Study guide

15.1 Health and Safety in Procurement and Tendering

SACPCMP Construction Health & Safety Officer CHSO

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South African Occupational Health and Safety Act (OHS Act 85 of 1993)

1.1 Scope, Purpose, and General Employer Duties (Sections 8, 9, 10) 1.2 Employee Duties, Rights, and Health & Safety Representation (Sections 14, 17, 18, 19, 20) 1.3 Corporate Governance, Accountability, and Mandatary Agreements (Sections 16, 37, 44)

2 Chapter 2: Construction Regulations 2014: Governance & Key Roles

2.1 Scope, Construction Work Permits, and Notifications (Regulations 1, 3, 4, Annexure 2) 2.2 Statutory Duties of Clients, Designers, and Principal Contractors (Regulations 5, 6, 7) 2.3 Site Supervision and Management Appointments (Regulation 8: CR 8(1), 8(2), 8(5), 8(7), 8(8))

3 Chapter 3: Compensation, Liability, and Administrative Regulations

3.1 Compensation for Occupational Injuries and Diseases Act (COIDA 130 of 1993) & Civil Liability 3.2 General Administrative Regulations (GAR) 2003: Reporting & Investigating Provisions 3.3 SACPCMP Statutory Mandate, Registration Rules, and Code of Conduct

4 Chapter 4: Risk Assessment Methodologies & Types

4.1 The Three Tiers of Construction Risk Assessment: Baseline, Issue-Based, and Continuous (CR 9) 4.2 Qualitative and Semi-Quantitative Risk Scoring (Probability, Severity, Matrix Evaluation) 4.3 Hierarchy of Risk Controls: From Elimination to Personal Protective Equipment

5 Chapter 5: Safe Work Procedures, Method Statements & Dynamic Risk

5.1 Developing Safe Work Procedures (SWPs) from Risk Assessments 5.2 Safe Work Method Statements (SWMS) and Task Execution 5.3 Daily Safe Task Instructions (DSTI), Toolbox Talks, and Dynamic Site Risk Management

6 Chapter 6: Health and Safety File & Planning Documentation

6.1 Client Health and Safety Specifications vs. Principal Contractor Health and Safety Plan 6.2 Structure, Contents, and Maintenance of the Site Health and Safety File (CR 7(1)(b), 7(2)(b) & 7(1)(e)) 6.3 Contractor Vetting, Approval, and Monthly Compliance Auditing (CR 5(1)(o) & CR 7)

7 Chapter 7: Statutory Registers, Checklists & Legal Appointments

7.1 Equipment and Plant Registers: Scaffolding, Ladders, and Portable Electrical Tools 7.2 Medical, Occupational Hygiene, and PPE Registers 7.3 Compiling, Signing, and Enforcing Legal Letters of Appointment on Site

8 Chapter 8: High-Risk Works: Working at Heights & Scaffolding

8.1 Fall Protection Plans, Fall Prevention, and Fall Arrest Systems (CR 10) 8.2 Scaffolding Erection, Tagging, and SANS 10085 Standards (CR 16) 8.3 Suspended Platforms, Boatswain's Chairs, and Rope Access (CR 17 & CR 18)

9 Chapter 9: Groundworks, Temporary Works & Heavy Operations

9.1 Excavations, Shoring, and Ground Stability Safeguards (CR 13) 9.2 Temporary Works, Formwork, and Support Work Safety (CR 12) 9.3 Cranes, Material Hoists, and Mobile Plant Operations (CR 19, CR 22, CR 23, DMR 18)

10 Chapter 10: Site Infrastructure, Fire, Electrical & Occupational Health

10.1 Temporary Electrical Installations and Portable Electrical Tools (CR 24 & SANS 10142) 10.2 Fire Precautions, Flammable Store Management, and Housekeeping (CR 25, 27, 28, 29) 10.3 Occupational Health Hazards: Noise Zones, Hazardous Chemical Agents, and Facilities (CR 30)

11 Chapter 11: Incident Notification, Reporting & Statutory Investigations

11.1 Section 24 Reportable Incidents vs. Minor Work Injuries: Thresholds and Windows 11.2 Incident Scene Management, Evidence Preservation, and Witness Interviewing 11.3 Incident Investigation Methodologies (GAR 9, 5 Whys, Root Cause Analysis) and CAPA

12 Chapter 12: Emergency Preparedness, First Aid & Safety Culture

12.1 Site Emergency Preparedness Plans, Evacuation Drills, and Alarms (CR 29) 12.2 First Aid Requirements, Box Standards, and Emergency Medical Services (GSR 3) 12.3 Mandatory Site Induction, Worker Participation, and Refusal of Dangerous Work

