Study guide

8.2 Demolition Work, Structural Assessment & Control Zones (CR 14)

SACPCMP Construction Health & Safety Manager Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South African Occupational Health and Safety Legislation

1.1 The OHS Act Framework, General Duties of Employers and Employees 1.2 Corporate Governance and Section 16 Liability & Delegations 1.3 Worker Representation: Health & Safety Representatives and Committees 1.4 Mandatary Agreements, Acts/Omissions & Criminal Liability

2 Chapter 2: Construction Regulations 2014 & Legal Appointments

2.1 Construction Work Permits, Notifications & Client Duties 2.2 Designer Duties and Principal Contractor Obligations 2.3 Statutory Construction Supervision Appointments 2.4 The CHS Manager vs CHS Officer vs CHS Agent & Professional Registration

3 Chapter 3: Risk Assessment Methodologies & The HIRA Process

3.1 Fundamental Risk Terminology: Hazards, Risks, Consequences & Tolerability 3.2 The Three Tiers of HIRA: Baseline, Issue-Based & Continuous Risk Assessments 3.3 Risk Rating Matrices: Quantitative, Semi-Quantitative & Qualitative Scoring 3.4 Task-Based Risk Assessments (TBRA) & Workforce Participation

4 Chapter 4: Risk Control Hierarchy & Safe Work Procedures

4.1 The Hierarchy of Controls in Construction Operations 4.2 Developing and Implementing Safe Work Procedures (SWPs) and SOPs 4.3 Daily Safety Task Instructions (DSTI) and Pre-Task Risk Reviews

5 Chapter 5: Specifications, Plans & The Health and Safety File

5.1 Client Health and Safety Specifications 5.2 The Principal Contractor Health & Safety Plan: Structure and Approval 5.3 Compiling and Maintaining the Consolidated Health & Safety File 5.4 Subcontractor Safety File Verification and Onboarding

6 Chapter 6: Specialized Safety Plans, Method Statements & Registers

6.1 Comprehensive Fall Protection Planning (CR 10 Requirements) 6.2 Contractor Method Statements and Risk Alignment 6.3 Statutory Registers, Checklists, and Inspection Logs

7 Chapter 7: Working at Heights & Temporary Works

7.1 Working at Heights: Fall Prevention, Fall Arrest & Rescue Systems 7.2 Scaffolding Standards, Competent Inspection & SANS 10085 (CR 16) 7.3 Temporary Works Management: Formwork, Falsework & Support Structures (CR 12)

8 Chapter 8: Excavations, Demolition & Heavy Plant Operations

8.1 Excavation Safety, Shoring, Battering & Underground Services (CR 13) 8.2 Demolition Work, Structural Assessment & Control Zones (CR 14) 8.3 Mobile Plant, Construction Vehicles & Cranes (CR 22, 23)

9 Chapter 9: Electrical Safety, Hazardous Chemicals & Confined Spaces

9.1 Temporary Electrical Installations, Distribution Boards & SANS 10142 (CR 24) 9.2 Hazardous Chemical Agents (HCA) & the Globally Harmonized System (GHS) 9.3 Confined Space Entry, Atmospheric Testing & Emergency Protocols (GSR 5)

10 Chapter 10: Incident Reporting, Statutory Notifications & Investigations

10.1 OHS Act Section 24 Statutory Reporting Criteria and Timeframes 10.2 Compensation for Occupational Injuries and Diseases Act (COIDA) Compliance 10.3 Incident Scene Preservation and Evidence Gathering Protocols 10.4 Root Cause Analysis Methodologies (5 Whys, Fishbone) & CAPA

11 Chapter 11: Safety Auditing, Worker Consultation & Site Training

11.1 Internal Audits, Client Oversight Audits & Scoring Protocols (CR 5(1)(o), CR 7(1)(c)) 11.2 Non-Conformance Reports (NCRs), Corrective Actions & Close-Out Mandatory Site Induction, Competency Verification & Training Programs (CR 7(5)–(7)) 11.4 Medical Surveillance, Certificate of Fitness & Hygiene Monitoring (CR 7(8))

12 Chapter 12: Health and Safety Management Systems, Performance & Culture

12.1 Health and Safety Management Systems & ISO 45001 12.2 Health and Safety Performance Measurement, Statistics & Trend Analysis 12.3 Leadership, People & Health and Safety Culture 12.4 Innovation & Technology in Construction Health and Safety

13 Chapter 13: Emergency Preparedness, Communication & Health and Safety Procurement

13.1 Emergency Preparedness, Fire Precautions & First Aid (CR 29, GSR 3) 13.2 Health and Safety Communication, Consultation, Meetings & Reporting 13.3 Health and Safety Procurement & Cost Management

14 Chapter 14: Physical Agents, Environmental Management & Specialised Site Controls

14.1 Noise, Physical Agents & Ergonomics on Construction Sites 14.2 Environmental Management on Construction Projects 14.3 Specialised Site Controls: Structures, Platforms, Hoists, Plant & Facilities (CR 11, 15, 17-21, 25-28, 30)

8.2 Demolition Work, Structural Assessment & Control Zones (CR 14)

Key Takeaways Explain This Topic AI

Construction Regulation 14(1) requires a competent person appointed in writing to supervise and control all demolition work on site.

