Study guide
ASE T1 Gasoline Engines (Medium/Heavy Truck) study guide
Read a lesson, then practice the ideas you want to remember.
Lessons
- Actuator and Low-Side Driver Testing — Free Study Guide 2026
- No-DTC Driveability Diagnosis — Free Study Guide 2026
- DTC States and MIL Operation — Free Study Guide 2026
- PCM Power Feeds and Loaded Grounds — Free Study Guide 2026
- PCM Programming and Network Diagnosis — Free Study Guide 2026
- Readiness, Freeze Frame and Repair Verificat
- Scan Data and Freeze-Frame Interpretation
- Sensor Circuits and Shared References — Free Study Guide 2026
- Service Literature and Diagnosis with DTCs
- Head Disassembly, Cracks, Threads and Plugs
- Head Metrology and Gasket Installation — Free Study Guide 2026
- Lifter Preload, Valve Lash and OHC Service
- Pushrods, Rockers and Valve-Train Harnesses
- Valve Seats, Springs and Stem Seals — Free Study Guide 2026
- Valve and Guide Inspection — Free Study Guide 2026
- Catalyst Oxygen Storage and Five-Gas Analysi
- EGR Flow, Feedback and Service — Free Study Guide 2026
- EVAP Monitors and Leak-Test Procedures — Free Study Guide 2026
- EVAP Flow, Purge and Refueling Faults — Free Study Guide 2026
- PCV Flow and Crankcase Pressure — Free Study Guide 2026
- Secondary AIR Operation and Diagnosis — Free Study Guide 2026
- Bearing Fit, Clearance and Crankshaft Endpla
- Block Inspection and Cylinder Bore Metrology
- Pans, Covers, Seals and Sealants — Free Study Guide 2026
- Crankshaft Inspection and Bearing Wear Evide
- Cam Bearings, Lobe Lift and Endplay — Free Study Guide 2026
- In-Block Lifters and Timing Drive — Free Study Guide 2026
- Pistons, Ring Fits and Installation — Free Study Guide 2026
- Rods, Vibration Damper and Flywheel Inspecti
- Air Filtration and Intake Leak Diagnosis
- Electronic Throttle Testing and Learning
- Exhaust Leaks and Restriction Testing — Free Study Guide 2026
- Fuel Trim and Driveability Diagnosis — Free Study Guide 2026
- Fuel Pressure, Volume and LPG Applications
- Fuel Pump Circuits and Current Waveforms
- Fuel Tanks, Lines and Fuel Quality — Free Study Guide 2026
- Gasoline Direct Injection Diagnosis and Serv
- Injector and Fuel Rail Testing — Free Study Guide 2026
- Concern Verification and Service Information
- Coolant Vapor, Rich Mixture and Exhaust Soun
- Lower-End Noise and Cylinder Cut-Out Evidenc
- Oil Consumption and Blue Exhaust Smoke — Free Study Guide 2026
- Fluid Leak Isolation and Gauge Verification
- Valvetrain, Accessory and Vibration Diagnosi
- Battery Condition, Parasitic Draw & Starting
- Charging System Performance, Voltage Drop &
- DMM, Scope and Scan-Tool Evidence — Free Study Guide 2026
- Harness, Connector and Schematic Diagnosis
- Cylinder Leakage and Combustion-Leak Block T
- Dry, Wet and Running Compression — Free Study Guide 2026
- Vacuum Principles and Controlled Dynamic Tes
- Cylinder Power Balance and Contribution Test
- Vacuum Patterns and Manifold Pressure Diagno
- Ignition DTCs and Misfire Data — Free Study Guide 2026
- Ignition Modules and Profile Learning — Free Study Guide 2026
- CKP/CMP Sensor and Correlation Tests — Free Study Guide 2026
- Ignition Symptoms and Combustion Knock — Free Study Guide 2026
- Primary Ignition Circuits and Coil Testing
- Spark Plugs and Secondary Waveforms — Free Study Guide 2026
- ASE T1 Exam Format, Scoring, Fees & Certific
- Class 4–8 Gasoline & LPG Truck Engines and A
- Coolant Testing and Water Pump Service — Free Study Guide 2026
- Overheating, Overcooling and Thermostats
- Fans, Belts and Warning Indicators — Free Study Guide 2026
- Oil Pressure and Lubrication Fault Diagnosis
- Oil Pump, Cooler and Oil/Filter Service
- Radiators, Caps and Recovery Systems — Free Study Guide 2026