Study guide

NCCCO Rigger Level II study guide

Read a lesson, then practice the ideas you want to remember.

Lessons

  1. Horizontal Forces and Attachment Demand
  2. Length-to-Height Geometry and Headroom — Free Study Guide 2026
  3. Two-Leg Tension and Angle Reference — Free Study Guide 2026
  4. Current Exam, Eligibility and Scheduling
  5. Practical Tasks and Examination-Specific Rul
  6. Study Method, References and Recertification
  7. Hooks, Latches and Permitted Load Seating
  8. Master Links, Rings and Swivels — Free Study Guide 2026
  9. Shackle Types, Pin Seating and Side Loading
  10. Controlled Rotation, Upending and Multiple-C
  11. Secure the Load, Remove Rigging and Stow Equ
  12. Take-Up, Trial Lift and Load Control — Free Study Guide 2026
  13. A-Frames, Gantries and Trolley Compatibility
  14. Jacks, Toe Ratings and Positive Support
  15. Dollies, Skates, Rollers and Horizontal Cont
  16. Choker Hitches, Choke Angle and Bundles
  17. Softeners, Bend Protection and Cut Protectio
  18. Vertical and Basket Hitch Capacity — Free Study Guide 2026
  19. Air and Electric Hoists: Supply, Duty and Co
  20. Lever Hoists, Pulling Direction and Controll
  21. Manual Chain Falls and Vertical Hoisting
  22. Below-the-Hook Device Inspection and Testing
  23. Hook and Rigging-Hardware Inspection — Free Study Guide 2026
  24. Inspecting All Six Sling Families — Free Study Guide 2026
  25. Lift Director, Qualified Rigger and Hazard C
  26. Equipment Operator Duties and Capacity Decis
  27. Signalperson Duties and Reliable Signals
  28. Turnbuckles and Chain Hardware in Adjustable
  29. Eyebolts, Shoulder Seating and Angular Deman
  30. Swivel Hoist Rings and Installation Torque
  31. Attachment Points and Complete Force Paths
  32. Center of Gravity and Suspended Stability
  33. Final Position, Landing Supports and Deriggi
  34. Composition, Structural Integrity and Specia
  35. Load Identity, Dimensions and Units — Free Study Guide 2026
  36. Load Weight, Density and Complete Inventorie
  37. Alloy-Chain Assemblies and Approved Adjustme
  38. Metal-Mesh Slings: Selection, Contact and Re
  39. Select and Use Wire-Rope Slings — Free Study Guide 2026
  40. Critical-Lift Criteria, Risk and Contingenci
  41. Determine Equipment Requirements and Compati
  42. Written Plans, Sequence and Change Control
  43. Rigging Blocks, Resultants and Reeving — Free Study Guide 2026
  44. Wedge Sockets, Rope Alignment and Tail Secur
  45. Wire-Rope Clips and Permitted Terminations
  46. Power Lines, Clearance Options and Electrica
  47. Weather, Temperature and Ground Conditions
  48. Travel Path, Clearance and Work-Zone Control
  49. Scrap and Material-Handling Grapples — Free Study Guide 2026
  50. Close-Proximity and Remotely Operated Liftin
  51. Mechanical and Vacuum Lifting Devices — Free Study Guide 2026
  52. Beam Clamps as Attachments and Beam/Girder L
  53. Lifting Beams, Spreaders and Configuration R
  54. Plate Clamps, Material Limits and Grip Condi
  55. Crane Charts, Suspended Weight and Capacity
  56. Personnel Hoisting Under OSHA 1926.1431
  57. Apply the Correct Standard and Regulatory Sc
  58. Roundslings, Core Protection and Performance
  59. Synthetic-Rope Slings and Approved Splices
  60. Synthetic-Web Slings and Material Compatibil
  61. Composite Center of Gravity by Moments — Free Study Guide 2026
  62. Three- and Four-Leg Assemblies and Load Shar
  63. Off-Center Reactions and Compatible Sling Ge