Study guide

12.1 Health and Safety Management Systems & ISO 45001

SACPCMP Construction Health & Safety Manager Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South African Occupational Health and Safety Legislation

1.1 The OHS Act Framework, General Duties of Employers and Employees 1.2 Corporate Governance and Section 16 Liability & Delegations 1.3 Worker Representation: Health & Safety Representatives and Committees 1.4 Mandatary Agreements, Acts/Omissions & Criminal Liability

2 Chapter 2: Construction Regulations 2014 & Legal Appointments

2.1 Construction Work Permits, Notifications & Client Duties 2.2 Designer Duties and Principal Contractor Obligations 2.3 Statutory Construction Supervision Appointments 2.4 The CHS Manager vs CHS Officer vs CHS Agent & Professional Registration

3 Chapter 3: Risk Assessment Methodologies & The HIRA Process

3.1 Fundamental Risk Terminology: Hazards, Risks, Consequences & Tolerability 3.2 The Three Tiers of HIRA: Baseline, Issue-Based & Continuous Risk Assessments 3.3 Risk Rating Matrices: Quantitative, Semi-Quantitative & Qualitative Scoring 3.4 Task-Based Risk Assessments (TBRA) & Workforce Participation

4 Chapter 4: Risk Control Hierarchy & Safe Work Procedures

4.1 The Hierarchy of Controls in Construction Operations 4.2 Developing and Implementing Safe Work Procedures (SWPs) and SOPs 4.3 Daily Safety Task Instructions (DSTI) and Pre-Task Risk Reviews

5 Chapter 5: Specifications, Plans & The Health and Safety File

5.1 Client Health and Safety Specifications 5.2 The Principal Contractor Health & Safety Plan: Structure and Approval 5.3 Compiling and Maintaining the Consolidated Health & Safety File 5.4 Subcontractor Safety File Verification and Onboarding

6 Chapter 6: Specialized Safety Plans, Method Statements & Registers

6.1 Comprehensive Fall Protection Planning (CR 10 Requirements) 6.2 Contractor Method Statements and Risk Alignment 6.3 Statutory Registers, Checklists, and Inspection Logs

7 Chapter 7: Working at Heights & Temporary Works

7.1 Working at Heights: Fall Prevention, Fall Arrest & Rescue Systems 7.2 Scaffolding Standards, Competent Inspection & SANS 10085 (CR 16) 7.3 Temporary Works Management: Formwork, Falsework & Support Structures (CR 12)

8 Chapter 8: Excavations, Demolition & Heavy Plant Operations

8.1 Excavation Safety, Shoring, Battering & Underground Services (CR 13) 8.2 Demolition Work, Structural Assessment & Control Zones (CR 14) 8.3 Mobile Plant, Construction Vehicles & Cranes (CR 22, 23)

9 Chapter 9: Electrical Safety, Hazardous Chemicals & Confined Spaces

9.1 Temporary Electrical Installations, Distribution Boards & SANS 10142 (CR 24) 9.2 Hazardous Chemical Agents (HCA) & the Globally Harmonized System (GHS) 9.3 Confined Space Entry, Atmospheric Testing & Emergency Protocols (GSR 5)

10 Chapter 10: Incident Reporting, Statutory Notifications & Investigations

10.1 OHS Act Section 24 Statutory Reporting Criteria and Timeframes 10.2 Compensation for Occupational Injuries and Diseases Act (COIDA) Compliance 10.3 Incident Scene Preservation and Evidence Gathering Protocols 10.4 Root Cause Analysis Methodologies (5 Whys, Fishbone) & CAPA

11 Chapter 11: Safety Auditing, Worker Consultation & Site Training

11.1 Internal Audits, Client Oversight Audits & Scoring Protocols (CR 5(1)(o), CR 7(1)(c)) 11.2 Non-Conformance Reports (NCRs), Corrective Actions & Close-Out Mandatory Site Induction, Competency Verification & Training Programs (CR 7(5)–(7)) 11.4 Medical Surveillance, Certificate of Fitness & Hygiene Monitoring (CR 7(8))

