Study guide
12.3 Leadership, People & Health and Safety Culture
SACPCMP Construction Health & Safety Manager Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: South African Occupational Health and Safety Legislation
1.1 The OHS Act Framework, General Duties of Employers and Employees 1.2 Corporate Governance and Section 16 Liability & Delegations 1.3 Worker Representation: Health & Safety Representatives and Committees 1.4 Mandatary Agreements, Acts/Omissions & Criminal Liability
2 Chapter 2: Construction Regulations 2014 & Legal Appointments
2.1 Construction Work Permits, Notifications & Client Duties 2.2 Designer Duties and Principal Contractor Obligations 2.3 Statutory Construction Supervision Appointments 2.4 The CHS Manager vs CHS Officer vs CHS Agent & Professional Registration
3 Chapter 3: Risk Assessment Methodologies & The HIRA Process
3.1 Fundamental Risk Terminology: Hazards, Risks, Consequences & Tolerability 3.2 The Three Tiers of HIRA: Baseline, Issue-Based & Continuous Risk Assessments 3.3 Risk Rating Matrices: Quantitative, Semi-Quantitative & Qualitative Scoring 3.4 Task-Based Risk Assessments (TBRA) & Workforce Participation
4 Chapter 4: Risk Control Hierarchy & Safe Work Procedures
4.1 The Hierarchy of Controls in Construction Operations 4.2 Developing and Implementing Safe Work Procedures (SWPs) and SOPs 4.3 Daily Safety Task Instructions (DSTI) and Pre-Task Risk Reviews
5 Chapter 5: Specifications, Plans & The Health and Safety File
5.1 Client Health and Safety Specifications 5.2 The Principal Contractor Health & Safety Plan: Structure and Approval 5.3 Compiling and Maintaining the Consolidated Health & Safety File 5.4 Subcontractor Safety File Verification and Onboarding
6 Chapter 6: Specialized Safety Plans, Method Statements & Registers
6.1 Comprehensive Fall Protection Planning (CR 10 Requirements) 6.2 Contractor Method Statements and Risk Alignment 6.3 Statutory Registers, Checklists, and Inspection Logs
7 Chapter 7: Working at Heights & Temporary Works
7.1 Working at Heights: Fall Prevention, Fall Arrest & Rescue Systems 7.2 Scaffolding Standards, Competent Inspection & SANS 10085 (CR 16) 7.3 Temporary Works Management: Formwork, Falsework & Support Structures (CR 12)
8 Chapter 8: Excavations, Demolition & Heavy Plant Operations
8.1 Excavation Safety, Shoring, Battering & Underground Services (CR 13) 8.2 Demolition Work, Structural Assessment & Control Zones (CR 14) 8.3 Mobile Plant, Construction Vehicles & Cranes (CR 22, 23)
9 Chapter 9: Electrical Safety, Hazardous Chemicals & Confined Spaces
9.1 Temporary Electrical Installations, Distribution Boards & SANS 10142 (CR 24) 9.2 Hazardous Chemical Agents (HCA) & the Globally Harmonized System (GHS) 9.3 Confined Space Entry, Atmospheric Testing & Emergency Protocols (GSR 5)
10 Chapter 10: Incident Reporting, Statutory Notifications & Investigations
10.1 OHS Act Section 24 Statutory Reporting Criteria and Timeframes 10.2 Compensation for Occupational Injuries and Diseases Act (COIDA) Compliance 10.3 Incident Scene Preservation and Evidence Gathering Protocols 10.4 Root Cause Analysis Methodologies (5 Whys, Fishbone) & CAPA
11 Chapter 11: Safety Auditing, Worker Consultation & Site Training
11.1 Internal Audits, Client Oversight Audits & Scoring Protocols (CR 5(1)(o), CR 7(1)(c)) 11.2 Non-Conformance Reports (NCRs), Corrective Actions & Close-Out Mandatory Site Induction, Competency Verification & Training Programs (CR 7(5)–(7)) 11.4 Medical Surveillance, Certificate of Fitness & Hygiene Monitoring (CR 7(8))
12 Chapter 12: Health and Safety Management Systems, Performance & Culture
12.1 Health and Safety Management Systems & ISO 45001 12.2 Health and Safety Performance Measurement, Statistics & Trend Analysis 12.3 Leadership, People & Health and Safety Culture 12.4 Innovation & Technology in Construction Health and Safety
13 Chapter 13: Emergency Preparedness, Communication & Health and Safety Procurement
13.1 Emergency Preparedness, Fire Precautions & First Aid (CR 29, GSR 3) 13.2 Health and Safety Communication, Consultation, Meetings & Reporting 13.3 Health and Safety Procurement & Cost Management
14 Chapter 14: Physical Agents, Environmental Management & Specialised Site Controls
14.1 Noise, Physical Agents & Ergonomics on Construction Sites 14.2 Environmental Management on Construction Projects 14.3 Specialised Site Controls: Structures, Platforms, Hoists, Plant & Facilities (CR 11, 15, 17-21, 25-28, 30)
12.3 Leadership, People & Health and Safety Culture
Key Takeaways Explain This Topic AI
Leadership accountability is legal as well as cultural: section 16 makes the chief executive officer responsible for the employer's duties, and section 8(2)(i) requires the employer to enforce health and safety measures.
Culture models such as Hudson's ladder (pathological to generative) and the Bradley curve (reactive to interdependent) help diagnose how an organisation thinks about safety, but they are diagnostic tools, not legal standards.