13 Chapter 13: Health and Safety Management Systems and Governance

13.1 Health and Safety Management Systems: ISO 45001 and the Plan-Do-Check-Act Cycle 13.2 Health and Safety Policy, Organising, and the Section 16(2) Chain of Accountability 13.3 Documented Information, Internal Audit, and Management Review

14 Chapter 14: Health and Safety Performance, Auditing and Reviews

14.1 Measuring Health and Safety Performance: Leading Indicators, DIFR and LTIFR 14.2 Inspections, Audits and Legal Compliance Auditing 14.3 Non-conformance, Corrective Action and Continual Improvement

15 Chapter 15: Health and Safety Procurement, Cost and Contractor Management

15.1 Health and Safety in Procurement and Tendering 15.2 Health and Safety Cost Management: Pricing, Budgeting and the Cost of Failure 15.3 Contractor Management Through the Project Life Cycle

16 Chapter 16: Communication, Safety Culture and Technology

16.1 Health and Safety Communication Management and Reporting to Decision Makers 16.2 People, Safety Culture and Worker Participation 16.3 Innovation and Technology in Construction Health and Safety

17 Chapter 17: Occupational Hygiene, Medical Surveillance, Environment and Ergonomics

17.1 Hazardous Chemical Agents, Asbestos and Lead on Construction Sites 17.2 Medical Surveillance and the Annexure 3 Certificate of Fitness 17.3 Environmental Management on Construction Sites 17.4 Ergonomics, Manual Handling and Physical Agents

18 Chapter 18: Enforcement, Standards and Remaining High-Risk Construction Works

18.1 Enforcement: Inspector Powers, Notices, Inquiries and Penalties 18.2 Incorporated Standards, SANS and Personal Protective Equipment Selection 18.3 Demolition Work and Structural Stability 18.4 Tunnelling, Water Environments, Bulk Mixing Plant, Material Hoists and Explosive Actuated Devices 18.5 Hazard Identification Techniques and Permit-to-Work Systems

15.1 Health and Safety in Procurement and Tendering

Key Takeaways Explain This Topic AI

The client's procurement chain runs CR 5(1)(a) baseline risk assessment, CR 5(1)(b) site-specific specification, CR 5(1)(f) inclusion in tender documents, CR 5(1)(g) cost adequacy check, CR 5(1)(h) competence check, CR 5(1)(j) COIDA standing, CR 5(1)(k) written appointment, CR 5(1)(l) plan approval.

CR 7(1)(c)(i)-(x) repeats that discipline one tier down, and CR 7(3) cascades the principal contractor's duties to any contractor that appoints a further contractor.

CR 3(5) makes procurement compliance a precondition of a construction work permit, requiring written proof that CR 5(1)(c) to (h) and CR 5(1)(j) have been complied with before the permit may be granted.

Pre-qualification must test legal standing, competence, resources and track record - with SACPCMP registration numbers verified against the Council register rather than accepted on a CV.

A generic health and safety specification contravenes CR 5(1)(b), which requires the document to be site specific and based on the baseline risk assessment, and leaves tenderers unable to price hazards they were never told about.

Last updated: September 2026

15.1 Health and Safety in Procurement and Tendering

Note

SACPCMP Blueprint Context : "Health and Safety Procurement Management" is item 10 of the Construction Health and Safety core knowledge list in Annexure B of the SACPCMP Rules for Registration , and the candidate logbook in Annexure G requires separate recorded evidence under that heading. The Annexure H scope of services for construction health and safety practitioners places tender-stage duties squarely in the professional's work: assisting with project-specific health and safety tender documentation, and assisting with the evaluation of contractors' competencies, knowledge and resources to carry out the works safely.

1. Procurement Is Where Site Safety Is Actually Decided

By the time a subcontractor's crew arrives at a gate, the most consequential safety decisions have already been made: what was priced, who was selected, what documents were issued, and what the programme allows. A CHSO who engages only at site level is managing the consequences of decisions taken months earlier by people who never met them.

South African law recognises this and places explicit duties at the procurement interface. The chain runs client → principal contractor → contractor → lower-tier contractor, and each link repeats a similar set of obligations.

2. The Client's Procurement Duties (Regulation 5)

  • Provision Duty
  • CR 5(1)(a) Prepare a baseline risk assessment for the intended construction work project

CR 5(1)(b) Prepare a suitable, sufficiently documented and coherent site-specific health and safety specification based on that baseline risk assessment

CR 5(1)(c)-(e) Provide the specification to the designer, ensure the designer takes it into consideration during design, and ensure the designer carries out all CR 6 responsibilities

CR 5(1)(f) Include the health and safety specification in the tender documents

CR 5(1)(g) Ensure that potential principal contractors submitting tenders have made adequate provision for the cost of health and safety measures

CR 5(1)(h) Ensure the principal contractor to be appointed has the necessary competencies and resources to carry out the construction work safely

CR 5(1)(j) Ensure, before any work commences , that every principal contractor is registered and in good standing with the compensation fund or a licensed compensation insurer under COIDA

CR 5(1)(k) Appoint every principal contractor in writing for the project or part of it

CR 5(1)(l) Discuss and negotiate the contents of the principal contractor's health and safety plan and thereafter finally approve that plan for implementation

The order matters and is examinable. The baseline risk assessment precedes the specification; the specification precedes and shapes the design; the specification goes into the tender; adequacy of health and safety pricing is checked at tender evaluation; competence and COIDA standing are checked before appointment; and the health and safety plan is negotiated and approved before implementation. A client who issues a tender without the specification has broken the chain at its second link, and every downstream document inherits the defect.