12 Chapter 12: Health and Safety Management Systems, Performance & Culture

12.1 Health and Safety Management Systems & ISO 45001 12.2 Health and Safety Performance Measurement, Statistics & Trend Analysis 12.3 Leadership, People & Health and Safety Culture 12.4 Innovation & Technology in Construction Health and Safety

13 Chapter 13: Emergency Preparedness, Communication & Health and Safety Procurement

13.1 Emergency Preparedness, Fire Precautions & First Aid (CR 29, GSR 3) 13.2 Health and Safety Communication, Consultation, Meetings & Reporting 13.3 Health and Safety Procurement & Cost Management

14 Chapter 14: Physical Agents, Environmental Management & Specialised Site Controls

14.1 Noise, Physical Agents & Ergonomics on Construction Sites 14.2 Environmental Management on Construction Projects 14.3 Specialised Site Controls: Structures, Platforms, Hoists, Plant & Facilities (CR 11, 15, 17-21, 25-28, 30)

12.1 Health and Safety Management Systems & ISO 45001

Key Takeaways Explain This Topic AI

A health and safety management system is the organised set of policies, processes and records that turns legal duties into routine practice; GN 1181 of 2019 describes the CHSM as managing the planning and implementation of construction health and safety systems.

ISO 45001:2018 follows the Plan-Do-Check-Act cycle through clauses 4 to 10: context, leadership and worker participation, planning, support, operation, performance evaluation and improvement.

ISO 45001 certification is voluntary; it never replaces the OHS Act or the Construction Regulations, and an inspector judges compliance with the law, not with the certificate.

ISO 45001 is under revision: the draft international standard ballot closed on 9 August 2026 and a new edition is expected in 2027, so ISO 45001:2018 with its 2024 climate change amendment remains current.

On a project, the corporate system feeds the client's specification (CR 5(1)(b)), the principal contractor's plan (CR 7(1)(a)) and each contractor's plan (CR 7(2)(a)), which is where its controls become site-specific.

Last updated: October 2026

1. What a Management System Is and Why the CHSM Needs One

The OHS Act and the Construction Regulations tell employers what must be achieved: risk assessments, safe work procedures, appointments, inspections, audits, training and records. A health and safety management system (HSMS) is how an organisation achieves those duties consistently on every project, rather than relying on individual effort. It is the organised set of policy, responsibilities, procedures, resources and records that makes safe work routine.

The SACPCMP Scope of Services (GN 1181 of 2019) describes the Construction Health and Safety Manager as a competent person "appointed by an employer to manage the planning and implementation of construction health and safety systems" . Managing systems, not only inspecting sites, is therefore a defining part of the CHSM role and a core knowledge area in the SACPCMP registration rules.

A good system answers five practical questions:

What must we comply with? A legal register listing the Act, the Construction Regulations, the General Safety, Driven Machinery, Electrical Installation, HCA, Noise Exposure and Physical Agents Regulations, and client requirements.

Who is responsible? Section 16 accountability, CR 8 appointments and written job descriptions.

How is risk controlled? CR 9 risk assessments, safe work procedures, permits and inspections.

How do we know it works? Inspections, audits under CR 5(1)(o) and CR 7(1)(c)(vii), incident data and leading indicators.

How do we improve? Investigations, corrective actions and management review.

2. The Plan-Do-Check-Act Cycle

Most management system standards use the Plan-Do-Check-Act (PDCA) cycle:

Plan : understand the organisation and its legal duties, set the policy and objectives, identify hazards and assess risks, and plan the controls.

Do : provide resources, competence, communication and documented information, and run the operational controls (safe work procedures, permits, contractor management, emergency arrangements).

Check : monitor and measure performance, evaluate legal compliance, audit, and investigate incidents.

Act : correct nonconformities, review the system at management level and improve it.

On a construction project the cycle runs at several speeds: daily (task instructions and pre-use checks), monthly (the 30-day audit cycle of CR 5(1)(o) and CR 7(1)(c)(vii)) and annually (corporate management review).

