ExamFinch.com My Study

Study guide

ASME GDTP Technologist study guide

Read a lesson, then practice the ideas you want to remember.

Practice this exam

Lessons

  1. Application of Dimensions & Location of Feat
  2. Dimensioning Features: Diameters, Radii, Cha
  3. Engineering Drawing Standards, Drawing Units
  4. ASME GDTP Technologist Exam Scope, Prometric
  5. Fundamental Rules of ASME Y14.5-2009 — Free Study Guide 2026
  6. Composite Profile Tolerances vs. Multiple Si
  7. Bilateral, Unilateral, & Unequally Disposed
  8. Profile Applications: Conicity, Extruded and
  9. Modifier Rules for Profile & Combined Contro
  10. Profile of a Line & Profile of a Surface Fun
  11. Profile Verification, Coplanarity Controls,
  12. Circular Runout vs. Total Runout Interpretat
  13. Comparative Analysis: Runout vs. Form, Orien
  14. Features, Features of Size, & Limits of Size
  15. Material Condition Concepts: MMC, LMC, & RFS
  16. Rule #1, Its Exceptions & Overrides — Free Study Guide 2026
  17. Direct Tolerancing, Limit Dimensioning, & An
  18. Feature Control Frame Placement, Combined Fr
  19. The 14 Geometric Characteristic Symbols, Fea
  20. Screw Threads, Gears & Splines, Angular Surf
  21. Theoretical Datums, Datum Feature Simulators
  22. Degrees of Freedom Constraint & The 3-2-1 Da
  23. Planar, Cylindrical, & Width Datum Feature E
  24. Rotational Constraint About a Datum Axis or
  25. Functional Datum Feature Selection, Multiple
  26. Datum Target Points, Lines, Areas, & Movable
  27. Irregular & Complex Datum Features, Mathemat
  28. Material Boundary Modifiers & Datum Shift Ca
  29. Circularity & Cylindricity Controls, Differe
  30. Flatness & Straightness Controls for Surface
  31. Parallelism Controls for Planar Surfaces & C
  32. Perpendicularity & Angularity Tolerances wit
  33. Bonus Tolerance & Virtual Condition Calculat
  34. Position Tolerancing Fundamentals, True Posi
  35. Projected Tolerance Zones & Fixed vs. Floati
  36. Surface vs. Axis Interpretation of Position
  37. Zero Positional and Orientation Tolerancing
  38. Coaxial Holes, Counterbored Holes, Non-Paral
  39. Concentricity & Symmetry Tolerances Under AS
  40. Functional Gaging Principles & Inspection Ve
  41. LMC Applied to Position: Wall Thickness, Bre
  42. Hole & Slot Patterns, Multi-Segment Frames,