Important

CR 3(5) makes procurement compliance a precondition of the permit. A construction work permit may be granted only if the completed documents contemplated in CR 5(1)(a) and (b) have been submitted, and proof in writing has been submitted that the client complies with CR 5(5), that the principal contractor is registered and in good standing under CR 5(1)(j), and that CR 5(1)(c), (d), (e), (f), (g) and (h) have been complied with. On a permit project the Department of Employment and Labour therefore inspects the procurement process itself before a spade breaks ground.

3. The Principal Contractor's Procurement Duties (Regulation 7)

Construction Regulation 7(1)(c) repeats the pattern one tier down. On appointing any other contractor, the principal contractor must:

CR 7(1)(c)(i) — provide contractors who are tendering with the relevant sections of the client's health and safety specification pertaining to the work to be performed;

CR 7(1)(c)(ii) — ensure that potential contractors submitting tenders have made sufficient provision for health and safety measures during the construction process;

CR 7(1)(c)(iii) — ensure that no contractor is appointed unless the principal contractor is reasonably satisfied that the contractor has the necessary competencies and resources to perform the construction work safely;

CR 7(1)(c)(iv) — ensure, prior to work commencing , that every contractor is registered and in good standing with the compensation fund or a licensed compensation insurer under COIDA;

CR 7(1)(c)(v) — appoint each contractor in writing for its part of the project;

CR 7(1)(c)(x) — discuss and negotiate the contents of the contractor's health and safety plan and thereafter finally approve it.

CR 7(3) extends the duties in CR 7(1)(b) to (g) to any contractor that appoints a further contractor, so the same procurement discipline cascades to the fourth and fifth tiers where the real risk on South African sites frequently sits.

4. Pre-qualification: Testing Competence and Resources Before Award

"Necessary competencies and resources" is not satisfied by a letter of good standing and a company profile. A defensible pre-qualification pack for a construction contractor tests four dimensions:

Dimension Evidence a CHSO should require

Legal standing Current COIDA letter of good standing or licensed compensation insurer certificate; company registration; CIDB grading appropriate to the works

Competence CVs and appointment letters for the CR 8(1) construction manager and CR 8(5) health and safety officer, with SACPCMP registration numbers verified against the Council register; operator certificates for the specific plant to be used; competent person appointments for the specific high-risk activities tendered (CR 12(1)-(2), CR 13(1)(a), CR 16(1), CR 17(1), CR 18(1)(a))

Resources Supervision ratios against planned headcount; plant schedule with current DMR 18(5) test certificates; PPE provision plan; a named, contactable health and safety resource

Track record Three years of DIFR/LTIFR with exposure hours; section 24 reportables and the corrective actions taken; any prohibition or contravention notices received and their close-out

The track-record column requires care. A small subcontractor with genuinely low exposure hours will show volatile rates, and refusing to award on that basis excludes competent small enterprises. Ask instead what the contractor did after its last serious event.

5. What Goes Into the Tender Document

A health and safety tender pack that produces comparable, priceable bids contains:

The client's health and safety specification (CR 5(1)(f)) or the relevant sections of it (CR 7(1)(c)(i));

The baseline risk assessment or an extract identifying the significant hazards the tenderer must price against;

  • A pricing schedule for health and safety as a separately measured item — covered in detail in section 15.2;
  • The pre-qualification questionnaire and the evidence list above;

Site-specific constraints that drive cost: access restrictions, adjacent occupied buildings, working-hour limits, existing services, and any permit or notification status under CR 3 or CR 4;

The required deliverables and their due dates : health and safety plan for negotiation and approval, appointment letters, risk assessments, method statements, medical certificates of fitness in the form of Annexure 3 under CR 7(8).

Warning

The single most common South African procurement failure is issuing a generic specification that could belong to any project. Construction Regulation 5(1)(b) requires the specification to be site specific and based on the baseline risk assessment . A specification that never mentions the actual hazards — the live substation, the 6-metre retaining excavation, the occupied ward next door — has not been prepared in accordance with the regulation, and a contractor cannot price what it has not been told.

Loading diagram... The Statutory Procurement Chain from Baseline Risk Assessment to Approved Health and Safety Plan