CR 14(2) requires a detailed structural engineering survey by a competent person before demolition, and a method statement developed by that person; CR 14(3) requires structural integrity checks during demolition at the intervals it sets.

Asbestos must be handled under the Asbestos Abatement Regulations 2020 (inventory, risk assessment, AIA appointment, registered contractor, clearance certificate), and lead under the Lead Regulations 2001 (CR 14(9)–(10)).

CR 14(5)–(7) prohibit dropping material outside the exterior walls unless the area is protected, require chutes steeper than 45° to be enclosed on four sides, and require chute designs that stop rubble free-falling.

CR 14(4) requires precautions against premature collapse, no work under unsupported overhangs, protection of adjoining structures, service isolation, lighting, safe access and catch platforms or fenced danger zones.

Last updated: October 2026

1. Statutory Architecture and the Demolition Supervisor (CR 14(1))

Demolition work is legally categorized among the highest-hazard activities in the construction lifecycle. Unlike new construction, where structural integrity increases progressively as elements cure and tie together, demolition systematically dismantles, weakens, and destabilizes structural equilibrium. Unplanned structural collapse, uncontrolled debris fall, severing of live building services, and exposure to legacy toxic materials (such as asbestos and lead) have historically produced multi-fatality disasters.

To establish rigorous governance, Construction Regulation 14(1) establishes a mandatory statutory command:

"A contractor must appoint a competent person in writing to supervise and control all demolition work on site."

The appointed Demolition Supervisor must possess advanced technical competence in structural engineering principles, building mechanics, demolition machinery, controlled explosive dynamics (where implosion is used), temporary propping, and environmental health controls. The Construction Health and Safety Manager (CHSM) should review the demolition supervisor's competency dossier, verifying their theoretical knowledge and practical track record in executing engineered deconstruction plans.

2. Pre-Demolition Structural Condition Assessment (CR 14(2))

Demolition must never commence based on assumptions or casual visual walkthroughs. Construction Regulation 14(2) places an affirmative, non-delegable statutory obligation on the contractor:

"A contractor must ensure that before any demolition work is carried out, and in order to ascertain the method of demolition to be used, a detailed structural engineering survey of the structure to be demolished is carried out by a competent person and that a method statement on the procedure to be followed in demolishing the structure is developed by that person."

Under CR 14(3), the competent person appointed under CR 14(1) must then check the structural integrity of the structure during demolition at the intervals set in the method statement, to avoid premature collapse.

The Regulation requires the survey to be done by a competent person ; for framed, prestressed or multi-storey structures that will in practice be a structural engineer or technologist, and many clients specify ECSA registration. The survey should document the following critical structural elements:

As-Built Structural Drawings and Load Paths : Review of original design documentation to understand the structural framing system (e.g., reinforced concrete moment frame, flat slab with drop panels, structural steel truss, or unreinforced load-bearing masonry).

Material Degradation and Structural Defects : Identification of spalled concrete, corroded steel reinforcement, cracked transfer beams, decayed timber roof trusses, or foundation settlement that could trigger sudden brittle failure under dynamic demolition loads.

Prestressed and Post-Tensioned Concrete Tendons : The presence of prestressed or post-tensioned concrete beams and slabs represents an extreme hazard. High-tensile steel tendons within these elements are locked under immense hydraulic tension (often exceeding hundreds of kilonewtons). If an excavator breaker, saw, or cutting torch cuts through an unbonded or bonded post-tensioned tendon without engineered de-tensioning, the tendon releases stored kinetic energy explosively. Tendons can whip through concrete slabs, violently eject anchorage end-blocks through exterior walls, and cause instantaneous progressive collapse of the floor system. Demolition of prestressed elements requires specialized step-by-step de-stressing method statements signed off by the structural engineer.

Cantilevers and Overhanging Features : Balconies, cantilevered canopies, and architectural cornices rely entirely on continuous back-span reinforcement for stability. Any premature cutting or vibration damage to the back-span slab will cause immediate cantilever detachment.

