If that consultation fails, the matter is referred to an inspector for arbitration, and the inspector's decision is final (Section 17(3) excludes the Arbitration Act and the labour dispute machinery). In practice the process runs as follows:

Consultation with Recognized Representatives : The employer must consult in good faith with recognized employee organizations, registered trade unions, or workplace employee forums regarding the nomination and election process.

Election by Peers : Employees employed in a specific workplace or section must nominate and elect their peers to represent them.

Eligibility Requirements (Section 17(4)) : Only employees employed in a full-time capacity at the specific workplace who are acquainted with conditions and activities at that workplace or section are eligible.

Written Designation : Following election, the employer formally designates the representative in writing. The appointment letter must specify the designated work section, the date of commencement, and the term of office (typically 1 to 3 years).

4. Functions and Statutory Rights of Health & Safety Representatives (Section 18)

Section 18(1) enumerates the extensive functions and investigative powers of designated representatives:

Review Effectiveness of Measures : Review the effectiveness of health and safety measures implemented by the employer (Section 18(1)(a)).

Identify Potential Hazards : Identify potential hazards and potential major incidents at the workplace (Section 18(1)(b)).

Examine Incident Causes : Examine the causes of incidents in collaboration with the employer, participate in incident investigations, and examine incident registers (Section 18(1)(c)).

Investigate Employee Complaints : Investigate complaints by any employee relating to that employee's health or safety at work (Section 18(1)(d)).

Make Formal Representations : Make representations to the employer or an inspector on general matters affecting the health or safety of employees, or on specific incident findings (Section 18(1)(e) & (f)).

Workplace Inspections : Inspect the workplace, including plant, machinery, and health and safety equipment, at agreed intervals after giving reasonable notice to the employer (Section 18(1)(g)).

Work with Inspectors : Participate in consultations with inspectors at the workplace, accompany inspectors on inspections, and receive information from inspectors (Section 18(1)(h) & (i)).

Additional Rights (Section 18(2)) : Visit the site of an incident and attend any inspection in loco; attend any investigation or formal inquiry held under the Act; inspect documents the employer must keep; accompany an inspector; be accompanied by a technical adviser with the employer's approval (which may not be unreasonably withheld); and participate in any internal health or safety audit.

Attend Committee Meetings : Attend all meetings of the Health and Safety Committee established for that workplace (Section 18(1)(j)).

5. Statutory Immunity of Health and Safety Representatives (Section 18(4))

A critical protective shield is codified in Section 18(4):

"A health and safety representative shall not incur any civil liability by reason of the fact only that he failed to do anything which he may do or is required to do in terms of this Act."

Health and safety representatives perform statutory functions to facilitate workplace safety. They do not assume managerial liability. If an undetected hazard leads to an accident, the representative incurs no civil liability merely because they failed to identify or report it, and the primary legal duty to maintain a safe working environment remains with the employer under Section 8. Section 26 separately protects employees against victimisation for doing what the Act requires or permits them to do.

Under Section 17(7), all activities connected with the designation, functions and training of representatives take place during ordinary working hours and count as time spent working, and Section 18(3) requires the employer to provide the facilities, assistance and training that representatives reasonably require.

6. Health and Safety Committees: Statutory Mandate and Composition (Section 19)

Section 19 governs the establishment of the collective governance body:

"(1) An employer shall in respect of each workplace where two or more health and safety representatives have been designated, establish one or more health and safety committees..."

If a construction site employs more than 20 workers and requires at least two representatives (e.g., 51 or more employees on site, or multiple designated sections), the establishment of a Health and Safety Committee is mandatory.

Section 19(2) and (3) govern committee composition with strict statutory constraints:

Mandatory Member Inclusion : All designated health and safety representatives for that workplace must be members of the committee.

Employer Representatives (Section 19(3)) : Persons nominated by the employer must be designated in writing for a period the employer determines.

The Parity Rule (Section 19(2)(c)) : The number of persons nominated by the employer on a health and safety committee shall not exceed the number of health and safety representatives on that committee.

Advisory Members (Section 19(6)) : The committee may co-opt advisers with particular knowledge, but they may not vote.

This statutory ceiling prevents management from stacking the committee with project managers, quantity surveyors, and foremen to outvote or marginalize worker representatives. Worker representatives must maintain equal or majority standing.

7. Meeting Frequency and Committee Functions (Sections 19(4) & 20)

Meeting Frequency (Section 19(4)) : The committee shall hold meetings as often as may be necessary, but at least once every three months . An inspector may direct a meeting, including where more than 10% of employees at the workplace have asked the inspector in writing. In the dynamic, fast-moving construction industry, quarterly meetings are wholly inadequate to manage evolving structural and excavation risks. Industry standard best practice—and mandatory client specification on all major projects—dictates monthly health and safety committee meetings.

Committee Functions (Section 20(1)) :

May make recommendations to the employer (or, where that fails to resolve the matter, to an inspector) on any matter affecting health or safety at the workplace;

Must discuss every incident in which any person was injured, became ill or died, and may report on it in writing to an inspector; it also considers the incident records kept under General Administrative Regulation 9 at its next meeting;

Performs any other prescribed functions.

Recordkeeping Mandate (Section 20(2)) : The committee must keep a record of every recommendation made to the employer and of any report made to an inspector; the General Administrative Regulations require these records to be kept for at least three years . Under Section 20(3), the committee and its members incur no civil liability merely for failing to do something they may or must do.

8. Structural Comparison: Representatives vs Committees

Governance Feature Health & Safety Representatives (Sec 17 & 18) Health & Safety Committees (Sec 19 & 20)

Mandatory Threshold More than 20 employees at any workplace Workplace where 2 or more representatives are designated

Statutory Ratios 1:100 (shops/offices); 1:50 (all other workplaces) — Section 17(5) All reps + employer nominees (nominees ≤ reps) — Section 19(2)(c)

Legal Form Individual written statutory designation Collective bipartite statutory consultative committee

Primary Function Inspect work areas, investigate complaints, examine incidents Deliberate policy, review incidents, formulate formal recommendations

Statutory Liability No civil liability for omissions under Section 18(4) No civil liability for omissions under Section 20(3); advisory status

Meeting Frequency Continuous operational inspection and reporting At least once every 3 months; monthly construction best practice

Record Retention Inspection checklists maintained in Site Safety File Minutes and recommendations retained for at least 3 years

9. Construction Health and Safety Manager Operational Oversight

The registered Construction Health and Safety Manager (CHSM) serves as the executive coordinator between worker representatives, the Health and Safety Committee, and the Construction Manager (CR 8(1)). The CHSM must establish a formal calendar of monthly committee meetings, compile incident analysis dossiers for committee deliberation, ensure management provides written responses to committee recommendations within 14 days, and verify that all representatives receive accredited hazard identification and risk assessment training.

Loading diagram... Worker Representation and Committee Governance Framework