Study guide

13.2 Health and Safety Communication, Consultation, Meetings & Reporting

SACPCMP Construction Health & Safety Manager Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South African Occupational Health and Safety Legislation

1.1 The OHS Act Framework, General Duties of Employers and Employees 1.2 Corporate Governance and Section 16 Liability & Delegations 1.3 Worker Representation: Health & Safety Representatives and Committees 1.4 Mandatary Agreements, Acts/Omissions & Criminal Liability

2 Chapter 2: Construction Regulations 2014 & Legal Appointments

2.1 Construction Work Permits, Notifications & Client Duties 2.2 Designer Duties and Principal Contractor Obligations 2.3 Statutory Construction Supervision Appointments 2.4 The CHS Manager vs CHS Officer vs CHS Agent & Professional Registration

3 Chapter 3: Risk Assessment Methodologies & The HIRA Process

3.1 Fundamental Risk Terminology: Hazards, Risks, Consequences & Tolerability 3.2 The Three Tiers of HIRA: Baseline, Issue-Based & Continuous Risk Assessments 3.3 Risk Rating Matrices: Quantitative, Semi-Quantitative & Qualitative Scoring 3.4 Task-Based Risk Assessments (TBRA) & Workforce Participation

4 Chapter 4: Risk Control Hierarchy & Safe Work Procedures

4.1 The Hierarchy of Controls in Construction Operations 4.2 Developing and Implementing Safe Work Procedures (SWPs) and SOPs 4.3 Daily Safety Task Instructions (DSTI) and Pre-Task Risk Reviews

5 Chapter 5: Specifications, Plans & The Health and Safety File

5.1 Client Health and Safety Specifications 5.2 The Principal Contractor Health & Safety Plan: Structure and Approval 5.3 Compiling and Maintaining the Consolidated Health & Safety File 5.4 Subcontractor Safety File Verification and Onboarding

6 Chapter 6: Specialized Safety Plans, Method Statements & Registers

6.1 Comprehensive Fall Protection Planning (CR 10 Requirements) 6.2 Contractor Method Statements and Risk Alignment 6.3 Statutory Registers, Checklists, and Inspection Logs

7 Chapter 7: Working at Heights & Temporary Works

7.1 Working at Heights: Fall Prevention, Fall Arrest & Rescue Systems 7.2 Scaffolding Standards, Competent Inspection & SANS 10085 (CR 16) 7.3 Temporary Works Management: Formwork, Falsework & Support Structures (CR 12)

8 Chapter 8: Excavations, Demolition & Heavy Plant Operations

8.1 Excavation Safety, Shoring, Battering & Underground Services (CR 13) 8.2 Demolition Work, Structural Assessment & Control Zones (CR 14) 8.3 Mobile Plant, Construction Vehicles & Cranes (CR 22, 23)

9 Chapter 9: Electrical Safety, Hazardous Chemicals & Confined Spaces

9.1 Temporary Electrical Installations, Distribution Boards & SANS 10142 (CR 24) 9.2 Hazardous Chemical Agents (HCA) & the Globally Harmonized System (GHS) 9.3 Confined Space Entry, Atmospheric Testing & Emergency Protocols (GSR 5)

10 Chapter 10: Incident Reporting, Statutory Notifications & Investigations

10.1 OHS Act Section 24 Statutory Reporting Criteria and Timeframes 10.2 Compensation for Occupational Injuries and Diseases Act (COIDA) Compliance 10.3 Incident Scene Preservation and Evidence Gathering Protocols 10.4 Root Cause Analysis Methodologies (5 Whys, Fishbone) & CAPA

11 Chapter 11: Safety Auditing, Worker Consultation & Site Training

11.1 Internal Audits, Client Oversight Audits & Scoring Protocols (CR 5(1)(o), CR 7(1)(c)) 11.2 Non-Conformance Reports (NCRs), Corrective Actions & Close-Out Mandatory Site Induction, Competency Verification & Training Programs (CR 7(5)–(7)) 11.4 Medical Surveillance, Certificate of Fitness & Hygiene Monitoring (CR 7(8))