Adjacent Structures and Shared Party Walls : A comprehensive dilapidation survey (including high-resolution photographic logs and crack monitoring gauges) of all adjacent properties must be conducted before demolition starts. The survey must assess whether the removal of the structure will destabilize neighboring foundations, requiring underpinning, sheet piling, or temporary structural shoring.

3. Pre-Demolition Hazardous Materials Survey and Abatement

Older commercial and industrial buildings routinely harbor hazardous chemical and mineral substances that, if disturbed by mechanical shears or hydraulic hammers, disperse toxic dust clouds across surrounding neighborhoods. Prior to structural demolition, a comprehensive hazardous materials survey must be completed:

Asbestos-Containing Materials (ACM) : CR 14(9) requires asbestos work identified by the risk assessment to be done under the asbestos regulations, now the Asbestos Abatement Regulations 2020 . These require an inventory of asbestos in place and an asbestos risk assessment by a competent person (reviewed by an approved inspection authority), the written appointment of an approved inspection authority (AIA) , notification of the work, removal or repair by a registered asbestos contractor for type 2 and type 3 asbestos work under an approved plan of work, and an AIA clearance certificate after the work. Common ACM includes asbestos-cement roof sheets, gutters and pipes, insulating board, pipe and calorifier lagging, and vinyl floor tiles. Remove asbestos that will be disturbed before general demolition begins, and dispose of it as hazardous waste.

Lead-Based Paints and Coatings : Older structures frequently feature structural steel coated with lead-pigmented primer (red lead); CR 14(10) requires lead work to comply with the Lead Regulations 2001. Hot-work cutting (oxy-acetylene torching) vaporizes lead into highly toxic lead fumes, causing systemic lead poisoning. Lead surveys must establish coating concentrations, dictating mechanical cold-cutting shears or localized paint stripping with full positive-pressure respiratory protection and local exhaust extraction.

Polychlorinated Biphenyls (PCBs) and Mercury : Fluorescent light ballasts, high-voltage transformers, and old capacitor banks must be inspected for PCBs. Mercury vapor lamps, mercury switches, and pneumatic control lines must be de-energized, segregated, and disposed of as hazardous electronic waste.

Flammable and Toxic Residues : In chemical or manufacturing plants, all pipelines, vessels, fuel storage tanks, and effluent pits must undergo a formal purge, chemical wash, and explosive gas testing (zero LEL) with a signed gas-free certificate from a competent person before hot demolition work commences.

4. Demolition Methodologies and Engineering Controls

The choice of demolition methodology depends on building height, structural framing, urban density, and spatial clearance boundaries:

Top-Down Manual / Piecemeal Deconstruction : The standard methodology for dense urban multi-storey structures where spatial constraints prevent mechanical tipping or blasting. Work proceeds progressively floor-by-floor, strictly from the roof downward. Lightweight machinery (e.g., mini-excavators, remote-controlled Brokk demolition robots) or manual breaker teams dismantle non-load-bearing partitions first, followed by floor slabs, secondary beams, main beams, and finally structural columns.

Mechanical Demolition using High-Reach Excavators : Deployed where adequate site perimeter clearances exist. Specialized high-reach excavators (boom reaches up to 40 to 60 meters) equipped with hydraulic rotating pulverizers, steel shears, or concrete crushing jaws systematically chew down structural bays from the top down. Hydraulic shears crush concrete, releasing rebar that is subsequently cut, eliminating uncontrolled impact shocks.

Controlled Explosive Implosion : Utilized for extremely tall or massive reinforced concrete and steel structures (e.g., cooling towers, high-rise buildings, mine headgears). Highly specialized blast engineers and structural consultants calculate precise charges of commercial high explosives (e.g., RDX, dynamite, linear shaped charges) placed into pre-drilled holes in selected load-bearing columns. The columns are pre-weakened by stripping surrounding non-structural concrete. Millisecond delay detonators collapse key load-bearing bays sequentially, causing gravity to fold the building inward upon its own footprint. Implosion requires extensive public exclusion zones, air space clearances, municipal disaster management sign-off, and vibration dampening trenches.

5. Demolition Sequencing Rules and Structural Slab Loading

Catastrophic progressive collapses occur when demolition contractors violate the fundamental structural mechanics of load distribution. The CHSM and Demolition Supervisor must enforce strict sequencing rules:

The Cardinal Sequencing Rule : Never weaken, sever, or remove lower-level load-bearing structural members (columns, load-bearing masonry walls, structural piers, or primary transfer beams) before the upper levels and supported floor slabs have been completely removed. Lower floors are sized to carry the dead weight of the entire structure above; cutting a lower-level column shifts enormous redistributed axial loads onto neighboring columns, inducing catastrophic buckling.