3. ISO 45001 Clause Structure with Construction Examples

ISO 45001:2018 , Occupational health and safety management systems — Requirements with guidance for use , is the international standard for an HSMS. It replaced OHSAS 18001, whose certificates lapsed when the migration period ended in 2021. South Africa adopted it as SANS 45001 .

Clause Requirement Construction example

4 Context Internal and external issues, needs of workers and other interested parties, scope of the system Client, community, unions, inspectors; which divisions and sites the system covers

5 Leadership and worker participation Top management commitment, OH&S policy, roles and authorities, consultation and participation of workers (5.4) Section 16 accountability; policy signed by the CEO; health and safety representatives and committees under sections 17 to 20

6 Planning Hazard identification, risk and opportunity assessment, legal requirements, objectives Baseline, issue-based and task-based risk assessments; legal register; targets such as inspection completion

7 Support Resources, competence, awareness, communication, documented information Training matrix, inductions under CR 7(5), document control of the health and safety file

8 Operation Operational planning and control, the hierarchy of controls (8.1.2) , management of change, procurement and contractors, emergency preparedness Method statements, permits, contractor appointment under CR 7(1)(c), emergency plans

9 Performance evaluation Monitoring and measurement, evaluation of compliance, internal audit (9.2) , management review (9.3) Inspection registers, 30-day audits, monthly statistics, executive review

10 Improvement Incidents, nonconformities and corrective action, continual improvement Section 24 reporting, GAR 9 investigations, NCR close-out

Clause 8.1.2 sets the same order of controls taught throughout this guide: eliminate the hazard, substitute less hazardous processes or materials, use engineering controls and reorganise work, apply administrative controls including training, and use personal protective equipment.

4. Current Status of the Standard

The current edition is ISO 45001:2018 , together with Amendment 1:2024 , which requires organisations to consider whether climate change is a relevant issue in their context. ISO is revising the standard: the draft international standard (DIS) ballot closed on 9 August 2026 , and a new edition is expected in 2027 , followed by a transition period for certified organisations. Until the new edition is published, certification audits use the 2018 edition. A CHSM should track the revision but must not describe draft clauses as requirements.

5. Certification Is Voluntary; the Law Is Not

ISO 45001 certification is a voluntary third-party attestation that a system meets the standard. A client may require it in tender documents, and it is useful evidence of competence and resources under CR 5(1)(h) and CR 7(1)(c)(iii). It is not a legal requirement of the OHS Act or the Construction Regulations, and it never replaces them:

An inspector judges whether the Act and regulations are complied with on site, and can issue contravention or prohibition notices to a certified contractor.

A certificate does not prove that a particular excavation is shored or a particular scaffold is safe; it proves that a system existed when the certification body sampled it.

Many smaller contractors have no certification but can still operate a lawful and effective system.

6. From Corporate System to Project Plans

A contractor's corporate system is generic. On a project it must be translated into site-specific documents:

The client's health and safety specification (CR 5(1)(b)), based on the client's baseline risk assessment;

The principal contractor's health and safety plan (CR 7(1)(a)), based on that specification and approved by the client under CR 5(1)(l);

Each contractor's health and safety plan (CR 7(2)(a)), approved by the principal contractor; and

The health and safety file (CR 7(1)(b)), which holds the records that show the system is working.

The CHSM checks that the corporate procedures actually appear in these plans: that the project's risk assessments use the corporate method, that site inspections follow the corporate checklists, and that site findings flow back into corporate management review.

7. Integrated Management Systems

Many contractors combine quality (ISO 9001), environmental (ISO 14001) and health and safety (ISO 45001) systems into one integrated management system , because the standards share the same high-level clause structure. Integration reduces duplicated procedures and audits, but the CHSM must make sure that health and safety requirements, especially worker consultation and the hierarchy of controls, are not diluted by a quality-led format.

Loading diagram... PDCA Cycle Linking ISO 45001 to Construction Duties