Study guide
ITC Level II study guide
Read a lesson, then practice the ideas you want to remember.
Lessons
- Planck's Curves and Wien's Displacement Law
- Radiant Power and Stefan-Boltzmann Law — Free Study Guide 2026
- Real Surfaces: Emissivity, Reflectivity, Tra
- Air Infiltration and Blower-Door IR — Free Study Guide 2026
- Inspection Conditions: ΔT, Wind, and Timing
- Insulation Defects and Thermal Bridging
- Moisture Signatures and Flat Roof Protocols
- Equipment Calibration and Accuracy Specs
- Cross-Verification with Contact Thermometers
- Filters, Windows, and Spectral Consideration
- Atmospheric Temperature, RH, and Distance
- Detectors, Optics, and Imager Specifications
- The Five Required Camera Parameters — Free Study Guide 2026
- Target Size, IFOV, and Distance-to-Spot Rati
- IR Window Transmittance Corrections — Free Study Guide 2026
- Capacitor, Bus, and Connection Anomalies
- High-Voltage Inspection Conditions and Load
- Three-Phase Electrical Fault Patterns — Free Study Guide 2026
- Transformer and Switchgear Thermography
- Emissivity Tables: Metals and Non-Metals
- Reflected Apparent Temperature Methods — Free Study Guide 2026
- Reference Emitter, Tape, and Paint Methods
- Why Emissivity Correction Matters at Level I
- About the Level II Exam — Free Study Guide 2026
- Level I vs Level II Scope and Prerequisites
- Bearing and Rotating Equipment Signatures
- Mechanical Drive and Alignment Indicators
- Steam Trap and Steam System Inspection — Free Study Guide 2026
- Equipment Identification and Finding Reclass
- Parameter Verification and Coverage Review
- Supervisory Sign-Off Responsibilities — Free Study Guide 2026
- Professional Ethics and Client Communication
- Image Processing and Report Generation Softw
- Paired Image Documentation and Presentation
- Quantitative Report Content Requirements
- Absolute Temperature Limits — Free Study Guide 2026
- Building Envelope Criteria — Free Study Guide 2026
- ISO 18434 and Machinery Severity Criteria
- Load and Ambient Correction of Absolute Limi
- NETA ATS Table 100.18 and Repair-Priority Co
- Heat Transfer Modes and Conduction Variables
- Thermal Science: Temperature, Energy Units,
- Contact vs Non-Contact Thermometers — Free Study Guide 2026
- Identifying and Reducing Measurement Errors
- Temperature Scales and Conversions — Free Study Guide 2026
- Establishing Baselines and Documentation
- Rate-of-Change and Multi-Inspection Trending
- Escalation Criteria from Trend Data — Free Study Guide 2026