Floor Slab Load Capacity and Mobile Plant Operation : When mini-excavators (e.g., 3-tonne to 8-tonne machines) or skid-steer loaders are lifted onto upper suspended floor slabs to assist with top-down demolition, the structural engineer must calculate the residual live load capacity of the slab. Slabs are generally designed for human occupancy and light office live loads ( 2.5 − 5.0 kPa 2.5 - 5.0\text{ kPa} 2.5 − 5.0 kPa ), which is vastly inferior to the concentrated point loads exerted by tracked machinery ( 20 − 50 kPa 20 - 50\text{ kPa} 20 − 50 kPa ). To prevent the excavator from punching through the suspended concrete floor:

Propping and Back-Propping : Heavy-duty structural steel props (such as Acrow props or modular shore-loading towers) must be systematically installed beneath the working slab, extending across at least two to three consecutive floors below , redistributing dynamic machine loads down to the building foundations.

Rubble Surcharge Management : Piles of demolition rubble must not be allowed to accumulate on elevated slabs. Concrete rubble has an approximate bulk density of 2 , 400 kg/m 3 2,400\text{ kg/m}^3 2 , 400 kg/m 3 . Accumulating rubble creates an immense surcharge load that can cause sudden slab shear collapse. Rubble must be continuously swept and discharged down engineered chutes.

6. Control Zones, Exclusion Boundaries, and Debris Chutes (CR 14(4)–(7))

Uncontrolled falling rubble represents a lethal hazard to site personnel, neighboring tenants, and passing motorists. Construction Regulation 14 imposes stringent boundary controls:

Calculation of Exclusion Zones : A clearly barricaded exclusion zone must be established around the entire perimeter of the demolition footprint. The horizontal exclusion radius must be calculated based on structural drop mechanics: for mechanical pulling or toppling, the minimum exclusion zone is 1.5 times the height of the building or structural section being dropped ( 1.5 × H 1.5 \times H 1.5 × H ) . Within dense urban streetscapes, this requires official municipal permits for full street closures, bus route diversions, and pedestrian re-routing.

Perimeter Hoardings and Catch-Fans : The site boundary must be secured by heavy-duty timber or sheet-steel hoardings (minimum 2.1 to 2.4 meters in height ). In multi-storey deconstruction, cantilevered catch-fans (heavy steel brackets lined with timber decking and wire debris mesh) must be installed at perimeter floor levels directly beneath the working floor, projecting outwards by at least 2.0 to 3.0 meters to arrest bouncing masonry. The exterior facade must be shrouded in continuous, fire-retardant heavy debris shade cloth netting.

Debris Chutes and Drop Holes (CR 14(5)–(7)) :

Under CR 14(5) , no material may be dropped to any point outside the exterior walls of the structure unless the area is effectively protected.

Under CR 14(6) , waste and debris may be disposed of from a high place by chute only if the chute is adequately constructed and rigidly fastened; enclosed on all four sides if inclined at more than 45° to the horizontal (open chutes must be inclined at less than 45°); fitted with a gate at the bottom where necessary to control flow; and discharges into a container or an enclosed area surrounded by barriers. CR 14(7) requires chutes to be designed so that rubble does not free-fall and strong enough for the debris.

In practice chutes are tied into the structure at every level and fitted with baffles to slow debris.

The ground discharge zone must be fully barricaded with a rigid perimeter fence and warning signage, with entry permitted only when upper-level tipping operations are fully halted and locked out.

Where internal floor drop holes are cut through slabs to drop rubble down an elevator shaft or internal core, substantial guardrails (1.0 meter high with intermediate rails and toe-boards) must enclose the opening, and the base of the shaft must be designated a restricted exclusion zone.

7. Environmental Controls: Dust, Noise, and Vibration

Demolition creates intense environmental friction with adjacent urban communities. The CHSM must implement active environmental mitigation systems:

Dust Suppression : High-pressure water atomizing mist cannons (fog cannons) and direct fire-hose wetting must be deployed at demolition breaker tips and drop chutes to suppress respirable crystalline silica (RCS) dust at source without creating excessive slurry pooling.

Vibration and Acoustic Monitoring : Triaxial seismographs must be installed on adjacent boundary walls to continuously monitor peak particle velocity (PPV). Structural damage thresholds (typically 5 − 15 mm/s 5 - 15\text{ mm/s} 5 − 15 mm/s depending on the age and condition of neighboring heritage structures) must trigger immediate automated alarms to halt destructive hydraulic hammering and switch to diamond wire sawing.

Loading diagram... Demolition Governance, Structural Conditioning & Safety Controls (CR 14)