Study guide

NEBB Testing, Adjusting and Balancing Certified Technician (CT) study guide

Read a lesson, then practice the ideas you want to remember.

Lessons

  1. NEBB TAB CT Role, CP Guidance, Standards, an
  2. Interpreting Plans, Schedules, and Control S
  3. Field Verification, Pre-TAB Readiness, and D
  4. Expansion Tanks, Point of No Pressure Change
  5. Hydronic Pressure, Head, Open and Closed Sys
  6. Balancing Valves, Circuit Setters, Strainers
  7. Centrifugal Pumps, Pump Curves, and Pump Aff
  8. Field Safety, Electrical Boundaries, Pressur
  9. Integrated TAB Problem Solving and Measureme
  10. Project Acceptance Criteria, Data Traceabili
  11. Air-Side Sensible, Latent, and Total Heat Tr
  12. Hydronic Heat Transfer, Glycol Corrections,
  13. TAB Mathematics, Units, Ratios, and Formula
  14. Psychrometric Processes, Air Mixing, and Coi
  15. Psychrometric Properties and Reading the Cha
  16. Airflow Instruments: Hoods, Anemometers, and
  17. Electrical and Rotational Instruments — Free Study Guide 2026
  18. Hydronic Pressure and Temperature Instrument
  19. Pressure Instruments, Manometers, Zeroing, a
  20. Air-System Configurations and System Relatio
  21. Airflow Continuity, Standard Air, Density, a
  22. Duct Geometry and Worked Airflow Calculation
  23. Traverse Locations, Disturbances, and Point
  24. Traverse Velocity Conversion and Airflow Cal
  25. Outside Air, Exhaust Balancing, and Building
  26. Proportional Air Balancing and Final Verific
  27. Terminal Devices, Effective Area, and Captur
  28. Belts, Sheaves, Alignment, and Variable Freq
  29. Fan Affinity Laws, Pressure, and Power — Free Study Guide 2026
  30. Fan Types, Performance Curves, and Rotation
  31. Motors, Single- and Three-Phase Measurements
  32. HVAC Control Fundamentals, Signals, and Test
  33. VAV System Balancing, Diversity, and Static-
  34. VAV Terminal Types, Airflow Sensors, and Cal