A just culture separates honest error, at-risk behaviour and reckless conduct, so people report mistakes while deliberate violations still lead to fair discipline.
Section 26 of the OHS Act forbids dismissing or disadvantaging an employee for giving information to an inspector, complying with an inspector's lawful direction, doing anything the Act permits or requires, or refusing to do something the Act prohibits.
Behaviour-based safety works only alongside engineering and management controls; blaming workers for unsafe acts without fixing the conditions that produce them repeats incidents.
Last updated: October 2026
1. Why People and Culture Are a Core Knowledge Area
The SACPCMP lists "People and Health and Safety Culture" as a core knowledge area for health and safety registration. Construction sites change daily, rely on many subcontractors and use a transient workforce, so written systems only work when supervisors and workers believe in them and act on them. The CHSM influences culture through leadership, communication, fair treatment and visible follow-through.
2. The Legal Basis for Leadership and Participation
Culture in South Africa rests on clear legal duties:
Section 16 makes the chief executive officer responsible for ensuring that the employer's duties are properly discharged; delegating tasks under section 16(2) does not remove that responsibility.
Section 8(2)(i) requires the employer to enforce the measures necessary for health and safety, and section 8(2)(e) requires the information, instructions, training and supervision necessary for safe work.
Section 14 requires every employee to take reasonable care, co-operate, obey lawful health and safety rules, and report unsafe situations and incidents.
Sections 17 to 20 give workers a formal voice through health and safety representatives and committees.
CR 8 places named construction managers and supervisors in the line of accountability for site work.
Leadership commitment is therefore not optional. When a director says "safety first" but rewards only programme and cost, workers notice the gap between words and actions.
3. Models of Safety Culture
Several models help the CHSM describe where an organisation stands:
Hudson's safety culture ladder (Patrick Hudson, building on Ron Westrum's work) has five levels:
Pathological : "Who cares, as long as we're not caught?"
Reactive : safety matters after every incident.
Calculative : systems and statistics are in place, but driven by management.
Proactive : the workforce helps find and fix problems before incidents.
Generative : safety is how the business works, and bad news is welcomed.
The Bradley curve (developed at DuPont) describes four stages: reactive (natural instinct), dependent (supervision and rules), independent (personal commitment) and interdependent (team members look out for each other).
These models are diagnostic tools. They help the CHSM decide on the next step, for example moving a calculative contractor towards worker involvement, but they are not legal standards and do not replace compliance.
4. Human Error and Just Culture
James Reason's work on human error distinguishes:
Errors : slips and lapses (doing the wrong thing by accident or forgetting a step) and mistakes (a wrong plan or judgement);
Violations : deliberate departures from rules, which may be routine ("everyone does it to save time"), situational (the right equipment is not available) or exceptional.
A just culture responds differently to each:
Honest error in a well-designed system: console and learn, and redesign the task to make the error harder.
At-risk behaviour , where a person drifts from the rule because the risk seems low or the system encourages shortcuts: coach the person and fix the system pressures, such as unrealistic programmes or missing equipment.
Reckless conduct , a conscious disregard of a substantial and unjustifiable risk: take fair disciplinary action.
Just culture encourages reporting of near misses and mistakes, which is the information needed to prevent serious incidents.
5. Behaviour-Based Safety and Its Limits
Behaviour-based safety (BBS) programmes use the ABC model : Antecedents (triggers such as instructions or missing equipment), Behaviour , and Consequences (what happens afterwards). Peer observations and feedback can strengthen safe habits. However:
BBS must not shift responsibility from the employer to workers; the employer's duties under section 8 remain.
Unsafe behaviour usually reflects the conditions created by management, such as time pressure, poor planning, missing equipment or inadequate supervision.
Higher-order controls (elimination, substitution and engineering) remain more reliable than relying on behaviour.
6. Protection Against Victimisation and Fair Discipline
Section 26 of the OHS Act forbids an employer to dismiss an employee, reduce their pay, worsen their conditions or disadvantage them because the employee gave information to an inspector or other person administering the Act, complied with an inspector's lawful direction, gave evidence in court, did anything the Act permits or requires, or refused to do something the Act prohibits. Workers who raise concerns, report incidents or co-operate with an inspection are protected.
Discipline for health and safety breaches must follow the Labour Relations Act, 1995 and its Code of Good Practice on dismissal: the rule must exist and be known, the employee must be given a fair hearing, and the sanction must be consistent and proportionate. Inconsistent discipline, such as dismissing a worker for not wearing a harness while ignoring the supervisor who sent them to work without anchor points, damages trust and may be unfair.
7. Practical Leadership Tools
The CHSM can strengthen culture with tools such as:
Visible felt leadership : directors and managers walk the site, talk to workers about specific hazards, listen, and close out what they promised.
Stop-work authority : a written site rule that any worker may stop a task they believe is unsafe without penalty, supported by section 26 protection and by CR 5(1)(q) and CR 7(1)(c)(viii) stop-work duties.
Recognition : praise good hazard reports and safe practice, not only injury-free periods.
Involving workers : include representatives in risk assessments, inspections and investigations.
Supervisor development : supervisors set the daily tone; train them in task risk assessment, communication and fair correction.
Culture surveys and perception interviews : anonymous surveys and structured interviews show whether management and workers see safety the same way.
8. Measuring Cultural Change
Culture changes slowly. Useful signals include more near-miss and hazard reports, faster close-out of worker concerns, active participation in committees, consistent discipline, and workers stopping unsafe work. A falling injury rate alone does not prove that culture has improved.