12 Chapter 12: Health and Safety Management Systems, Performance & Culture

12.1 Health and Safety Management Systems & ISO 45001 12.2 Health and Safety Performance Measurement, Statistics & Trend Analysis 12.3 Leadership, People & Health and Safety Culture 12.4 Innovation & Technology in Construction Health and Safety

13 Chapter 13: Emergency Preparedness, Communication & Health and Safety Procurement

13.1 Emergency Preparedness, Fire Precautions & First Aid (CR 29, GSR 3) 13.2 Health and Safety Communication, Consultation, Meetings & Reporting 13.3 Health and Safety Procurement & Cost Management

14 Chapter 14: Physical Agents, Environmental Management & Specialised Site Controls

14.1 Noise, Physical Agents & Ergonomics on Construction Sites 14.2 Environmental Management on Construction Projects 14.3 Specialised Site Controls: Structures, Platforms, Hoists, Plant & Facilities (CR 11, 15, 17-21, 25-28, 30)

13.2 Health and Safety Communication, Consultation, Meetings & Reporting

Key Takeaways Explain This Topic AI

Every employer with more than 20 employees at a workplace must designate health and safety representatives in writing (section 17), at a ratio of at least one per 50 employees (one per 100 in shops and offices).

A health and safety committee must meet at least once every three months (section 19(4)), the employer must consult it on health and safety measures, and it must discuss incidents and may report them to an inspector (section 20).

The Construction Regulations create an information chain: the client gives the specification to the designer and tenderers (CR 5(1)(c), (f)), the designer informs the client of known dangers (CR 6), and the principal contractor passes relevant sections to its contractors (CR 7(1)(c)(i)).

CR 9(3) requires employees to be informed, instructed and trained by a competent person on the hazards and related procedures before work starts, and CR 9(5) requires consultation with the committee or representatives on risk assessments.

Communication only works if it is understood: use the workforce's languages, pictures and demonstrations, check understanding, and record what was communicated, to whom and when.

Last updated: October 2026

1. Communication as a Core Knowledge Area

Health and Safety Communication Management is a SACPCMP core knowledge area, and communication, stakeholder management and team building appear throughout the SACPCMP's project and construction management areas. Most serious incidents involve a communication failure: a design hazard not passed on, a change not explained, an instruction not understood, or a warning not heard. The CHSM designs communication channels so that the right information reaches the right people in a form they understand.

2. Statutory Channels in the OHS Act

The Act builds communication and consultation into the workplace:

Section 7 : the chief inspector may direct employers to prepare a written health and safety policy, and the employer must then display it prominently.

Section 8(2)(e) and (j) : employers must provide necessary information, instructions, training and supervision, and must inform employees of the scope of their authority under section 37(1)(b).

Section 13 : employers must inform employees of the hazards of their work, the precautions to be taken, and must inform health and safety representatives of inspections, investigations and formal inquiries.

Section 17 : an employer with more than 20 employees at a workplace must designate health and safety representatives in writing after consultation, at least one for every 50 employees (one for every 100 in shops and offices).

Section 18 : representatives may review the effectiveness of health and safety measures, identify hazards, examine the causes of incidents with the employer, investigate complaints, make representations to the employer and inspectors, and take part in consultations and inspections.

Sections 19 and 20 : where two or more representatives are designated, the employer must establish a health and safety committee and consult it at every meeting. The committee must meet at least once every three months ; an inspector may direct a meeting, including where more than 10% of employees request one. Under section 20 the committee may make recommendations to the employer and inspectors, must discuss incidents in which a person was injured, became ill or died and may report on them to an inspector, and must keep records of its recommendations and reports.

3. Information Duties in the Construction Regulations

The Construction Regulations create a chain of information from the client through the designer to the last subcontractor:

The client gives the health and safety specification to the designer (CR 5(1)(c)) and includes it in the tender documents (CR 5(1)(f)).

