Study guide

ICC P2 study guide

Read a lesson, then practice the ideas you want to remember.

Lessons

  1. Accessible Fixtures and Controls — Free Study Guide 2026
  2. Minimum Fixture Counts and Clearance Require
  3. Water Conservation, Faucets, and Fittings
  4. General Plumbing Regulations — Free Study Guide 2026
  5. Scope, Administration, and Enforcement — Free Study Guide 2026
  6. Hangers, Support, and Sizing Fundamentals
  7. Piping Installation and Joint Connections
  8. Piping Protection — Free Study Guide 2026
  9. Cleanouts and Building Sewers — Free Study Guide 2026
  10. Drainage Piping Installation and Slopes
  11. Drainage Fixture Units and Sizing — Free Study Guide 2026
  12. Sumps, Ejectors, and Backwater Valves — Free Study Guide 2026
  13. Fuel Gas Piping Installation — Free Study Guide 2026
  14. Medical Gas and Nonflammable Gas Systems
  15. Nonpotable Water Systems and Graywater Stora
  16. Roof Drains and Conductors — Free Study Guide 2026
  17. Storm Drainage Sizing — Free Study Guide 2026
  18. Subsoil Drainage and Sump Pumps — Free Study Guide 2026
  19. Interceptors and Separators — Free Study Guide 2026
  20. Special Waste and Chemical Neutralization Sy
  21. Trap Design and Installation — Free Study Guide 2026
  22. Circuit Venting — Free Study Guide 2026
  23. Combination Waste & Vent Systems and Air Adm
  24. Vent Sizing and Developed Length — Free Study Guide 2026
  25. Venting Methods and Materials — Free Study Guide 2026
  26. Water Heater Venting and Combustion Air
  27. Safety Devices and T&P Relief Valves — Free Study Guide 2026
  28. Sizing and Installation Requirements — Free Study Guide 2026
  29. Cross-Connection Control and Backflow Preven
  30. Hot Water Systems and Recirculation — Free Study Guide 2026
  31. Potable Water Sizing and Demands — Free Study Guide 2026
  32. Water Service and Distribution Materials & J