The designer informs the client in writing of known or anticipated dangers relating to construction work and makes the relevant information available, and must take the specification into account (CR 6).

The principal contractor gives tendering contractors the relevant sections of the specification (CR 7(1)(c)(i)) and makes information and resources available when the design or construction changes (CR 7(1)(c)(ix)); the client has a similar duty to the principal contractor (CR 5(1)(r)).

The client must make the principal contractor's health and safety plan available on request to an employee, inspector or contractor (CR 5(1)(m)).

Under CR 9(3) , every contractor must ensure that employees under their control are informed, instructed and trained by a competent person on hazards and related work procedures before work starts and at intervals the risk assessment determines; under CR 9(4) the principal contractor must inform contractors of hazards in the risk assessment before work starts; and under CR 9(5) contractors must consult the health and safety committee, or representatives chosen by the employees, on the risk assessments.

Induction before site entry (CR 7(5)) and visitor induction (CR 7(6)) are the first communication every person receives.

4. Site Communication Tools

Induction : site-specific, in understandable languages, with comprehension checks.

Daily safety task instructions (DSTIs) and toolbox talks : short briefings at the work face on today's task, hazards, controls and changes; workers sign after the discussion, not before.

Pre-task risk assessments and permits : the permit is a communication tool between the issuer, the work team and the area owner.

Notice boards : the site's health and safety policy, emergency numbers, names of representatives, first aiders and appointed persons, the construction work permit number and safety alerts.

Signage : standard symbolic safety signs at hazards and exclusion zones.

Safety alerts and lessons learned : brief notices after incidents or near misses, shared across contractors and projects.

Radios and alarms : clear channels for plant, cranes and emergencies.

5. Effective Health and Safety Meetings

Typical meetings on a construction project include the monthly client or agent audit close-out, the principal contractor's health and safety committee, weekly contractor co-ordination meetings, and daily start-of-shift briefings. Good meetings have:

a fixed agenda: previous actions, incidents and investigations, inspection and audit findings, upcoming high-risk work, representatives' concerns, and statistics;

the right people: decision-makers who can allocate resources, health and safety representatives, and contractors whose work is on the agenda;

minutes with action items : each action has an owner and a due date and is reviewed at the next meeting;

records kept in the health and safety file, because section 20 requires the committee to keep records of its recommendations and reports, and inspectors and auditors will ask for them.

6. Monthly Reporting

The CHSM's monthly report to the client and management summarises hours worked, incidents, leading and lagging indicators (Section 12.2), audit results, open NCRs, significant changes, and planned high-risk activities. It should lead to decisions. The client's agent uses it, together with the 30-day audit under CR 5(1)(o), to confirm that the plan is being implemented.

7. Communicating with a Diverse Workforce

South Africa has twelve official languages, and site workforces include migrant workers and people with limited literacy. Good practice includes interpreters or bilingual facilitators, pictures and demonstrations, short messages repeated at the work face, and checking understanding by asking workers to explain or show the control. Written communication must be plain and short. Communication must also run upwards: workers and representatives must be able to raise concerns without fear, which section 26 of the OHS Act protects.

8. External Stakeholders

Construction affects neighbours, road users, schools and businesses. The CHSM contributes to:

  • public safety notices, hoardings and traffic accommodation;
  • advance notice to neighbours of blasting, crane lifts over boundaries, road closures and noisy work;
  • liaison with municipal services, utility owners and emergency services; and

media and community communication after a serious incident, handled by designated spokespeople.

9. Recording Communication

If it is not recorded, it is hard to prove. Keep induction records (CR 7(7)), toolbox and DSTI attendance with the topic, minutes, safety alerts issued and acknowledged, and correspondence on design hazards and changes. These records show inspectors and auditors that information actually reached the people at risk.

Loading diagram... Health and Safety Information Chain on a Project